• 한국안전학회지
• /
• 제13권4호
• /
• pp.162-171
• /
• 1998

This paper presents the harmonics obstacle analysis and countermeasure of electrical consumption a place. Harmonics that can be cosidered as a environmental pollution of the power systems become the cause of the accidents and damages. The responsibility of eliminating the harmonics firstly lies on the generating side. But the original characteristics of the system sush as the harmonic transfer characteristics and the impedance of the system affect each other in the process of the generation and transmission of the harmonic. Therefore it is very difficult to specify clearly the harmonic controlling responsibility, because electric machinery generating harmonics are various in the industrial fields. The output of a inverter has a high harmonic content. There are several ways of minimizing the output harmonic content. One way is to use pulse width modulation techniques within inverter. An alternative method is to combine a number of square-wave inverters. In this research, we measure the harmonic of the countermeasure of electrical consumption a place. The paper present the problem of new harmonic elimination method of PWM inverter fed induction motor system using W-FT series. In the future, the proposed PWM pattern by W-FT series is effective not only to the induction motor but also to the electromagnetic machine such as voltage reglator, UPS.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 A
• /
• pp.266-267
• /
• 2006

A coupling capacitor voltage transformer (CCVT) is used in extra high voltage and ultra high voltage transmission systems to obtain the standard low voltage signal for protection and measurement. To obtain the high accuracy at the power system frequency, a tuning reactor is connected between a capacitor and a voltage transformer (VT). Thus, no distortion of the secondary voltage is generated when no fault occurs. However, when a fault occurs, the secondary voltage of the CCVT has some errors due to the transient components resulting from the fault. This paper proposes an algorithm for compensating the secondary voltage of the CCVT in the time domain. With the values of the secondary voltage of the CCVT, the secondary and the primary currents are obtained; then the voltage across the capacitor and the tuning reactoris calculated and then added to the measured secondary voltage. The proposed algorithm includes the effect of the non-linear characteristic of the VT and the influence of the ferro-resonance suppression circuit. Test results indicate that the algorithm can successfully compensate the distorted secondary voltage of the CCVT irrespective of the fault distance, the fault inception angle and the fault impedance.

• Journal of information and communication convergence engineering
• /
• 제5권4호
• /
• pp.389-393
• /
• 2007

The distribution of donated blood for medical purpose is an area that presents many challenges. In order to establish a comprehensive solution, the current patterns of distribution must be reviewed and problems related to it need to be clearly understood. This paper introduces 'Radio Frequency Identification (RFID) System', as a potential solution to some of the problems which arise in the process of blood supply distribution, and a way to systematically manage the blood supply. For the various possible RFID systems, the reader and tag must be suitable for the purpose of blood distribution. A database has been designed that can recognize tags and objects in a ubiquitous RFID blood distribution system. In this paper, we design the real-time software to control the RFID reader system and transponder, using the EEPROM memory by RFID. The experimental results confirm that the transmission rate of 3.9kbps for RF is 125 KHz. The electric power usage of transponder chip is $100{\mu}W$, with the recognition distance is about 7cm range.

• 전기전자학회논문지
• /
• 제2권1호
• /
• pp.85-95
• /
• 1998

DS/CDMA 시스템 역방향 링크의 파일롯 신호방식으로 파일롯 채널방식과 파일롯 심볼방식이 있다. 파일롯 채널방식은 데이터 채널과 병렬로 파일롯 신호를 전송하며, 파일롯 심볼방식은 데이터 채널과 직렬로 파일롯 신호를 전송한다. 본 연구에서는 이 두 방식을 해석적으로 비교하고 분석하였다. 두 방식을 분석한 결과 이들 두 방식의 성능은 부가잡음, 패이딩정도, 심볼 삽입주기 및 파일롯 채널의 전력에 영향을 받음을 할 수 있었다. 분석결과 파일롯 심볼방식이 파이롯 채널방식보다 우수함을 확인하였다.

• Smart Structures and Systems
• /
• 제8권5호
• /
• pp.471-486
• /
• 2011

Various types of strain sensors have been developed and widely used in the field for monitoring the mechanical deformation of structures. However, conventional strain sensors are not suited for measuring large strains associated with impact damage and local crack propagation. In addition, strain sensors are resistive-type transducers, which mean that the sensors require an external electrical or power source. In this study, a gold nanoparticle (GNP)-based polymer composite is proposed for large strain sensing. Fabrication of the composites relies on a novel and simple in situ GNP reduction technique that is performed directly within the elastomeric poly(dimethyl siloxane) (PDMS) matrix. First, the reducing and stabilizing capacities of PDMS constituents and mixtures are evaluated via visual observation, ultraviolet-visible (UV-Vis) spectroscopy, and transmission electron microscopy. The large strain sensing capacity of the GNP-PDMS thin film is then validated by correlating changes in thin film optical properties (e.g., maximum UV-Vis light absorption) with applied tensile strains. Also, the composite's strain sensing performance (e.g., sensitivity and sensing range) is also characterized with respect to gold chloride concentrations within the PDMS mixture.

• 대한임베디드공학회논문지
• /
• 제2권2호
• /
• pp.82-94
• /
• 2007

Wireless sensor networking technology is one of the basic infrastructures for ubiquitous environment. It enables us to gather various sensory data such as temperature, humidity, gas leakage, and speed from the remote sensor devices. To support these networking functions, IEEE WPAN working group makes standards for PHY and MAC, while ZigBee Alliance defines the standards for the network, security, and applications. The low-rate WPAN was emerged to have the characteristics of network resilience, low cost, and low power consumption. It has a broad range of applications including, but not limit to industrial control and monitoring, home automation, disaster forecast and monitoring, health care. In order to provide more intelligent and robust services, users want voice-based solutions to accommodate to low-rate WPAN. In this paper, we have evaluated voice quality of an IEEE 802.15.4 standard compliant voice node. Specifically, it includes the design of a voice node and experiments based on the prediction of voice quality using the E-model suggested by ITU-T G.107, and the network communication mechanisms considering beacon-enabled and nonbeacon-enabled networks for real-time voice communications.

• 전기전자학회논문지
• /
• 제15권3호
• /
• pp.235-240
• /
• 2011

지상파 DTV 표준인 DVB-T에 채택된 분산 파일럿은 블록 형태와 빗 형태의 파일럿 배치의 장점을 모두 가지며 전송 효율을 증가시킨다. 데이터 부반송파에 대한 채널 추정을 위해 파일럿 부반송파를 이용한 시간 및 주파수 영역 추정이 필요하다. MSE (mean square error) 관점에서 최적인 2D Wiener 추정기는 너무 복잡하여 실현성이 떨어진다. 본 논문에서는 가산 백색 가우스 잡음의 전력을 추정하여 이를 채널 추정치에서 제거하는 새로운 채널 추정 방식을 제안한다. 또한 모의 실험을 통해 제안된 방식이 페이딩 채널에서 2차원 선형 보간 방식보다 채널 추정 성능이 우수함을 보인다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.314-318
• /
• 2000

For one-dimensional structures, a vibration response consists of direct and reflected waves from boundaries. Based on this concept of separable wave components, a modified travelling wave method (MTWM) is proposed in this paper: while all allowable waves are assumed and the boundary conditions are applied on by the conventional travealling wave method (TWM), in the proposed MTWM direct and reflected waves are assumed within the beam element, and the governing relations between direct and reflected waves are described in terms of the reflection or transmission coefficients. It is shown that the vibration response with considerable accuracy can be obtained compared to TWM for single and coupled beams. It is also shown that the band analysis to obtain quadratic response, or power flow response can be carried out by a slight change of the governing equations for one-dimensional structural systems. It is thought that the suggested MTWM can be used as a unified approach for predicting linear spectral response and/or quadratic band response involved in the one-dimensional structural vibration.

• Journal of Electrical Engineering and Technology
• /
• 제11권3호
• /
• pp.543-550
• /
• 2016

The Active Superconducting Current Controller (ASCC) is a new type of Superconducting Fault Current Limiters (SFCL) which can limit the fault current in different modes. It also has the particular abilities of compensating active and reactive powers for electrical networks. In this paper, it is confirmed that the performance of ASCC in different operating modes introduces a limiting impedance in series with the network which can even degrade the transient stability and the operation of the Over-Current Relays (OCR) employed in a power system. In addition, the model of a three-phase ASCC is simulated, and the effect of descriptive modes on the current limiting level is investigated. For the transient stability analysis, a single machine-infinite bus system is tested, and the effect of operation modes is studied based on an equal area criterion obtaining the critical time and the critical angle. Modifying the setting parameters of OCR such as time dial and pick-up current, the protective coordination is also studied in different operating modes.

• 한국멀티미디어학회논문지
• /
• 제3권6호
• /
• pp.625-632
• /
• 2000

차세대 대용량 멀티미디어 무선통신시스템의 실현 및 주파수의 효율적 이용을 위해 불가결한 멀티 마이크로 셀 환경 하에서의 효율적인 시스템 구성을 위해서는 정보의 종류 및 트래픽의 시간적인 변동에 대해서 유연한 액세스 제어가 필요하다. 본 논문에서는 높은 시스템 용량을 실현하기 위해, 송신 단말의 평균 CNR(반송파 전력대 잡음 전력비)에 대응하여 변조 파라미터를 동적으로 설정하는 저속적응변조방식과 트래픽 상황에 대응하여 TDMA 데이터 슬롯 수를 가변으로 하는 멀티 슬롯 할당 방식을 조합시켰다. 적응 멀티 슬롯 할당 방식을 제안하고, 제안방식의 평균 메시지 지연 특성을 시뮬레이션에 의해 평가한다.