• 수산해양교육연구
• /
• 제11권2호
• /
• pp.150-183
• /
• 1999

Korea-Japan Fisheries Agreement concluded in 1965 made a contribution to the stable development of fisheries relationship for both countries until the year of 1980. From the time on thereafter a series of respectable fishery disputes occurred throughout the period of fisheries self-regulation in accordance with alteration of home and abroad conditions. And both countries marched into a cooperation era by enforcement of the new fisheries agreement from the 23 January 1999, because the Fisheries Agreement system of 1965 had many limitations to settle the fundamental fisheries problems. In this paper, the author carried out the legal interpretation, arrangement of historical facts and evaluation of actual results of the Korea-Japan Fisheries Agreement of 1965. The key contents of the Fisheries Agreement were the establishment of 12-nautical mile exclusive fishery zone and the joint-control fishery zone under the principles of maintenance of MSY for fishery resources, freedom of high seas and mutual cooperation. The legal foundation of the conclusion of the Fisheries Agreement were the San Francisco Peace Treaty of 1952 and the four International Conventions on the Law of the Sea of 1958. During the 33 years, the fisheries power of Korea made a rapid stride, on the other hand that of Japan was almost stagnated. And in the meantime, there were very important development on the international law of the sea, for instant, the settlement of 12-nautical mile territorial sea regime and the establishment of 200-nautical mile exclusive economic zone regime. Annual meetings of the Joint Fisheries Committee were not successful to fill the role for conservation of fishery resources. The Fisheries Self-Regulation Agreement concluded in 1980 was also insufficient to accept the new international regime on the law of the sea, for that reason it was terminated on 23 January 1999. But it is true that the Fisheries Agreement of 1965 made a contribution to normalization of fisheries relationship between both countries and fisheries development of Korea.

• 한국응용곤충학회지
• /
• 제51권2호
• /
• pp.91-97
• /
• 2012

온주밀감에서 귤녹응애, Aculops pelekassi의 분산지수와 분포양상, 표본조사시 적정 표본수에 대하여 조사하였다. 귤녹응애는 집중분포를 하고 있었으며, 분산지수는 Taylor's power law가 Iwao's patchiness regression보다 더 잘 설명하고 있었다. Taylor's power law의 상수를 이용하여 고정 정확도 수준에서 열매 표면 $cm^2$당 누적충수에 따라 조사를 중지할 수 있는 표본조사법을 만들었다. 경제적인 표본조사를 위하여 Kono-sugino의 경험적 이항모델을 개발하였으며, 이항모델을 이용하면 귤녹응애가 $cm^2$당 12마리 이상 발생한 열매 비율을 이용하여 평균밀도를 추정할 수 있었다 : $ln(m)=4.61+1.23ln[-ln(1-p_{12})]$. 최적의 tally threshold를 결정하기 위하여 추정평균에 대한 분산을 계산한 결과 tally threshold가 12일 때 추정평균의 분산이 적었으며, 발생과율 0.1~0.5의 범위에서 분산의 변동이 거의 없어 다른 tally threshold에 비해 높은 정확도로 평균을 추정할 수 있었다. 적정 표본수를 결정하기 위하여 계층표본조사법을 이용하여 분석한 결과 고정 정확도 0.25수준에서 감귤원당 적정 조사 나무수는 13주였으며, 나무당 조사 열매수는 5개, 열매당 2지점에서 $cm^2$당 귤녹응애수 조사가 바람직하였다(총 130표본).

• 지역사회간호학회지
• /
• 제26권3호
• /
• pp.221-229
• /
• 2015

Purpose: The purpose of this study was to investigate factors influencing depression among mothers-in-law in multicultural families. Methods: For this study, 159 participants from multicultural families were recruited through administrative units of the B. & U. Metropolitan City and G. Province. Data related to acculturation stress, resilience, and depression were collected from April to August 2014 and analyzed through t-test, one-way ANOVA, Pearson correlation coefficients, and regression analysis with the SPSS/WIN 22.0 for Windows program. Results: The participants had a moderate level of acculturation stress ($2.43{\pm}0.75$: range 1~5) and resilience ($4.74{\pm}1.14$: range 1~7). About 58% of the participants had depression. The results of stepwise multiple regression analysis indicated that mothers-in-law's depression was affected by resilience (${\beta}=-1.17$, p<.001), acculturation stress (${\beta}=0.85$, p=.026), perceived economic level (${\beta}=-0.83$, p=.016), difficulty in physical activity (${\beta}=-0.62$, p=.027), relationship satisfaction (${\beta}=-0.51$, p=.035), and education level (${\beta}=-0.48$, p=.033). The explanatory power of these factors was 35%. Conclusion: The findings indicated the need to lower the level of depression by enhancing resilience and reducing acculturation stress among mothers-in-law in multicultural families. Future research to reduce depression among mothers-in-law in multicultural families should consider how to enhance resilience and reduce acculturation stress.

• Korea-Australia Rheology Journal
• /
• 제17권1호
• /
• pp.15-20
• /
• 2005

In this study, the relationship between morphology and viscosity of the main culture broth of Cephalosporium acremonium M25 was investigated in a 2.5 L bioreactor. The differentiation of C. acremonium M25 showed a complex pattern during the main culture. The morphological changes of C. acremonium M25 were related to the rheological properties of the culture broth and it was well agreed with the power law model. As a result of rheology study, it was found that rheological properties of the main culture broths of C. acremonium M25 in bioreactor were closely related to morphological changes. Also, fractal dimension fairly predicted morphological and rheological changes in the main culture broth.

• 한국자동차공학회논문집
• /
• 제15권6호
• /
• pp.38-43
• /
• 2007

In this paper, a study is described on finding a relationship between discomfort and body pressure distribution. In the first step, experiments were conducted to find correlation between pressure distribution and discomfort. The experiments of 12 people on 9 seats were performed. In the second step, parameters and correlation coefficients were determined between the measured body pressure distribution and median values of the subjective evaluations of 12 subjects using psychophysical power law.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.194-199
• /
• 2000

The creep rate is affected by the temperature and in fact. if the temperature above $T_M/2(T_M:melting\;point)$. The aim of the present investigation is to study the relationship of static creep and cyclic creep behavior of pure copper and the formulation of these phenomena with the special attention to the instantaneous strain. strain rate from time and number of cycles have the same inclination Steady state creep rate depend upon maximum stress and can be expressed as linear function according to Power law creep equations Creep rupture time has relation with creep rate. and it make a group represented as the same direct line regardless of max stress, stress ratio and the temperature. Initial strain effect on continuous creep deformation. and have guantitative relationship between elastic and Plastic strain. LMP have similar tendency than OSDP and MHP according to temperature

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권8호
• /
• pp.3630-3656
• /
• 2018

Degree distribution can provide basic information for structural characteristics and internal relationship in social network. It is a critical procedure for social network topology analysis. In this paper, based on the mean-field theory, we study a special type of social network with exponential distribution of time intervals. First of all, in order to improve the accuracy of analysis, we propose a spreading coefficient algorithm based on intimate relationship, which determines the number of the joined members through the intimacy among members. Then, simulation show that the degree distribution of follows the power-law distribution and has small-world characteristics. Finally, we compare the performance of our algorithm with the existing algorithms, and find that our algorithm improves the accuracy of degree distribution as well as reducing the time complexity significantly, which can complete 29.04% higher precision and 40.94% lower implementation time.

• 드라이브 ㆍ 컨트롤
• /
• 제14권4호
• /
• pp.23-28
• /
• 2017

Time-delay control with internal model (TDCIM) is the controller for robot manipulators that applies the time-delay estimation and the concept of internal model control (IMC). TDCIM is robust against unknown dynamics and non-linear friction like coulomb friction and static friction. It is simple and computationally efficient. This study presents the relationship between the discrete TDCIM and the discrete PID controller. The PID controller is the most popular control law in the real application. But often the PID controller can be difficult to achieve the desired level of control performance. The result in this study provides a good candidate solution to these situations.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제14권2호
• /
• pp.93-96
• /
• 2014

RFID (Radio Frequency IDentification) system is recognition technology which can maintain various object's information. Reliability of RFID tags is the most important factor in RFID system. In this paper, we proposed ALT (Accelerated Life Test) method for UHF RFID tags. Temperature and humidity were adopted as stress factors and the accelerated life tests were conducted in three different conditions. We performed failure analysis for identifying failure mechanism and statistical analysis of test data. In the statistical analysis, we employed Inverse Power law for relationship between tag's life and stress. Through the statistical analysis, we proposed acceleration factor for several levels of temperature-humidity. The reliability qualification test plans were also designed for the tag's target reliability.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.784-787
• /
• 2003

Electrorheological(ER) and magnetorheological(MR) fluid-based dampers are typically analyzed using Bingham-plastic shear model under quasi-steady fully developed flow conditions. A Herschel-Bulkley constitutive shear flow relationship is that the linear shear stress vs. strain rate behavior of Bingham model is replaced by a shear stress that is assumed to be proportional to a power law of shear rate. This power is called the flow behavior index. Depending on the value of the flow behavior index number, varying degrees of post-yield shear thickening or thinning behavior can be analyzed. But it is not practical to analyze the damping force in a flow mode damper using Herschel-Bulkley model because it is needed to solve a polynomial equation. A useful guide is suggested to analyze the damping force in a damper using the Herschel-Bulkley model.