• Nuclear Engineering and Technology
• /
• v.38 no.8
• /
• pp.697-732
• /
• 2006

In this paper, a historical review of the developments in the safety of LWR power plants is presented. The paper reviews the developments prior to the TMI-2 accident, i.e. the concept of the defense in depth, the design basis, the large LOCA technical controversies and the LWR safety research programs. The TMI-2 accident, which became a turning point in the history of the development of nuclear power is described briefly. The Chernobyl accident, which terrified the world and almost completely curtailed the development of nuclear power is also described briefly. The great international effort of research in the LWR design-base and severe accidents, which was, respectively, conducted prior to and following the TMI-2 and Chernobyl accidents is described next. We conclude that with the knowledge gained and the improvements in plant organisation/management and in the training of the staff at the presently-installed nuclear power stations, the LWR plants have achieved very high standards of safety and performance. The Generation 3+LWR power plants, next to be installed, may claim to have reached the goal of assuring the safety of the public to a very large extent. This review is based on the historical developments in LWR safety that occurred primarily in USA, however, they are valid for the rest of the Western World. This review can not do justice to the many fine contributions that have been made over the last fifty years to the cause of LWR safety. We apologize if we have not mentioned them. We also apologize for not providing references to many of the fine investigations, which have contributed towards LWR safety earning the conclusions that we describe just above.

• Journal of Power Electronics
• /
• v.9 no.1
• /
• pp.93-99
• /
• 2009

A new plasma display panel sustaining driver using single side sustaining technique with a dual resonant method is proposed in this paper. Since this circuit enables to keep device voltage stress same as the prior circuit, it can be a low cost circuit compared to a conventional driver. To integrate the sustaining function into one side with a single power source in the driver, a charge pump method is adopted to make negative sustaining voltage and to achieve dual resonant energy recovery on the sustaining modes.

• Food Science and Industry
• /
• v.51 no.4
• /
• pp.325-333
• /
• 2018

If private discipline replace the strict administrative regulation, fundamental rights of protective essence can be relativized while if may be beneficial for the individual freedom. Assigning the state power to the private organization is equivalent to giving up the practice of individual liberty to the organized authority. It is important to make use of public law mechanism, particularly under the imperfect juristic system. Regarding the prohibition of prior censorship, it is necessary to consider whether it is desirable to prioritize the freedom of speech over the rest of the legal benefit. Apart from this necessity, new advertisement screening mechanism was irreversibly - and controversially - introduced for the health functional food since the unconstitutional verdict of the prior screening of advertisements. With this, the state must secure the broad order through legal regulations and norms in order to freedom of speech and other legal benefit can be harmoniously and practically guaranteed.

• Journal of Food Hygiene and Safety
• /
• v.14 no.4
• /
• pp.365-371
• /
• 1999

Microwave-assisted extraction (MAE) is known as a more environmental-friendly process with economic advantages in terms of less time, less solvent, less energy and less waste than the current reflux method that is time-consuming. MAE was applied to extract three pesticides (quintozene, tolclofos-methyl and procymidone) from ginseng in a pesticide residue analysis and eliminate pesticide contaminants from ginseng prior to production of the ginseng extracts. The optimal conditions for pesticide extraction from ginseng were 50% in power (150 watts), 2 minutes, 20 mL hexane and 2.0 g sample. The results of optimal conditions were compared with those of Soxhlet method (7 hours, 150 mL hexane). The recoveries between two methods were almost same while time and amount of solvent used in MAE were significantly decreased in comparing with those in the Soxhlet methods. When the 45% ethyl alcohol as a extraction solvent was applied to eliminate pesticides from ginseng prior to the production of the ginseng extracts, it was found that 100% quintozene, 69％ tolclofos-methyl and 83% procymidone were eliminated from ginseng. The data showed that MAE may be used to eliminate pesticide contaminants in ginseng prior to making the ginseng extracts.

• Journal of the Korean Data and Information Science Society
• /
• v.15 no.4
• /
• pp.743-752
• /
• 2004

In this paper, we develop the Bayesian model selection procedure using the reference prior for comparing two nested model such as the independent and intraclass models using the distance or divergence between the two as the basis of comparison. A suitable criterion for this is the power divergence measure as introduced by Cressie and Read(1984). Such a measure includes the Kullback -Liebler divergence measures and the Hellinger divergence measure as special cases. For this problem, the power divergence measure turns out to be a function solely of $\rho$, the intraclass correlation coefficient. Also, this function is convex, and the minimum is attained at $\rho=0$. We use reference prior for $\rho$. Due to the duality between hypothesis tests and set estimation, the hypothesis testing problem can also be solved by solving a corresponding set estimation problem. The present paper develops Bayesian method based on the Kullback-Liebler and Hellinger divergence measures, rejecting $H_0:\rho=0$ when the specified divergence measure exceeds some number d. This number d is so chosen that the resulting credible interval for the divergence measure has specified coverage probability $1-{\alpha}$. The length of such an interval is compared with the equal two-tailed credible interval and the HPD credible interval for $\rho$ with the same coverage probability which can also be inverted into acceptance regions of $H_0:\rho=0$. Example is considered where the HPD interval based on the one-at- a-time reference prior turns out to be the shortest credible interval having the same coverage probability.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.663-668
• /
• 1990

This paper deals with the application of a Generalized Predictive Control (CPC) to a Pressurized Water Reactor (P.W.R) Nuclear Power Plant. Generalized Predictive Control is a sort of Explicit Self-Tuning Control. Current self-tuning algorithms lack robustness to prior choices of either dead-time (input time delay of a plant) or model order. GPC is shown by simulation studies to be superior to accepted self-tuning techniques such as minimum variance and pole-placement from the viewpoint that it is robust to prior choices of dead-time or model order. In this paper a GPC controller is designed to control the P.W.R. nuclear power rlant with varying dead-time and through the designing procedure the designer is free from the constraint of knowing the exact dead-time. The controller is constructed based on the 2nd order linear model approximated in the vicinity of operating point. To ensure that this low-order model describes the complex real dynamics well enough for control purposes, model parameters are updated on-line with a Recursive Least Squares algorithm. Simulation results are successful and show the possibilities of the GPC control application to actual plants with varying or unknown dead-time.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.4
• /
• pp.579-584
• /
• 2009

This paper describes a power quality analysis of a photovoltaic generating systems. Prior to the power measurement, domestic and foreign codes related to the photovoltaic generating systems were briefly summarized. After constructing about 5 kW photovoltaic systems, input/output voltages and currents were measured to compare and analyze the power quality by the module type. Based on the measured values, a couple of factors such as active power, power factor, total harmonic distortion(THD) was calculated and analyzed.

• Proceedings of the KIEE Conference
• /
• 2005.05a
• /
• pp.96-98
• /
• 2005

This paper describes a monitoring system that monitors power quality and undesirable accidents when distributed generations are connected to the power grid. Prior to develop and operate a physical monitoring system, we constitute a simulation device to simulate the monitoring processes for the situations. The simulation system consists of the server and the client that connected by communication line. This system has various functions to monitor the power quality and the connection situation. Those functions are generation, transmission, acquisition and analysis of the simulated power data. This research seems very important to get the reliable and intelligent connection algorithm through the result of simulated monitoring system. Also hereafter, as this system uses the remote monitoring system through network and constitute the data base(DB), it will play an important role in building the automation of power system efficiently and systematically.

• Journal of the Korea Safety Management & Science
• /
• v.11 no.2
• /
• pp.197-203
• /
• 2009

The purposes of this research are investigating the domestic and foreign situations and presenting methods to be able to raise the competitiveness of the power IT industry. For the analysis of domestic situations, 70 companies related with power IT were surveyed. Thus, the problems the power IT industry is now facing are summarized and solutions for them are also suggested. If these solutions are practiced, the power industry could provide higher quality electricity and belong to the prior group of global power society.

• Proceedings of the Technology Innovation Conference
• /
• 1999.06a
• /
• pp.176-202
• /
• 1999

Korea has exerted her efforts to assimilate nuclear power technology, and reportedly localized 95 percent of nuclear power technology by 1995. This paper investigates the evolution of nuclear power program in Korea to exploit the development process of the nuclear power industry and key factors for the technological localization of nuclear power plant. In developing countries, an imitative catching-up process can be shown as a course for developing the absorptive capacity of foreign technology, which depends on prior knowledge base and the intensity of effort. The process of technological learning consists of five stages including preparation, implementation of foreign technology, acquisition of peripheral technology, acquisition of core technology, and improvement f foreign technology. Moreover, this paper discusses six essential factors that have influenced the successful achievement of technological localization of nuclear power plants in Korea. They include the role and strategies of the government, the leading role of utility firm, the development and cooperation of the related organizations, the development of human resources and their efforts, market conditions and the assistance of foreign donors, and social conditions. Finally, this paper discusses about implications offered by the Korean experience for other developing countries.