• 한국생산제조학회지
• /
• 제23권5호
• /
• pp.443-449
• /
• 2014

This study aims to develop a Flywheel Energy Storage System (FESS) that uses wind power produced when an urban train is in motion, by utilizing a mounted turbine. This system was designed to generate and store electric power from wind power of a travelling urban train. The flywheel was designed to continue rotation using a one-way clutch bearing installed in the turbine shaft pulley, even in cases where the urban train decelerates or stops. This FESS can generate an additional 44% of electric power in comparison to a system not equipped with a flywheel. The generated power and operational features of the FESS were evaluated and verified through a wind tunnel test. The results show that the electric power stored in the FESS could supply auxiliary power for urban train components or service equipment, such as charging mobiles, Wi-Fi modules, and electric lights.

• 대한기계학회논문집A
• /
• 제26권8호
• /
• pp.1585-1590
• /
• 2002

This paper reports on the balance weight effect on the lubrication and friction characteristics of crankshaft system. To determine the main bearing loads, the crankshaft was treated as statically determinate system. Four and eight-balance weight crankshafts were considered, and minimum oil film thickness and friction loss were calculated. The main bearing loads were increased in the four-balance shaft due to the increasing of unbalanced rotating mass at No. 1 and 3 main bearing sides. The minimum oil film thickness of four-balance shaft became thinner than eight-balance, and friction loss was increased.

• 대한기계학회논문집 C: 기술과 교육
• /
• 제5권2호
• /
• pp.115-126
• /
• 2017

본 논문은 특수 차량용 동력 전달계 부품인 구동축의 가속 수명 시험을 수행하는 것이다. 동력 전달계 부품의 수명 평가를 위하여 사용환경의 주행 부하 스펙트럼의 데이터가 필요하나, 특수 차량의 경우 부하 스펙트럼을 구할 수 없는 경우가 대부분이다. 따라서, 본 논문에서는 차량 데이터와 특수 주행로 조건에 기반하여 주행 부하 로드 스펙트럼을 모델링하고 시뮬레이션 하였다. 가속 수명 시험에는 역승 모델을 적용하였고, 마이너 법칙을 사용하여 등가 토크를 구하였으며, 구동축 가속 수명 시험을 위하여 교정 가속법을 사용하였다. 피로시험은 세 수준의 스트레스로 수행하였으며, 사용자 스트레스 수준의 수명은 외삽법을 사용하여 예측 하였고, 실제 시험 결과와 부하 스펙트럼 데이터와의 비교로 수명을 검증하였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 The 8th Asian Symposium on Precision Forging ASPF
• /
• pp.80-85
• /
• 2003

This research represents enhancement of forgeability of SNCM522H steel. Output Shaft (OP Shaft) has been used as a subject for the study. OP Shaft is used as component of power train for automobiles. To develop I pass cold forging process instead of existing 2 pass process for OP Shaft, studies in terms of process design and heat treatment were performed. To verify the new process, CAE simulations were performed. And hardness test, microstructural analysis and tensile tests after heat treatment were carried out to evaluate the validity of proposed heat treatment cycle. The 2 pass forging process could be reduced as 1 pass process through improvement of process and heat treatment cycle.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2002년도 춘계학술대회 논문집
• /
• pp.141-144
• /
• 2002

This study presents the enhancement of forgeability of SNCM522H materials. Target parts are output shaft(OP shaft) used as components of power train for automobiles. To carry out cold forging process of OP shaft by 1 pass instead of existing 2 pass process, studies in terms of process design and heat treatment were performed. To introduce the new process, Finite element Method are accomplished, and to verify the validity of proposed heat treatment cycle, several experiments(Hardness test, Observation of optical microstructures, tensile test) are carried out.

• 소성∙가공
• /
• 제12권5호
• /
• pp.473-478
• /
• 2003

This study presents the enhancement of forgeability of SNCM522H materials. Target parts are output shaft(OP shaft) used as components of power train for automobiles. To carry out cold forging process of OP shaft by 1 pass instead of existing 2 pass process, studies in terms of process design and heat treatment were performed. To introduce the new process, the finite element method was accomplished, and to assess the validity of proposed heat treatment cycle, several experiments(hardness test, observation of optical microstructures, tensile test) were carried out. The 2Pass forging process could be reduced as lPass process through improvement of process and heat treatment technology and that would give cost reduction.

• 한국정밀공학회지
• /
• 제25권11호
• /
• pp.73-82
• /
• 2008

A dynamic model of reducer for generating facility of electric pourer having bevel gear pair and planetary gear train is developed by lumped method. The model accounts for the shaft and bearing flexibilities, gyroscopic effects and the force couplings among the transverse and torsion motions due to gearing. Vibration/noise analysis as well as strength of bevel gear pair and planetary gear train are considered. Exciting forces of high reducer for generating facility of electric power areconsidered as the mass unbalance of the rotors, misalignment and a function of gear transmission error. A Campbell diagram, in which the excitation sources caused by the mass unbalance of the rotors, misalignment and the transmitted errors of the gearing are considered, shows that, at the operating speed, there are not critical speed.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권3호
• /
• pp.253-261
• /
• 2014

본 연구에서는 스퍼 유성기어시스템 2단, 헬리컬기어 시스템 1단으로 구성되어 있고, 메인 축과 증속기가 플랜지 결합되어 있는 동력분기식 2.5MW 풍력발전기에 대해 진동해석을 수행하였다. 유성기어시스템, 헬리컬기어시스템, 메인 축 등은 MASTA 상용프로그램으로 모델링하고, 기어박스 케이스, 토크암, 유성캐리어, 플랜지 등은 유한요소법으로 모델링하였으며, 부분구조합성법으로 조합하여 진동해석을 수행하였다. 2.5MW 동력분기식 풍력발전기 기어트레인의 고유진동 특성 해석을 수행하였고, 블레이드 풍하중에 의한 가진, 질량불평형, 축 어긋남 등에 발생하는 가진원에 대해 위험속도 분석을 하였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 추계학술대회논문집
• /
• pp.260-263
• /
• 2004

Since Outerrace is one of the components of driving shaft for power train of automobile and transmits high torque, high strength and high toughness are necessary so forging process is adopted to manufacture such parts. Therefore, in order to improve strength and toughness, heat treatment is accomplished after plastic deformation(forging). Because Each component of driving shaft is mounted to automobile after a series of forging, machining and heat treatment, in order to evaluate mechanical properties of such components in use, plastic deformation and heat treatment must be considered. So, in this paper, tensile tests are performed with tensile specimens which have passed through a series of upsetting, machining and heat treatment to evaluate mechanical properties of such components.

• 한국유체기계학회 논문집
• /
• 제15권2호
• /
• pp.36-40
• /
• 2012

Pitch control of wind turbine is activated above rated wind speed for the purpose of rated power regulation. When we design pitch controller, its gain-scheduling is essential due to nonlinear characteristics of aerodynamic torque. In this study, 2-mass model including a vibration mode of drive-train for a 2 MW wind turbine is considered and pitch control with gain-scheduling using a linearization analysis of the nonlinear aerodynamic torque is applied. Some simulation results for the pitch gain-scheduling under step wind speed are presented and investigated. It is shown that gain-scheduling in pitch control is important especially in the region of high wind speeds when there exists a vibration mode of drive-train.