• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.437-442
• /
• 2005

This paper deals with the measurement and analysis of radio characteristic of 424 MHz for using the automation of transmission and supply of electric power, ana automatic meter reading(AMR). Normally radio propagation characteristic is the base of system design, performance evaluation and choice of position of the base station in wireless communication. It is the most accurate way to design a base station through practical measurements, but it costs much time, money and engineers. So, we developed 424 MHz short range wave propagation model for AMR service.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.15 no.2
• /
• pp.55-60
• /
• 1979

The forming and design method of single power factor meter is suggested and the sensitive phase angle detect circuit of current and voltage of load was dealt with. In this paper, in order to control and detect of phase angle of the current and voltage, operational amplifier comparator circuit and R-C phase shift circuit was used, and to detect the controlled voltage wave form, the transister chopper pair circuit was used. The test result of this power factor meter was good and reliable at the full range of power factor.

• Proceedings of the KIEE Conference
• /
• 2002.07a
• /
• pp.238-240
• /
• 2002

This paper proposes an advanced digital kwh-meter, which records voltage management data, load management data as well as the existing kwh data. This meter supports the requests from DRMS (Distribution Remote Management System) which include kwh meter reading, voltage management data reading, and load management data reading request, it can enhance greatly the economics of the existing remote meter reading system. Also it can improve highly the quality of power supplied to the electric customer by minimizing the voltage management cost and by enhancing the efficiency of load management.

• Proceedings of the KIEE Conference
• /
• 1999.07b
• /
• pp.800-802
• /
• 1999

The meters for low voltage customer presently being used in Korea are all mechanical type and there is strict limitation on applying various customized tariff structure. Recently low voltage solid state meter is under development by several makers of the watt hour meter in Korea. Also, KEPCO has a plan to use the solid state meter for low voltage customer to reduce peak power. So, this paper suggests the needed function of low voltage solid state meter considering electricity tariff policy.

• Proceedings of the KIEE Conference
• /
• 1998.07b
• /
• pp.760-762
• /
• 1998

Due to the reinforcement of government's DSM(Demand Side Management) policy. Solid State Meter was introduced in Korea since 1993 and it is applied to the high voltage customer exceeding 100kW in order to equalize daily load curve. In recent days, KEPCO has a Plan to use the Solid State Meter which has a data recording and remote meter-reading function for low voltage customer to introduce the real-time pricing system and reduce peak power in the near future. So, this paper suggests the specification and function of Solid State Meter.

• Proceedings of the KIEE Conference
• /
• 2006.04a
• /
• pp.168-170
• /
• 2006

In this paper, authors realize water AMR(Automatic Meter Reading) network using low power ZigBee protocol included routing ability for improving wireless communitation error detection and network range. ZigBee wireless standard is an important standard of the field related Ubiquitous industry and recently has application to Home-Network. It's special features are to spend low power and to include routing ability each terminator. Because of these features, authors realize water AMR system on Embedded system using ZigBee protocol for applying to transfer data between a water meter and RF module equipped with a water meter in each house.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.941-943
• /
• 2013

A standardized communication protocol is required to exchange the data of electric charge and current-using electric power through the two-way communications between the smart meter and electric power supplier. In this paper, a two-way communications technologies is designed for control technologies and de/registration services of electric equipment, and the international communication protocols is applied to the communications technologies.

• Proceedings of the KIEE Conference
• /
• 2004.11b
• /
• pp.166-168
• /
• 2004

전력선 통신은 전기공급을 위해 기존에 설치되어 있는 전력선을 그대로 이용한 것으로 통신망을 새롭게 설치할 필요가 없다는 편의성 및 경제적 잇점을 가지고 있다. 최근 전력선 통신 기술은 홈오토메이션, 자동원격 검침, 원격모니터링에 적합한 기술로 주목받고 있다. 특히 전력선통신을 이용한 전력 감시시스템의 구축도 가능할 것으로 보여진다. 본 논문에서는 기존의 전력선 모뎀과 전력 측정 장비인 ACM meter를 이용하여 감시 시스템을 구성하였고, 전력선 모뎀과 ACM meter의 연계를 위하여 8051 kit를 자체 제작하여 ACM meter의 측정 데이터가 전력선 모뎀을 거쳐 컴퓨터에 모니터링 되도록 함으로써 차후 전력선 통신을 이용한 원격 감시시스템의 가능성을 연구하였다.

• The KSFM Journal of Fluid Machinery
• /
• v.6 no.1 s.18
• /
• pp.57-65
• /
• 2003

The measurement uncertainties of an ultrasonic flowmeter were analyzed to evaluate its applicability to the measurement of the steam generator feedwater flow-rate in a nuclear power plant. The analyses of measurement uncertainties of a reactor power were also performed with the analyses of feedwater flow measurement uncertainties. Two ultrasonic flowmeters based on a cross-correlation technique and a transit time method were used in this study. The ultrasonic flowmeters were installed on a feedwater pipe line of a typical 1000 MWe Korea-standardized nuclear power plant to take the necessary data. The results have shown that the measurement uncertainties of the ultrasonic flowmeters are adequately smaller than those or a venturi meter. The research has also indicated that the measurement uncertainties of the reactor power based on the ultrasonic flowmeter uncertainties are sufficiently bounded by the uncertainty range usually assumed in nuclear safety analyses.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.2124-2125
• /
• 2006

실세계의 복잡하고 종합적인 정보를 빠르고 효율적으로 분석 처리할 수 있는 지리정보시스템(GIS : Geographic Information System)의 효용성이 인식되면서 전력산업에서도 전국의 시설물 관리를 위해 수치 지리정보를 구축하였다. 한편, 약 10만호의 고압고객을 대상으로 15분 단위의 전력사용량을 무선통신망을 이용하여 자동원격검침(AMR: Automatic Meter Reading)하고 있다. 본 논문에서는 산재된 대용량의 AMR 시계열성 데이터와 공간성을 지니는 배전계통 지리정보 데이터를 이용하여 회선 및 구간별 상세한 부하패턴 분석, 공간적 부하분포 및 특성 분석을 할 수 있는 새로운 활용모델을 개발하고 그 결과를 제시하고자 한다.