• 제목/요약/키워드: Power Transmission Systems

검색결과 1,408건 처리시간 0.033초

TCSC의 $H_{\infty}$ 제어에 의한 대규모 전력계통의 지역간 저주파진동 억제 PartI : 설치지점 선정 (Damping Inter-area Low Frequency Oscillations in Large Power Systems with $H_{\infty}$ Control of TCSC PARTI : TCSC Siting)

  • 김용구;심관식;송성근;김영환;남해곤
    • 대한전기학회논문지:전력기술부문A
    • /
    • 제49권5호
    • /
    • pp.226-232
    • /
    • 2000
  • This paper presents application results of the augmented matrix eigen-sensitivity theories to TCSC siting problem for damping the inter-area low frequency oscillation in the large KEPCO system. First and second-order eigen-sensitivities of the inter-area low frequency oscillation in the large KEPCO system. First and second-order eigen-sensitivities of the inter-area mode are computed fro changes in susceptance of the transmission lines. The lines having high sensitivity are chosen as the initial candidates for installing TCSC. Then for each of the chosen candidates, Bodeplot of the transfer function with line susceptance as the input and the bus voltage at one side of the line as the output is computed. Using the Bode plots, the lines having any zeros near the inter-area mode are screened out since design of TCSC controller is very difficult in such a case. The $H_{\infty}$ TCSC controller installed at any finally chosen candidate is found to be effective in damping the inter-area oscillation, and the proposed TCSC siting algorithm is proved to be valid. Design of $H_{\infty}$ controller is described in Part IIof this paper.

  • PDF

기회주의적인 중계기 사용에 대한 협력 다이버시티의 성능 분석 (Performance Analysis of Cooperative Diversity on the Usage of Opportunistic Relay)

  • 김태욱;공형윤
    • 한국인터넷방송통신학회논문지
    • /
    • 제14권3호
    • /
    • pp.7-12
    • /
    • 2014
  • 협력통신을 실제 무선 통신 시스템에 적용하기 위해서는 정보 전달을 담당하는 중계기를 설치해야한다. 그러나 중계기 설치는 비용 및 전력 낭비의 문제점을 가지고 있다. 따라서, 본 논문에서는 일반적인 중계기의 사용을 재고하여, 효율적인 중계기 사용을 위해 중계기를 사용자 모바일 단말기로 정의하였다. 제안하는 프로토콜에 따라 중계기(사용자 단말기)의 상태에 대해 유휴, 무휴상태로 나누었으며, 수신단에 대해 기지국 모델, 사용자 단말기 모델을 적용하였다. 이 경우, 추가적인 비용 없이 실제 네트워크에 협력 통신을 적용할 수 있으며, 네트워크 용량 및 스펙트럼 효율을 높일 수 있다. 마지막으로, 제안한 프로토콜을 레일리 페이딩 환경에서 Monte-Carlo 시뮬레이션을 통해 전체적인 시스템 모델의 비트오류율(BER)을 분석한다.

WCDMA 시스템에서 극성 변조를 이용한 빠른 셀 탐색 알고리즘 (Fast Cell Search Algorithm using Polarization Code Modulation(PCM) in WCDMA Systems)

  • 배성오;임재성
    • 한국통신학회논문지
    • /
    • 제27권8B호
    • /
    • pp.809-818
    • /
    • 2002
  • 본 논문에서는 3GPP 표준인 WCDMA 시스템에 호환성을 유지하면서 적용될 수 있는 새로운 셀 탐색 알고리즘을 제안한다. 기존 WCDMA 시스템에서는 2개의 동기 채널(P-SCH 및 S-SCH)을 이용하여 셀 탐색을 수행하는데 반해 제안하는 셀 탐색 알고리즘은 하나의 동기 채널만을 이용하여 슬롯 동기와 프레임 동기 그리고 코드 그룹 아이디를 획득할 수 있다. 이를 위하여 제안하는 알고리즘에서는 기존 WCDMA의 P-SCH에 극성 코드를 이용한 극성 변조를 수행함으로써 스크램블링 코드의 그룹핑 정보를 전송한다. 제안하는 셀 탐색 알고리즘은 기존 WCDMA 셀 탐색 알고리즘에 비해 하나의 동기 채널만을 이용하기 때문에 기지국에서 송신 신호의 이득을 얻을 수 있으며 동시에 수신기의 복잡도를 줄일 수 있는 특징을 갖는다. 제안하는 알고리즘은 특히 SNR 좋지 못한 채널 환경에서 기존 셀 탐색 알고리즘에 비하여 셀 탐색 시간면에서 우수한 성능을 보임을 시뮬레이션을 통하여 검증하였다.

Energy-Aware Preferential Attachment Model for Wireless Sensor Networks with Improved Survivability

  • Ma, Rufei;Liu, Erwu;Wang, Rui;Zhang, Zhengqing;Li, Kezhi;Liu, Chi;Wang, Ping;Zhou, Tao
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제10권7호
    • /
    • pp.3066-3079
    • /
    • 2016
  • Recent years have witnessed a dramatic increase in topology research of wireless sensor networks (WSNs) where both energy consumption and survivability need careful consideration. To balance energy consumption and ensure survivability against both random failures and deliberate attacks, we resort to complex network theory and propose an energy-aware preferential attachment (EPA) model to generate a robust topology for WSNs. In the proposed model, by taking the transmission range and energy consumption of the sensor nodes into account, we combine the characters of Erdős -Rényi (ER) model and Barabasi-Albert (BA) model in this new model and introduce tunable coefficients for balancing connectivity, energy consumption, and survivability. The correctness of our theoretic analysis is verified by simulation results. We find that the topology of WSNs built by EPA model is asymptotically power-law and can have different characters in connectivity, energy consumption, and survivability by using different coefficients. This model can significantly improve energy efficiency as well as enhance network survivability by changing coefficients according to the requirement of the real environment where WSNs deployed and therefore lead to a crucial improvement of network performance.

곡률 커플링 접촉각에 따른 접촉 강성 및 굽힘 강성해석 (Analysis of Contact Stiffness and Bending Stiffness according to Contact Angle of Curvic Coupling)

  • 유용훈;조용주;이동현;김영철
    • Tribology and Lubricants
    • /
    • 제34권1호
    • /
    • pp.23-32
    • /
    • 2018
  • Coupling is a mechanical component that transmits rotational force by connecting two shafts. Curvic coupling is widely used in high-performance systems because of its excellent power transmission efficiency and easy machining. However, coupling applications change dynamic behavior by reducing the stiffness of an entire system. Contact surface stiffness is an important parameter that determines the dynamic behavior of a system. In addition, the roughness profile of a contact surface is the most important parameter for obtaining contact stiffness. In this study, we theoretically establish the process of contact and bending stiffness analysis by considering the rough surface contact at Curvic coupling. Surface roughness parameters are obtained from Nayak's random process, and the normal contact stiffness of a contact surface is calculated using the Greenwood and Williamson model in the elastic region and the Jackson and Green model in the elastic-plastic region. The shape of the Curvic coupling contact surface is obtained by modeling a machined shape through an actual machining tool. Based on this modeling, we find the maximum number of gear teeth that can be machined according to the contact angle. Curvic coupling stiffness is calculated by considering the contact angle, and the calculation process is divided into stick and slip conditions. Based on this process, we investigate the stiffness characteristics according to the contact angle.

적응형 송신 빔 성형을 적용한 CDMA 시스템의 귀환 채널 지연에 따른 성능 (Sensitivity of Feedback Channel Delay on Transmit Adaptive Array)

  • 안철용;한진규;김동구
    • 한국통신학회논문지
    • /
    • 제27권6B호
    • /
    • pp.579-585
    • /
    • 2002
  • 적응형 송신 빔 성형 방식에서 순방향 채널 정보의 전달은 시스템 성능을 결정하는 중요한 요소이다. 다양한 귀환 채널 정보의 오류에 따른 시스템의 성능 연구는 귀환 채널 설계 및 귀환 정보의 정확한 전달을 위한 전송 기술 연구를 위해 요구된다. 이 논문에서는 이동국의 수신 신호 대 간섭과 잡음비 (SINR)를 최대화하는 적응형 빔성형 방식을 적용한 CDMA 시스템을 구성하구 송신 안테나 수 및 귀환 지연에 따른 시스템 성능을 연구한다. 특히 채널의 공간 상관 및 시간 상관 특성에 따라 귀환 지연이 여러 개의 송신 안테나를 갖는 적응형 송신 빔 성형시스템의 성능에 미치는 영향을 주파수 비선택적 페이딩 채널 및 다중경로 페이딩 채널에서 모의 실험을 통해 연구한다. 모의 실험 결과는 시스템 성능이 각 안테나 신호가 겪는 페이딩 채널의 통계적 특성이 공간적으로 서로 독립적일 때 안테나 수가 증가할수록 귀환 지연에 더욱 크게 영향을 받는 것을 보여준다. 각 안테나 신호가 겪는 페이딩 채널의 공간 상관 특성이 매우 높을 경우, 다중 경로 페이딩 환경에서는 귀환 지연에 의한 성능 저하는 약 0.1dB 이하로 매우 적음을 보여준다.

5세대 이동통신을 위한 후보 변조기술들의 시간과 주파수 자원 비교 분석 (Comparison Analysis of Time and Frequency Resource of Candidate Waveforms for 5G Mobile Communications)

  • 안창영;유흥균
    • 한국전자파학회논문지
    • /
    • 제27권11호
    • /
    • pp.987-995
    • /
    • 2016
  • 5세대 이동통신을 위한 후보변조기술에서 중요한 평가 요인 중 하나는 OOB(Out of Band) 전력 저감을 통한 주파수 효율 향상 특성이다. 본 논문에서는 5세대 이동통신을 위한 후보변조기술로 주목받고 있는 UFMC(Universal Filtered Multi-Carrier), FBMC(Filter Bank Multi-Carrier), W-OFDM(Weighted Orthogonal Frequency Division Multiplexing) 시스템에 대한 시간 자원 할당에 대한 주파수 자원의 효율을 평가하고 비교 분석한다. 시뮬레이션을 통해 시간 자원 할당에 대한 스펙트럼 효율 향상 특성을 확인하였으며, 추가적으로 확보할 수 있는 주파수 자원을 확인하였다. 본 논문에서는 동일한 데이터 비트를 전송하며, 4개의 심볼을 전송하는 조건에서, 시스템이 선형일 때, 각 시스템은 모두 유사한 시간-주파수 자원 활용 효율을 보이나, 비선형 조건에서는 FBMC의 시간-주파수 자원 활용 효율이 가장 크게 저하되는 것을 확인하였다.

생체 의학 빅 데이터 분석을 위한 생체 정보 수집 시스템 (A biometric information collecting system for biomedical big data analysis)

  • 임담섭;홍선학;구민오;민덕기
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2013년도 추계학술대회
    • /
    • pp.513-516
    • /
    • 2013
  • 본 논문에서는 지능화된 의료 정보 시스템 구축 및 의료 빅 데이터 처리를 위한 생체 정보의 수집, 전송, 관리와 같은 일련의 체계화된 의료 정보 시스템의 구현 및 설계를 제공한다. 본 논문에서 제시하는 의료 정보 시스템은 소형화 및 저 전력화된 생체 정보 수집 센서와 이를 단계적으로 수집하여 중앙 의료 정보 시스템으로 전송하는 데이터 정보 전송 장치 및 저장 장치로 구성되어 있다. 기존 의료 정보 구축 환경은 간호사나 의사의 수기 작성에 의한 수집 및 비 자동화된 방법에 의한 구축으로 관리되어짐에 따라 장기적 관점에서의 의료 품질 향상 및 연구가 불가능하였다. 하지만, 본 논문에서 제시하는 의료 정보 수집 시스템을 통하여 인적 오류 극복 및 정보 수집 범위의 극대화를 추구할 수 있다. 더 나아가, 실시간 의료 정보 빅 데이터 분석 시스템과의 결합을 통해 환자 상태 분석 및 처방과 의료 품질 개선 전략 수립을 가능케 하며, 의료 정보 네트워크 구축을 통해 대형화 되어가는 의료 시장에 빠르게 대처할 수 있다.

  • PDF

OFDMA 시스템을 위한 다중 셀 전송 다양성 기법 (Multi-Cell Transmit Diversity Scheme for OFDMA Systems)

  • 서방원
    • 한국통신학회논문지
    • /
    • 제37A권9호
    • /
    • pp.721-727
    • /
    • 2012
  • 기존의 다중 셀 전송 다양성 기법의 경우, 단말기는 채널 상태가 가장 좋은 송신 안테나에 대한 인덱스를 기지국으로 피드백하고, 각 기지국은 그 정보에 의해 한 개의 송신 안테나만을 이용하여 다중 셀 전송 다양성 기법을 적용한다. 그러나, 채널이 빠르게 변하는 경우에는 단말기의 피드백 시점과 기지국의 데이터 스케줄링 시점의 채널이 매우 달라지게 된다. 또한, 기지국에 장착된 송신 안테나들은 보통 개별적인 전력 증폭기를 가지고 있기 때문에, 한 개의 송신 안테나만을 사용할 경우 가용 전력의 일부만을 사용하게 되어서 전체 성능이 감소하게 된다. 따라서, 본 논문에서는 기지국이 단말기의 피드백 정보에 의존하지 않고 모든 송신 안테나들을 동시에 사용하는 프리코딩 벡터 기반의 다중 셀 전송 다양성 기법을 제안한다. 제안하는 방법에서는 이웃한 부반송파들 간에 서로 다른 프리코딩 벡터를 적용함으로써, 수신 신호가 넓은 대역에 걸쳐서 큰 채널 감쇄 현상을 겪는 것을 회피하게 된다. 모의 실험을 통하여, 단말기의 이동 속도가 빠른 경우에는 제안하는 방법이 기존 방법보다 더 우수한 성능을 나타낸다는 것을 보인다.

최상부분집합이 고려된 능형회귀를 적용한 현장관입지수에 대한 통계적 예측기법 개발 및 적용 (Development and implementation of statistical prediction procedure for field penetration index using ridge regression with best subset selection)

  • 이항로;송기일;김경열
    • 한국터널지하공간학회 논문집
    • /
    • 제19권6호
    • /
    • pp.857-870
    • /
    • 2017
  • 사회기반시설의 지중화로 인하여 쉴드 TBM 적용이 점차 확대되고 있는 추세다. 합리적인 공기기간 및 공사비 산정을 위해 쉴드 TBM의 실굴진율을 정확하게 예측하는 것은 매우 중요한 사안이라 할 수 있다. 이러한 이유로 국내에서는 지반의 물성을 합리적으로 반영한 쉴드 TBM의 실굴진율 예측모델이 필요한 상황이다. 본 연구는 쉴드 TBM의 순굴진율 산정을 위해 현장 데이터베이스를 기반으로 현장관입지수의 통계적 예측절차를 모듈화 하였다. 출력인자로 현장관입지수를 선정하였고, 비정상치 제거 및 전처리 그리고 최상 부분집합선택이 고려된 능형회귀를 적용한 예측시스템을 모듈에 포함하였다. 또한 현장 굴진 데이터를 활용하여 예측모델의 적용성을 확인하였다.