• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.3
• /
• pp.253-259
• /
• 2003

This paper aims at developing remote control system to control and monitor distributed various devices such as UPS through internet. TCP/IP(Transmission Control Protocol/Internet Protocol) and UPS operated in a row are adopted for the network management protocol and the application device, respectively. For controlling and monitoring distributed devices in realtime, java-environment software is constructed. Also, HelloDevice, general-use interface controller between network device and applied device is proposed. Finally, serial communication such as RS-232C is used between controller and applied device.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.904-907
• /
• 2013

Demand Controller is a control device that if current electric power consumption seems to exceed the targeted amount of electric power, block the connected load devices. When this ON/OFF way is applied to electric power management of electric furnace, start and stop operation of inverter and an electric heater which supplying electric power is being performed repeatedly. This has a problem of life-shortening of inverter and an electric heater by electrical damage. In addition, when electric power supplying is blocked, attemperation is not allowed until return to normal operation condition. In this paper, we develop power management system for electric furnace using the electric furnace remote controller. This system provides the automatic control for approved electric power to electric furnace organically and prevent electric damage of inverter and an electric heater through continuous electric power supply within the targeted amount of electric power.

• Journal of Communications and Networks
• /
• v.18 no.4
• /
• pp.589-599
• /
• 2016

Most existing resource management problem models arise from the original desire of allocating resources in either a user-centric or network-centric manner. The difference between their objectives is obvious: user-centric methods attempt to optimize the utility of individual users, whereas network-centric models intend to optimize the collective utilities of the entire network. In this paper, from the above two aspects, we analyze the robust power control problem in device-to-device (D2D) communication underlaying cellular networks, where two types of channel uncertainty set (e.g., ellipsoidal and column-wise) are considered. In the user-centric method, we formulate the problem into the form of a Stackelberg game, where the energy efficiency (EE) of each user is the ingredient of utility function. In order to protect the cellular user equipment's (CUE) uplink transmission, we introduce a price based cost function into the objectives of D2D user equipment (DUE). The existence and uniqueness of the game with the influence of channel uncertainty and price are discussed. In the network-centric method, we aim to maximize the collective EE of CUEs and DUEs. We show that by the appropriate mathematical transformation, the network-centric D2D power control problem has the identical local solution to that of a special case of the user-centric problem, where price plays a key role. Numerical results show the performance of the robust power control algorithms in the user-centric and network-centric models.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.11
• /
• pp.1603-1611
• /
• 2021

As IMO environmental regulations are tightened, the need to establish a system that can reduce emissions is increasing, and for this purpose, various power control management systems have been studied and implemented as a new energy management system for ships. In this study, we design a control process through modeling for Bi-Directional Converter (BDC) application with bi-directional power flow to link batteries, which are energy storage devices, to conventional generator power systems, and propose mechanisms for batteries optimized for varying loads. This work models MATLAB/Simulink as a BDC and simulates current control and state of charge (SOC) optimization at the time of charging and discharging batteries according to load scenarios. Through this, the battery, power, and load were interlocked so that the generator operated on board could be operated in the optimal operation range, and power control management was performed to enable the generator to operate in the high fuel efficiency range.

• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.3
• /
• pp.15-22
• /
• 2019

In these days, importance of the power electronic devices and modules keeps increasing due to electric vehicles and energy saving requirements. However, current silicon-based power devices showed several limitations. Therefore, wide band gap (WBG) semiconductors such as SiC, GaN, and $Ga_2O_3$ have been developed to replace the silicon power devices. WBG devices show superior performances in terms of device operation in harsh environments such as higher temperatures, voltages and switching speed than silicon-based technology. In power devices, the reliability of the devices and module package is the critically important to guarantee the normal operation and lifetime of the devices. In this paper, we reviewed the recent trends of the power devices based on WBG semiconductors as well as expected future technology. We also presented an overview of the recent package module and fabrication technologies such as direct bonded copper and active metal brazing technology. In addition, the recent heat management technologies of the power modules, which should be improved due to the increased power density in high temperature environments, are described.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.423-424
• /
• 2016

Recently, the mass production of Energy storage system (ESS) is actively perform around world. Energy storage system is a technique that stores power to energy storage device to supply energy into grid and load at peak-load. Therefore, the efficient energy management is available by using ESS system. The life of Lithium-ion battery is varied corresponding to the power usage, especially selected depth of discharge (DOD). The lifetime of battery is the one of the most issue of the ESS system because of its stability and reliability. Therefore, lifetime management of battery and power converter of ESS module is required. In this paper, the battery lifetime management method estimating residual power and lifetime of lithium ion battery of ESS system is proposed. Also, total avenue prediction of ESS system is simulated considering the total lifetime of battery.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.4A
• /
• pp.393-401
• /
• 2006

Energy consumption is an important design parameter for battery-operated embedded systems. Dynamic power management is one of the most well-known low-power design techniques. This paper proposes an online realtime scheduling algorithm, which we call energy-aware realtime scheduling using slack stealing (EARSS). The proposed algorithm gives the highest priority to the task with the largest degree of device overlap when the slack time exists. Scheduling result enables an efficient power management by reducing the number of state transitions. Experimental results show that the proposed algorithm can save the energy by 23% on average compared to the DPM-enabled system scheduled by the EDF algorithm.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.6
• /
• pp.840-844
• /
• 2013

In this study, we try to estimate vascular compliance for management vascular disease. Because It is known the vascular compliance represents the state of the blood vessels. In general, the vascular compliance is estimated using an acceleration photoplethymogram from measured by photoplethymogram-based. The acceleration photoplethymogram is come from second derivative of photoplethymogram. By using the acceleration photoplethymogram, we can estimating vascular compliance, vascular age, vascular state. In this study, for measuring acceleration photoplethymogram we have developed a measurement device having analog filters. It has the advantage of miniaturization, low-power because it is simpler than digital filters. Using the developed device, we have estimated vascular compliance and tested the reliability of our device compare with conventional device having digital filters. As a result.

• The Journal of Korean Association of Computer Education
• /
• v.13 no.1
• /
• pp.53-64
• /
• 2010

In this paper, we tried to enable a mobile device as a resource to access to mobile grid networks. By advanced Internet techniques, the use of mobile devices has been rapidly increased. Some researches in mobile grid computing tried to combine grid computing with mobile devices. However, according to intrinsic properties of mobile environments, mobile devices have many considerations, such as mobility management, disconnected operation, device heterogeneity, service discovery, resource sharing, security, and so on. To solve these problems, there are two trends for mobile grid computing: a proxy-based mobile grid architecture and an agent-based mobile grid architecture. We focus on a proxy-based mobile grid architecture with IP-paging, which can easily manage idle mobile devices and grid resource status information. Also, we use SIP(Session Initiation Protocol)to support mobility management, mobile grid services. We manage variation of mobile device state and power by paging cache. Finally, using the candidate set and the reservation set of resources, we perform task migration. The performance evaluation by simulation, shows improvement of efficiency and stability during execution.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.479-482
• /
• 1999

In this paper, we implement and construct a kernel on handhold systems. The goal of this project is to develop issues related to the development of small devices: embedded kernel, power management, user interface issues, networking, and the development of applications for small devices. We explain basic system configuration, kernel activity, device drivers and developing environment in this paper. We also explain detail scheduler activity.