Browse > Article
http://dx.doi.org/10.12989/anr.2019.7.1.025

Porosity-dependent asymmetric thermal buckling of inhomogeneous annular nanoplates resting on elastic substrate  

Salari, Erfan (Mechanical Engineering Department, Amirkabir University of Technology)
Ashoori, Alireza (Mechanical Engineering Department, Amirkabir University of Technology)
Vanini, Seyed Ali Sadough (Mechanical Engineering Department, Amirkabir University of Technology)
Publication Information
Advances in nano research / v.7, no.1, 2019 , pp. 25-38 More about this Journal
Abstract
This research is aimed at studying the asymmetric thermal buckling of porous functionally graded (FG) annular nanoplates resting on an elastic substrate which are made of two different sets of porous distribution, based on nonlocal elasticity theory. Porosity-dependent properties of inhomogeneous nanoplates are supposed to vary through the thickness direction and are defined via a modified power law function in which the porosities with even and uneven type are approximated. In this model, three types of thermal loading, i.e., uniform temperature rise, linear temperature distribution and heat conduction across the thickness direction are considered. Based on Hamilton's principle and the adjacent equilibrium criterion, the stability equations of nanoporous annular plates on elastic substrate are obtained. Afterwards, an analytical solution procedure is established to achieve the critical buckling temperatures of annular nanoplates with porosities under different loading conditions. Detailed numerical studies are performed to demonstrate the influences of the porosity volume fraction, various thermal loading, material gradation, nonlocal parameter for higher modes, elastic substrate coefficients and geometrical dimensions on the critical buckling temperatures of a nanoporous annular plate. Also, it is discussed that because of present of thermal moment at the boundary conditions, porous nanoplate with simply supported boundary condition doesn't buckle.
Keywords
nanoporous annular nanoplates; asymmetric buckling; thermal loading; analytical solution; nonlocal theory;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 Shahba, A., Attarnejad, R. and Hajilar, S. (2011), "Free vibration and stability of axially functionally graded tapered Euler-Bernoulli beams", Shock Vib., 18(5), 683-696.   DOI
2 She, G.-L., Ren, Y.-R., Yuan, F.-G. and Xiao, W.-S. (2018), "On vibrations of porous nanotubes", Int. J. Eng. Sci., 125, 23-35.   DOI
3 Shen, J., Wang, H. and Zheng, S. (2018), "Size-dependent pull-in analysis of a composite laminated micro-beam actuated by electrostatic and piezoelectric forces: Generalized differential quadrature method", Int. J. Mech. Sci., 135, 353-361.   DOI
4 Shojaeefard, M.H., Googarchin, H.S., Ghadiri, M. and Mahinzare, M. (2017), "Micro temperature-dependent FG porous plate: free vibration and thermal buckling analysis using modified couple stress theory with CPT and FSDT", Appl. Math. Model., 50, 633-655.   DOI
5 Wang, C. and Wang, C.Y. (2004), Exact Solutions for Buckling of Structural Members, CRC press.
6 Wang, Q., Shi, D., Liang, Q. and Shi, X. (2016), "A unified solution for vibration analysis of functionally graded circular, annular and sector plates with general boundary conditions", Compos. Part B: Eng., 88, 264-294.   DOI
7 Wattanasakulpong, N. and Ungbhakorn, V. (2014), "Linear and nonlinear vibration analysis of elastically restrained ends FGM beams with porosities", Aerosp. Sci. Technol., 32(1), 111-120.   DOI
8 Zhu, C.-S., Fang, X.-Q., Liu, J.-X. and Li, H.-Y. (2017), "Surface energy effect on nonlinear free vibration behavior of orthotropic piezoelectric cylindrical nano-shells", Eur. J. Mech.-A/Solids, 66, 423-432.   DOI
9 Wattanasakulpong, N. and Chaikittiratana, A. (2015), "Flexural vibration of imperfect functionally graded beams based on Timoshenko beam theory: Chebyshev collocation method", Meccanica, 50(5), 1331-1342.   DOI
10 Zhang, X., Qian, Y., Zhu, Y. and Tang, K. (2014), "Synthesis of Mn 2 O 3 nanomaterials with controllable porosity and thickness for enhanced lithium-ion batteries performance", Nanoscale, 6(3), 1725-1731.   DOI
11 Wang, Q. (2005), "Wave propagation in carbon nanotubes via nonlocal continuum mechanics", J. Appl. Phys., 98(12), 124301.   DOI
12 Demir, C., Mercan, K. and Civalek, O. (2016), "Determination of critical buckling loads of isotropic, FGM and laminated truncated conical panel", Compos. Part B: Eng., 94, 1-10.   DOI
13 Civalek, O. (2006), "The determination of frequencies of laminated conical shells via the discrete singular convolution method", J. Mech. Mater. Struct., 1(1), 163-182.   DOI
14 Civalek, O. (2008), "Analysis of thick rectangular plates with symmetric cross-ply laminates based on first-order shear deformation theory", J. Compos. Mater., 42(26), 2853-2867.   DOI
15 Civalek, O. (2013), "Nonlinear dynamic response of laminated plates resting on nonlinear elastic foundations by the discrete singular convolution-differential quadrature coupled approaches", Compos. Part B: Eng., 50, 171-179.   DOI
16 Civalek, O. and Demir, C. (2011), "Buckling and bending analyses of cantilever carbon nanotubes using the euler-bernoulli beam theory based on non-local continuum model", Asian J. Civil Eng., 12(5), 651-661.
17 Dastjerdi, S. and Akgoz, B. (2018), "New static and dynamic analyses of macro and nano FGM plates using exact threedimensional elasticity in thermal environment", Compos. Struct., 192, 626-641.   DOI
18 Ebrahimi, F. and Salari, E. (2016a), "Effect of various thermal loadings on buckling and vibrational characteristics of nonlocal temperature-dependent functionally graded nanobeams", Mech. Adv. Mater. Struct., 23(12), 1379-1397.   DOI
19 Ebrahimi, F. and Salari, E. (2015a), "Thermal buckling and free vibration analysis of size dependent Timoshenko FG nanobeams in thermal environments", Compos. Struct., 128, 363-380.   DOI
20 Ebrahimi, F. and Salari, E. (2015b), "Thermo-mechanical vibration analysis of nonlocal temperature-dependent FG nanobeams with various boundary conditions", Compos. Part B: Eng., 78, 272-290.   DOI
21 Ashoori, A. and Vanini, S.S. (2016b), "Nonlinear thermal stability and snap-through behavior of circular microstructure-dependent FGM plates", Eur. J. Mech.-A/Solids, 59, 323-332.   DOI
22 Ashoori, A. and Vanini, S.S. (2017a), "Nonlinear bending, postbuckling and snap-through of circular size-dependent functionally graded piezoelectric plates", Thin-Wall. Struct., 111, 19-28.   DOI
23 Civalek, O. (2017), "Free vibration of carbon nanotubes reinforced (CNTR) and functionally graded shells and plates based on FSDT via discrete singular convolution method", Compos. Part B: Eng., 111, 45-59.   DOI
24 Bagheri, H., Kiani, Y. and Eslami, M. (2017), "Asymmetric thermal buckling of annular plates on a partial elastic foundation", J. Thermal Stresses, 40(8), 1015-1029.   DOI
25 Ashoori, A. and Vanini, S.S. (2017b), "Vibration of circular functionally graded piezoelectric plates in pre-/postbuckled configurations of bifurcation/limit load buckling", Acta Mechanica, 228(9), 2945-2964.   DOI
26 Ashoori, A., Salari, E. and Vanini, S.S. (2016), "Size-dependent thermal stability analysis of embedded functionally graded annular nanoplates based on the nonlocal elasticity theory", Int. J. Mech. Sci., 119, 396-411.   DOI
27 Ashoori, A., Vanini, S.S. and Salari, E. (2017), "Size-dependent axisymmetric vibration of functionally graded circular plates in bifurcation/limit point instability", Appl. Phys. A, 123(4), 226.   DOI
28 Avcar, M. (2016), "Effects of material non-homogeneity and two parameter elastic foundation on fundamental frequency parameters of timoshenko beams", Acta Physica Polonica A, 130(1), 375-378.   DOI
29 Aydogdu, M., Arda, M. and Filiz, S. (2018), "Vibration of axially functionally graded nano rods and beams with a variable nonlocal parameter", Adv. Nano Res., Int. J., 6(3), 257-278.
30 Bagheri, H., Kiani, Y. and Eslami, M. (2018), "Asymmetric thermal buckling of temperature dependent annular FGM plates on a partial elastic foundation", Comput. Math. Applicat., 75(5), 1566-1581.   DOI
31 Baltacioglu, A.K., Akgoz, B. and Civalek, O. (2010), "Nonlinear static response of laminated composite plates by discrete singular convolution method", Compos. Struct., 93(1), 153-161.   DOI
32 Baltacioglu, A., Civalek, O., Akgoz, B. and Demir, F. (2011), "Large deflection analysis of laminated composite plates resting on nonlinear elastic foundations by the method of discrete singular convolution", Int. J. Press. Vessels Piping, 88(8-9), 290-300.   DOI
33 Chen, W.J. and Li, X.P. (2013), "Size-dependent free vibration analysis of composite laminated Timoshenko beam based on new modified couple stress theory", Arch. Appl. Mech., 83(3), 431-444.   DOI
34 Bedroud, M., Nazemnezhad, R. and Hosseini-Hashemi, S. (2015), "Axisymmetric/asymmetric buckling of functionally graded circular/annular Mindlin nanoplates via nonlocal elasticity", Meccanica, 50(7), 1791-1806.   DOI
35 Bouadi, A., Bousahla, A.A., Houari, M.S.A., Heireche, H. and Tounsi, A. (2018), "A new nonlocal HSDT for analysis of stability of single layer graphene sheet", Adv. Nano Res., Int. J., 6(2), 147-162.
36 Brush, D.O. and Almroth, B.O. (1975), Buckling of Bars, Plates, and Shells, New York, McGraw-Hill Book Co.
37 Akgoz, B. and Civalek, O. (2011a), "Nonlinear vibration analysis of laminated plates resting on nonlinear two-parameters elastic foundations", Steel Compos. Struct., Int. J., 11(5), 403-421.   DOI
38 Akgoz, B. and Civalek, O. (2011b), "Buckling analysis of cantilever carbon nanotubes using the strain gradient elasticity and modified couple stress theories", J. Computat. Theor. Nanosci., 8(9), 1821-1827.   DOI
39 Akgoz, B. and Civalek, O. (2016), "Static and dynamic response of sector-shaped graphene sheets", Mech. Adv. Mater. Struct., 23(4), 432-442.   DOI
40 Ashoori, A. and Vanini, S.S. (2016a), "Thermal buckling of annular microstructure-dependent functionally graded material plates resting on an elastic medium", Compos. Part B: Eng., 87, 245-255.   DOI
41 Ebrahimi, F. and Salari, E. (2016b), "Thermal loading effects on electro-mechanical vibration behavior of piezoelectrically actuated inhomogeneous size-dependent Timoshenko nanobeams", Adv. Nano Res., Int. J., 4(3), 197-228.   DOI
42 Fang, X.-Q. and Zhu, C.-S. (2017), "Size-dependent nonlinear vibration of nonhomogeneous shell embedded with a piezoelectric layer based on surface/interface theory", Compos. Struct., 160, 1191-1197.   DOI
43 Ebrahimi, F., Ghasemi, F. and Salari, E. (2016), "Investigating thermal effects on vibration behavior of temperature-dependent compositionally graded Euler beams with porosities", Meccanica, 51(1), 223-249.   DOI
44 Ehyaei, J., Ebrahimi, F. and Salari, E. (2016), "Nonlocal vibration analysis of FG nano beams with different boundary conditions", Adv. Nano Res., Int. J., 4(2), 85-111.
45 Eringen, A.C. (1983), "On differential equations of nonlocal elasticity and solutions of screw dislocation and surface waves", J. Appl. Phys., 54(9), 4703-4710.   DOI
46 Fang, X.-Q., Zhu, C.-S., Liu, J.-X. and Liu, X.-L. (2018a), "Surface energy effect on free vibration of nano-sized piezoelectric double-shell structures", Physica B: Condensed Matter, 529, 41-56.   DOI
47 Fang, X.-Q., Zhu, C.-S., Liu, J.-X. and Zhao, J. (2018b), "Surface energy effect on nonlinear buckling and postbuckling behavior of functionally graded piezoelectric cylindrical nanoshells under lateral pressure", Mater. Res. Express, 5(4), 045017.   DOI
48 Li, L. and Hu, Y. (2017), "Post-buckling analysis of functionally graded nanobeams incorporating nonlocal stress and microstructure-dependent strain gradient effects", Int. J. Mech. Sci., 120, 159-170.   DOI
49 Gurses, M., Civalek, O ., Korkmaz, A.K. and Ersoy, H. (2009), "Free vibration analysis of symmetric laminated skew plates by discrete singular convolution technique based on first-order shear deformation theory", Int. J. Numer. Methods Eng., 79(3), 290-313.   DOI
50 Kiani, Y. and Eslami, M. (2013), "An exact solution for thermal buckling of annular FGM plates on an elastic medium", Compos. Part B: Eng., 45(1), 101-110.   DOI
51 Mercan, K. and Civalek, O. (2017), "Buckling analysis of Silicon carbide nanotubes (SiCNTs) with surface effect and nonlocal elasticity using the method of HDQ", Compos. Part B: Eng., 114, 34-45.   DOI
52 Lu, C., Lim, C.W. and Chen, W. (2009), "Size-dependent elastic behavior of FGM ultra-thin films based on generalized refined theory", Int. J. Solids Struct., 46(5), 1176-1185.   DOI
53 Mechab, B., Mechab, I., Benaissa, S., Ameri, M. and Serier, B. (2016), "Probabilistic analysis of effect of the porosities in functionally graded material nanoplate resting on Winkler-Pasternak elastic foundations", Appl. Math. Model., 40(2), 738-749.   DOI
54 Mercan, K. and Civalek, O. (2016), "DSC method for buckling analysis of boron nitride nanotube (BNNT) surrounded by an elastic matrix", Compos. Struct., 143, 300-309.   DOI
55 Reddy, J. (2007), "Nonlocal theories for bending, buckling and vibration of beams", Int. J. Eng. Sci., 45(2-8), 288-307.   DOI