Energy harvesting from piezoelectric strips attached to systems under random vibrations
-
- Smart Structures and Systems
- /
- 제24권3호
- /
- pp.333-343
- /
- 2019
The possibility of adopting vibration-powered wireless nodes has been largely investigated in the last years. Among the available technologies based on the piezoelectric effect, the most common ones consist of a vibrating beam covered by electroactive layers. Another energy harvesting strategy is based on the use of piezoelectric strips attached to a hosting structure subjected to dynamic loads. The hosting structure, for example, can be the system to be equipped with wireless nodes. Such strategy has received few attentions so far and no analytical studies have been presented yet. Hence, the original contribution of the present paper is concerned with the development of analytical solutions for the electrodynamic analysis and design of piezoelectric polymeric strips attached to relatively large linear elastic structural systems subjected to random vibrations at the base. Specifically, it is assumed that the dynamics of the hosting structure is dominated by the fundamental vibration mode only, and thus it is reduced to a linear elastic single-degree-of-freedom system. On the other hand, the random excitation at the base of the hosting structure is simulated by filtering a white Gaussian noise through a linear second-order filter. The electromechanical force exerted by the polymeric strip is negligible compared with other forces generated by the large hosting structure to which it is attached. By assuming a simplified electrical interface, useful new exact analytical expressions are derived to assess the generated electric power and the integrity of the harvester as well as to facilitate its optimum design.
플래시 스토리지 장치의 신뢰성을 향상시키기 위해서 사용되는 기술 중의 하나가 RAID-5 기술이 있다. RAID-5에는 고유한 패리티 업데이트 오버헤드가 있는데, 특히 부분 스트라이프 쓰기에 대한 패리티 오버헤드는 플래시 기반 RAID-5 기술의 중요한 문제 중 하나이다. 본 논문에서는 RAID-5에서 발생하는 런타임 부분 패리티 오버헤드를 제거하기 위해 효율적인 패리티 로그 아키텍처를 설계하였다. 런타임 동안, 전체 스트라이프 쓰기가 완료될 때까지 부분 패리티가 버퍼 메모리에 유지되며, 스트라이프 쓰기가 완료될 때 패리티는 전체 스트라이프 쓰기로 기록된다. 페리티 로그는 전체 스트라이프 그룹이 데이터 쓰기에 사용될 때까지 메모리에서 유지된다. 이 패리티 로그를 사용하면 갑작스러운 전력 손실로부터 부분 패리티를 복구할 수 있으므로 데이터 손실에도 문제가 발생하지 않는다. 패리티 로그 방법은 작은 패리티 로그 양으로 부분 패리티 쓰기 오버헤드를 제거할 수 있으므로, 같은 신뢰성 수준에서 쓰기 오버헤드를 줄일 수 있다.
Statement of problem. The effect of gold electroforming on gold alloy was not studied. Purpose. This in vitro study investigate the effect of gold electroforming on gold-silver-palladium alloy. Material and methods. Three pieces of gold strips had undergone the electroforming procedures on one side and then half of the side again electroformed. The set mode for this study was program 1 (
긴 이야기구조의 기승전결인 네 국면의 플롯은 패턴화 되어 도식화된 경향이 있다. 인물의 행동에는 인류의 시작과 궤를 같이 하게 되는데 장편연재만화 플롯은 기본적으로 4국면이지만, 단순 배열이 아닌 인류의 추진력이나 행동과 느낌의 패턴을 정리하여 개발한 복잡 배열이다. 이 연구는 만화전문대학생 설문과 답변으로 결과지를 얻은 후, 통합적으로 추출된 장편연재만화작품의 설문 자료를 통하여 장편연재만화 아리스토텔레스 이론인 플롯의 국면, 네 단계와 캐롤 피어슨의 인물원형이론을 통한 4개의 인물의 유형화, 조셉 캠벨의 영웅의 여정이론을 네 단계로 유형화한다. 복잡한 장편연재만화의 이야기 구조가 가진 요소 중 하나인, 인물이 겪는 삶의 과정을 제시하여 간략성과 체계적 기술을 통해 유형화하는 이 연구는 결국 만화작가가 장편연재만화의 복잡하고 긴 이야기의 구조에서 은유하는 것은 무엇인가를 밝히고자함이다. 아리스토텔레스의 플롯이론을 근거로 하는 도입, 발전, 전개 결말구조의 의미가 인류의 삶과 운명의 메타포이며, 융 이론에 영향 받은 융 연구가 캐롤 피어슨의 인물 원형론의 성장단계가 인류의 삶과 운명의 메타포임을, 역시 융 이론에 영향 받은 인류학자 조셉 캠벨 이론들은 희노애락의 복합감정을 영웅원형에 투사하여 영웅의 여정이란 은유를 통해 인류의 삶과 운명의 메타포임을 밝히고 있다. 최종적으로, 제기된 이론들은 크리스토퍼 보글러의 저서에 작가의 '시나리오작성법'으로 접근하여 소개되고 있다. 한편으로 이 메타포는 이 연구목표이자 목적이기도 하다. 연구에서 추출된 장편연재만화는 긴 이야기가 복잡하고 얽힌 듯이 보여도 인물이 집을 떠나 모험과 난관을 겪고 세계와의 또 다른 만남을 통해 거부와 갈등, 그리고 경쟁과 전쟁, 시련을 겪으며 보상을 얻어 귀환하는 여정의 과정 중 정신적, 심리적, 상징적 성장으로 결국, 영웅으로 획득되며 만화라는 이미지를 통하여 우리의 내면 성찰에 대한 의미 부여를 플롯에 의해 서사적으로 표현하고 있다. 복잡해보이지만 장편연재만화이야기의 기본구조가 플롯 4단계이며 장편연재만화작품에서 범상치 않은 인물이 여행과 모험을 떠나는 과정에서 성장하는 삶의 방식을 크게 나누어 볼 때, 네 단계의 영유아동기, 청년기, 중년기, 말년기의 상징성을 지닌 심리적 성장과정이며, 인물이 유형화된 특성도 크게 네 단계의 부류로 나누어 성장과정을 설명할 수 있게 한다. 성장할 인물의 표상화인 영웅의 여정, 역시 크게 네 단계의 여정으로 압축되어 설명된다. 즉 이론을 통하여 만화의 4국면의 플롯의 복잡 배열은 삶의 순서를 통한 성장구조의 진행과의 흐름이 일치한다는 것을 발견하였다. 동시에 인물이 영웅으로 거듭나는 성찰의 메타포이며 장편연재만화작가들의 작품을 통하여 인생국면 4단계인 인물의 성장과 삶을 통찰하는 은유를 발견하였다. 만화작가가 의도하는 장편연재만화작품의 긴 이야기란, 플롯의 논리적구성법에 의해 인물이 여정을 떠나 역경과 어려움을 겪으며 삶이 변화되고 그의 성장과정은 유형화된 이미지로 제시하여 성찰에 도달함을 영웅적으로 표현하는 것이며, 독자는 삶과 인생에서 만화이야기의 이미지의 시공간을 공유하는 동시에 감동을 통하여 정서상 인물과 같은 체험을 하게 되었음을 인식하게 한다.
An important business-field of world-wide steel-industry is the coating of thin metal-sheets with zinc, zinc-aluminum and aluminum based materials. These products mostly go into automotive industry. in particular for the car-body. into building and construction industry as well as household appliances. Due to mass-production, the processing is done in large continuously operating plants where the mostly cold-rolled metal-strip as the substrate is handled in coils up to 40 tons unwind before and rolled up again after passing the processing plant which includes cleaning, annealing, hot-dip galvanizing / aluminizing and chemical treatment. In the liquid Zn, Zn-AI, AI-Zn and AI-Si bathes a combined action of corrosion and wear under high temperature and high stress onto the transfer components (rolls) accounts for major economic losses. Most critical here are the bearing systems of these rolls operating in the liquid system. Rolls in liquid system can not be avoided as they are needed to transfer the steel-strip into and out of the crucible. Since several years, ceramic roller bearings are tested here [1.2], however, in particular due to uncontrollable Slag-impurities within the hot bath [3], slide bearings are still expected to be of a higher potential [4]. The today's state of the art is the application of slide bearings based on Stellite\ulcorneragainst Stellite which is in general a 50-60 wt% Co-matrix with incorporated Cr- and W-carbides and other composites. Indeed Stellite is used as the bearing-material as of it's chemical properties (does not go into solution), the physical properties in particular with poor lubricating properties are not satisfying at all. To increase the Sliding behavior in the bearing system, about 0.15-0.2 wt% of lead has been added into the hot-bath in the past. Due to environmental regulations. this had to be reduced dramatically_ This together with the heavily increasing production rates expressed by increased velocity of the substrate-steel-band up to 200 m/min and increased tractate power up to 10 tons in modern plants. leads to life times of the bearings of a few up to several days only. To improve this situation. the Mechanical Alloying (MA) TeChnique [5.6.7.8] is used to prOduce advanced Stellite-based bearing materials. A lubricating phase is introduced into Stellite-powder-material by MA, the composite-powder-particles are coated by High Energy Milling (HEM) in order to produce bearing-bushes of approximately 12 kg by Sintering, Liquid Phase Sintering (LPS) and Hot Isostatic Pressing (HIP). The chemical and physical behavior of samples as well as the bearing systems in the hot galvanizing / aluminizing plant are discussed. DependenCies like lubricant material and composite, LPS-binder and composite, particle shape and PM-route with respect to achievable density. (temperature--) shock-reSistibility and corrosive-wear behavior will be described. The materials are characterized by particle size analysis (laser diffraction), scanning electron microscopy and X-ray diffraction. corrosive-wear behavior is determined using a special cylinder-in-bush apparatus (CIBA) as well as field-test in real production condition. Part I of this work describes the initial testing phase where different sample materials are produced, characterized, consolidated and tested in the CIBA under a common AI-Zn-system. The results are discussed and the material-system for the large components to be produced for the field test in real production condition is decided. Outlook: Part II of this work will describe the field test in a hot-dip-galvanizing/aluminizing plant of the mechanically alloyed bearing bushes under aluminum-rich liquid metal. Alter testing, the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed. Part III of this project will describe a second initial testing phase where the won results of part 1+11 will be transferred to the AI-Si system. Part IV of this project will describe the field test in a hot-dip-aluminizing plant of the mechanically alloyed bearing bushes under aluminum liquid metal. After testing. the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed.
본 논문에서 우리는 새로운 방식의 IMT-2000 대역 DGS(Defected Ground Structure) 도허 티 증폭기를 제안하였다. 근본적으로 도허티 증폭기의 능동 로드-풀 회로 해석 기법은 이상적인 고조파 단락 상태를 가정한다. 그러나 기존의 논문에서는 대부분 이러한 이상적인 고조파 단락을 간과하고 있었다. 우리는 도허티 주 증폭기의 부하 변조 동작에 필수적인 출력단의 임피던스 변환 전송 선로와 보조 증폭기의 출력 임피던스 보정을 위한 오프셋 전송 선로에 DGS를 적용함으로써 이러한 가정을 만족시킴과 동시에 이득, 효율 그리고 최대 출력 전력을 개선하였으며, 선형성 개선과 상당한 크기 감소 효과도 얻을 수 있었다. 제안된 DGS 도허티 증폭기의 2차, 3차 고조파는 비교 대상으로 제작된 일반적인 도허티 증폭기에 비해 각각 44.92 dB, 23.77 dB 이상 차단되었다. 그 결과로서 얻어진 DGS 도허티 증폭기의 P1 dB는 0.42 dB 증가하였고 드레인 효율은 최대
본 논문에서는 구형 빔 패턴을 효율적으로 형성하기 위한 새로운 MDAS-DR 안테나 구조를 제안하였다. 안테나 구조는 크게 스택 마이크로스트립 패치 여기 소자, 다층 원형 도체 배열 소자들과 그 주위를 에워싸고 있는 유전체 링으로 구성된다. 다층 원형 도체 배열 구조는 스택 마이크로스트립 패치 여기 소자에 의해 방사 전력을 공급 받아 그 주변의 유전체 링과의 전기적 상호 결합 작용에 의해 원거리에서 구형 빔 방사 패턴을 형성할 수 있다. 유전체 링 구조의 설계 변수는 다층 원형 도체 배열 구조의 설계 변수와 더불어 구형 빔 패턴 형성에 중요한 설계 변수들로서 구형 빔 안테나를 위해 12개의 다층 원형 도체 배열과 유전율이 2.05인 테프론 유전체가 사용되었다. 제안된 안테나 구조의 유효성을 검증하기 위하여 10 GHz 대역
This study was designed to evaluate the microhardness of restorative composite resin and dual-cured composite resin cement which were light cured through the 1.5mm thickness composite overlay. For restorative materials, Z100 and Tetric Ceram were used. For dual cured composite cements, Variolink II((VL II) of three consistency (low, high, ultra high) were used. To determine the optimal microhardness of Z100, Tetric Ceram and Variolink II, each material was packed into the 1mm thickness teflon mold without composite overlay and light cured for 60 seconds. Then the microhardnesses of each sample were measured, averaged and regarded as optimal hardness of each material. To evaluate the microhardness of restorative composite resin and dual-cured composite resin cement which were light cured through the 1.5mm thickness composite overlay, the composites were packed into 1mm thickness teflon mold, coverd with celluloid strip, and then precured composite overlay which was made of Targis(Ivoclar/Vivadent, Liechtenstein) was positioned. 2 types of visible light curing machine, the power density of one of which was 400
The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70
The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70