• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제51권7호
• /
• pp.316-321
• /
• 2002

In this Paper, the channel characteristics of the medium voltage(22.9kV) power line to analysis the broadband power line communication in the frequency range up to 30MHz was measured. With the sideband electrical coupler in the operating frequency range from DC to 30MHz, we measured characteristic impedance, noise and attenuation of the medium voltage power line, and then characteristic impedance was measured at the state of unloaded medium voltage power line by Scattering parameter method of Vector Network Analyzer. As a measurement result, Channel impedance shows 100~380$\Omega$ at the less than 15MHz and 70~230$\Omega$ at the more than 15 MHz. Noise characteristics of power line shows -75dBm at 20MHz and Narrowband interference noise was from 3 MHz to 7MHz.

• 전기전자학회논문지
• /
• 제17권3호
• /
• pp.260-266
• /
• 2013

DRAM 에서 folded bit line 대비 open bit line은 데이터 read나 write 동작시 노이즈(noise)에 취약하다. 6F2(F: Feature Size) 구조의 open bit line에서 DRAM 집적도 증가에 따라 코어(core) 회로부 동작 조건은 노이즈로부터 더욱 악화된다. 본 논문에서는 비트라인(bit line) 간 데이터 패턴의 상호 간섭 영향을 분석하여, 기존의 연구에서는 다루지 않았던 open bit line 방식에서 데이터 패턴 상호 간섭의 취약성을 실험적 방법으로 확인하였으며, 68nm Tech. 1Gb DDR2에서 Advan Test장비를 사용하여 실험하였다. 또한 open bit line 설계 방식에서 노이즈 영향이 DRAM 동작 파라미터(parameter) 특성 열화로 나타나는데, 이를 개선 할 수 있는 방법을 센스앰프 전원분리 실험으로 고찰하였다. 센스앰프 전원분리시 0.2ns(1.3%)~1.9ns(12.7%) 이상 개선될 수 있음을 68nm Tech. 1Gb DDR2 modeling으로 시뮬레이션 하였다.

• 한국전자파학회지:전자파기술
• /
• 제2권1호
• /
• pp.55-62
• /
• 1991

본 논문에서는 전도성 잡음의 형태로 전파되는 건물내 전력선 상의 잡음 종류와 분포 특성을 살펴 보았으며, 세가지 방법으로 나누어 현장 시험을 수행하고 그 결과를 분석하였다. 측정 결과를 보면, 전 주파수 대에 걸쳐 존재하는 랜덤 잡음 외에도 60Hz 전원 주파수와 동기되어 나타나는 고주파 잡음 및 TV, 모터 등에 의한 임펄수 잡음 등이 건물내 전력선 전도 잡음의 주류를 이루고 있다.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2007년도 학술대회
• /
• pp.215-218
• /
• 2007

In this paper, we have analyzed the effects from the change of separation distance between grounding equipment at end of telecommunication line and the inducting facilities in power inducting situation. In the result of measurement, we can see that as the separation distance between grounding equipment ant end of telecommunication line and the inducting facility become longer, the induced noise level and PIF level is decreased. From the another experiment results about the effect of changing the impedance size in both ends of telecommunication line, however, we already knew that as the ground impedance at either end of the telecommunication line become grower, the noise level is increased, and as the ground impedance at either end of the telecommunication line become smaller, the noise level is decreased. Hence we can not define the relationship exactly between separation distance from inducting facility to inducted facility and the induced noise level because when the grounding equipment is moved, its impedance size is changed too. In conclusion, changing the separation distance between grounding equipment at end of telecommunication line and the inducting facilities have not influence on the induced noise level.

• International journal of advanced smart convergence
• /
• 제8권2호
• /
• pp.199-203
• /
• 2019

In this paper, we propose the efficient impulsive noise mitigation scheme for power line communication (PLC) systems in smart grid applications. The proposed scheme estimates the channel impulsive noise information of receiver by applying machine learning. Then, the estimated impulsive noise is updated in data base. In the modulator, the impulsive noise which reduces the PLC performance is effectively mitigated through proposed technique. As an impulsive noise model, Middleton Class A interference model was employed. The performance is evaluated in terms of bit error rate (BER). From the simulation results, it is confirmed that the proposed scheme has better BER performance compared to the conventional model. As a result, the proposed noise mitigation improves the signal quality of PLC systems by effectively removing the channel noise. The results of the paper can be applied to PLC systems for smart grid.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.58-58
• /
• 2002

Recently Many technologies of the P.L.N (Power Line Network) are introduced for an efficient communication. P.L.N transmits information using power line channel. A medical information transmission system is proposed in this paper for the effective transmission. The Power Line Networks have an advantage in low cost because it uses existent power line. It can be easily applied anywhere that a power line socket is available. But the power line channel is very noisy, because many electronic devices in generate electronic noise in modulated signals. This problem should be considered carefully in the design of medical information transmission system using P.L.N. The proposed system can be applied...I propose a telemedicine system using the power line network.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 A
• /
• pp.127-128
• /
• 2006

The noise is major obstacle element in power line communication. However, because power supply networks are not designed for communication, there are various noise sources. Accordingly, a study of characteristic and cause of noise generated in low voltage transformer is important for outdoor power line communication. In this paper, we measure low voltage transformer noise in 1-30MHz using spectrum analyzer. We analyze cause and pattern of noise considering partial discharge.

• Journal of Advanced Marine Engineering and Technology
• /
• 제18권2호
• /
• pp.75-82
• /
• 1994

The existence of peroodic impulse noises in distribution line carrier (DLC) communication system is known to be the most serious obstacle for improving DLC communication quality in reliability and capacity. From the spectral points, impulse noises can be divided into baseband type and modulation type the noise width of whichs are much different each other. With each nose type, this study presents the basic characteristics in relation to what they originate from and how their spectrum properties are revealed. The baseband type impulse noise is normally caused from thyristor circuit running with low switching speed and the modulation type noise from the circuit of switching power supply. The base wave of modulation noise is shown to be the pulsuatic charging current to primary condenser in switching power circuit. The study result indicates also that placing the DLC carrier frequency away the band predominated by modulated noise especially from RCC type switching power circuit is very important in DLC design.

• 대한전자공학회논문지SD
• /
• 제39권8호
• /
• pp.42-45
• /
• 2002

낮은 전력선 잡음과 피드쓰루 전류를 갖는 저전력 SDRAM 출력 버퍼가 소개된다. 다수의 I/O를 갖는 SDRAM 출력 버퍼에 있어서, 제안된 언더슈트 방지 회로를 통하여, 피드쓰루 전류의 감소뿐 아니라, 전력소모의 감소가 가능하다. 효율적인 피드백 방법을 사용한 풀다운 드라이버를 사용하여, 접지선 잡음을 감소시킬 수 있다. 기존의 회로에 비하여 접지선 잡음은 66.3%, 순간 전력소모는 27.5%, 평균 전력 소모는 11.4% 감소되었다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 전력전자학술대회 논문집
• /
• pp.685-688
• /
• 2002

This paper deals with new scheme of remote load control management system with communication from RCU to controller using power line Power line communication is useful for economical data link but various problems and limitations are caused in using power lines for communications channel. A power line is not so good in the commercial electrical power, and its load noise and high frequency noise are so much. To decrease these noise, we used the FSK(Frequency Shift Keying) modulation method. The experimental results show that the proposed system in this paper is compatible with the conventional system with low cost and the feasibility is very high for new or remodeling plant.