• 전력전자학회논문지
• /
• 제14권6호
• /
• pp.440-448
• /
• 2009

설비용 전원선 EMI 필터(Facility power-line EMI filter)는 컴퓨터 센터와 같이 전자기적인 노이즈에 민감한 장비를 가진 배전 설비로 유입되는 EMI를 차단하기 위해 사용된다. 따라서 전류용량이 크며 특정한 응용분야에서는 MIL-STD 220 기준으로 14kHz~10GHz의 광대역에서 최고 100dB 이상의 삽입 손실(Insertion loss)이 요구된다. 이러한 요구조건을 만족하기 위해서는 광대역의 주파수에서 커패시터, 인덕터 등의 특성 분석과 고차 LC 필터 (High order LC filter) 설계기술이 필요하다. 본 논문에서는 이러한 광대역 설비용 전원선 EMI 필터의 설계에 대하여 기술하였다. 먼저, EMI 필터 설계를 위한 필터의 특징과 구조, 필터의 설계 과정, 필터 설계 방법 등에 대한 연구를 수행하였다. 그리고 필터 구성의 기본 소자인 커패시터와 인덕터의 특성에 대해 분석하였다. 최종적으로 광대역 설비용 전원선 EMI 필터를 설계 및 제작하여 실험을 수행하였으며, 실험 결과의 비교 분석을 통해 연구 결과를 검증하였다.

• 한국인터넷방송통신학회논문지
• /
• 제14권5호
• /
• pp.111-115
• /
• 2014

전력선 통신은 전기를 사용할 수 있는 어느 곳에서든지 데이터 전송 네트워크를 구축하기 위해 사용할 수 있다. 이러한 종류의 통신 시스템은 스마트 그리드와 홈 네트워크를 포함한 다양한 적용 분야에서 네트워크 구축을 위한 기반으로 제공된다. 반면에 전력선 통신은 다양한 종류의 간섭과 잡음에 취약하다. 또한 네트워크에 연결된 전기적 부하의 양과 종류에 따라 전력선 통신 채널의 특성이 지속적으로 변화한다. 특히 일상생활에서 스마트 기기의 폭발적인 증가에 의한 직류전원 공급장치의 사용이 증가함에 따라 전력선 통신 채널의 간섭 영향이 증가한다. 본 논문에서는 실험을 통하여 직류전원 공급장치의 동작에 따른 전력선 통신 채널의 영향과 데이터 전송 성능을 분석한다.

• Journal of Power Electronics
• /
• 제16권1호
• /
• pp.362-373
• /
• 2016

The on-line measurement of high-power IGBT collector current is important for the hierarchical control and short-circuit and overcurrent protection of its driver and the sensorless control of the converter. The conventional on-line measurement methods for IGBT collector current are not suitable for engineering measurement due to their large-size, high-cost, low-efficiency sensors, current transformers or dividers, etc. Based on the gate driver, this paper has proposed a current measuring circuit for IGBT collector current. The circuit is used to conduct non-intervention on-line measurement of IGBT collector current by detecting the voltage drop of the IGBT power emitter and the auxiliary emitter terminals. A theoretical analysis verifies the feasibility of this circuit. The circuit adopts an operational amplifier for impedance isolation to prevent the measuring circuit from affecting the dynamic performance of the IGBT. Due to using the scheme for integration first and amplification afterwards, the difficult problem of achieving high accuracy in the transient-state and on-state measurement of the voltage between the terminals of IGBT power emitter and the auxiliary emitter (u_Ee) has been solved. This is impossible for a conventional detector. On this basis, the adoption of a two-stage operational amplifier can better meet the requirements of high bandwidth measurement under the conditions of a small signal with a large gain. Finally, various experiments have been carried out under the conditions of several typical loads (resistance-inductance load, resistance load and inductance load), different IGBT junction temperatures, soft short-circuits and hard short-circuits for the on-line measurement of IGBT collector current. This is aided by the capacitor voltage which is the integration result of the voltage uEe. The results show that the proposed method of measuring IGBT collector current is feasible and effective.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 A
• /
• pp.501-503
• /
• 2001

Electric power consumption is highly increasing as the social trend requiring comfortable life, the population in a big city and the industrial development. Therefore it has become to be very important to supply the stable high-quality power. As these trend, the underground power transmission facility is highly increasing in the center of a city. As the proportion to increase facility in tunnel, the fire prevention measures of the underground transmission line become very important.

• 전기전자학회논문지
• /
• 제17권3호
• /
• pp.260-266
• /
• 2013

DRAM 에서 folded bit line 대비 open bit line은 데이터 read나 write 동작시 노이즈(noise)에 취약하다. 6F2(F: Feature Size) 구조의 open bit line에서 DRAM 집적도 증가에 따라 코어(core) 회로부 동작 조건은 노이즈로부터 더욱 악화된다. 본 논문에서는 비트라인(bit line) 간 데이터 패턴의 상호 간섭 영향을 분석하여, 기존의 연구에서는 다루지 않았던 open bit line 방식에서 데이터 패턴 상호 간섭의 취약성을 실험적 방법으로 확인하였으며, 68nm Tech. 1Gb DDR2에서 Advan Test장비를 사용하여 실험하였다. 또한 open bit line 설계 방식에서 노이즈 영향이 DRAM 동작 파라미터(parameter) 특성 열화로 나타나는데, 이를 개선 할 수 있는 방법을 센스앰프 전원분리 실험으로 고찰하였다. 센스앰프 전원분리시 0.2ns(1.3%)~1.9ns(12.7%) 이상 개선될 수 있음을 68nm Tech. 1Gb DDR2 modeling으로 시뮬레이션 하였다.

• Journal of Power Electronics
• /
• 제12권5호
• /
• pp.787-799
• /
• 2012

Real and reactive power flows on a transmission line interact inherently. This situation degrades power flow controller performance when independent real and reactive power flow regulation is required. In this study, a quasi multi-pulse interline power flow controller (IPFC), consisting of eight six-pulse voltage source converters (VSC) switched at the fundamental frequency is proposed to control real and reactive power flows dynamically on a transmission line in response to a sequence of set-point changes formed by unit-step reference values. It is shown that the proposed hybrid fuzzy-PI commanded IPFC shows better decoupling performance than the parameter optimized PI controllers with analytically calculated feed-forward gains for decoupling. Comparative simulation studies are carried out on a 4-machine 4-bus test power system through a number of case studies. While only the fuzzy inference of the proposed control scheme has been modeled in MATLAB, the power system, converter power circuit, control and calculation blocks have been simulated in PSCAD/EMTDC by interfacing these two packages on-line.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(1)
• /
• pp.53-56
• /
• 2000

In this paper, the architecture for the residential gateway is designed for the traffic statistics of home environment. The suitability of 10 Mbps power line communication is investigated for the control and the video data distribution through simulation. The design issues are discussed for a residential gateway and the network design that is based on the power line communication is presented. Traffic models are established from the actual traffic traces. They are used for performance evaluation of residential networks.

• 산업기술연구
• /
• 제25권B호
• /
• pp.189-193
• /
• 2005

In this paper we proposed the remote control system for the door lock by the unified modem with the wireless and the power line modem. We developed the management system program between the door-lock system and the proposed unified modem. The infrared communication system was used between the Door-Lock system and the power line modem. With the unified developed modem and the Door-Lock system, it is possible to control remotely the developed system in the internet service area.

• 전기학회논문지P
• /
• 제55권3호
• /
• pp.123-127
• /
• 2006

In a heating control system, the indoor temperature controller transfers temperature signals inputted from the temperature sensor and the user to the valve controller. The valve controller receives these signals then the valve controller controls the valve driving motor on two position control and controls the indoor temperature. When setting up a new valve driving motor from a long distance it is necessary to set up a new valve controller. But occasionary, due to construction, It is impossible to wire between the existing valve controller and the new valve controller. In this situation, the new and existing valve controllers can communicate via power line communication. In this paper it is proposed heating control system controls on two position control via power line communication.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.841-845
• /
• 1991

There are Carrier Current Communication or Power line Carrier (PLC) Communication conducted data exchange using power line Which is installed existing indoor. Power line is possible to construct data link economically, on the other hand, have an inferior transmission environment such as irregular noise and severe level variation. The purpose of this paper is to present transmission possibility for PLC using spread spectrum technique. In the initial synchronization, established computer simulation for the S/N in relation to PN code generator. By using this result, construct the prototype SS system and then experiment the transmission characteristics.