대한치과보철학회지 (The Journal of Korean Academy of Prosthodontics)

  • 제45권3호
  • /
  • Pages.303-309
  • /
  • 2007
  • /
  • 0301-2875(pISSN)
  • /
  • 2005-3789(eISSN)
대한치과보철학회 (The Korean Academy of Prosthodonitics)
권호 표지

THE EFFECT OF GOLD ELECTROFORMING PROCEDURE ON GOLD-SILVER-PALLADIUM ALLOY

  • Hwang, Bo-Yeon (Department of Prosthodontics, College of Dentistry, Seoul National University) ;
  • Kim, Chang-Whe (Department of Prosthodontics, College of Dentistry, Seoul National University) ;
  • Lim, Young-Jun (Department of Prosthodontics, College of Dentistry, Seoul National University) ;
  • Kim, Myung-Joo (Department of Prosthodontics, College of Dentistry, Seoul National University)
  • 발행 : 2007.06.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Statement of problem. The effect of gold electroforming on gold alloy was not studied. Purpose. This in vitro study investigate the effect of gold electroforming on gold-silver-palladium alloy. Material and methods. Three pieces of gold strips had undergone the electroforming procedures on one side and then half of the side again electroformed. The set mode for this study was program 1 ($200{\mu}m$). And the processing time was 15min (1/20 time to form $200{\mu}m$ coping). The confocal laser scanning microscope (PASCAL 5, Carl Zeiss, Bernried, Germany) was used to measure the thickness of the pure gold layer electroformed on the gold strips. Half of the gold strip was coated two times with electroformed gold, and the other half one time. The data from the cone focal laser system was processed to get the vertical profile of the strips and the difference of the vertical height between the double coated and single coated layer was regarded as the thickness of the gold coating. The layer thickness value to built 3D image of the cone-focal laser was set $0.5{\mu}m$. Next to the measurement of the thickness of the coating, the Vicker's hardness test was done. It was performed on the double coated surface, single coated surface and non-coated surface (back side) three times each. Results. The mean thickness value gained from gold electroforming technique was measured to be $22{\mu}m$ for sample 1, $23{\mu}m$ for sample 2, $21{\mu}m$ for sample 3. In the same condition of time, power and the amount of electrolyte, the data showed no difference between samples. According to the results of variance analysis, the differences among the variations in number of coating were statistically insignificant (p>0.05), meaning that the two times of gold electroforming coating did not change the hardness of gold-silver-palladium alloy. Conclusion. The test of thickness of gold coating proved the coherency of the gold electroforming procedure, in other words, when the power, the exposed surface area, processing time and the amount of electrolytes were set same, the same thickness of gold would be coated on. The hardness test showed that the electroformed gold coating did not change the hardness of the gold-silver-palladium alloy when it is coated not more than $45{\mu}m$.

키워드

참고문헌

  1. Rogers OW. Armstrong BW. Electroforming a Gold Matrix for Indirect Inlays. J Prosthet Dent 1961:11:959-966 https://doi.org/10.1016/0022-3913(61)90156-1
  2. Rogers OW. The dental application of electro-formed pure gold I. Aust Dent J 1979:24:163-170 https://doi.org/10.1111/j.1834-7819.1979.tb02417.x
  3. Rogers OW. The dental application of electroformed pure gold II. Aust Dent J 1980:25: 1-6 https://doi.org/10.1111/j.1834-7819.1980.tb03655.x
  4. Rogers OW. The dental application of electroformed pure gold III. Aust Dent J 1980:25:205-8 https://doi.org/10.1111/j.1834-7819.1980.tb03865.x
  5. Wright IH, Vesey CJ. Acute Poisoning with gold cyanide. Anaesthesia 1986:41:936-9 https://doi.org/10.1111/j.1365-2044.1986.tb12920.x
  6. Klett R, Hornig W. Die galvanisierte Kronenhuelse. Dtsch Zahnaerztl Z 1987:42:614-7
  7. Traini T. Electroforming technology for ceramometal restorations. Quintessence Dent Technol 1995:18:21-28
  8. Traini T. Electroforming technology for ceramometal restorations. Quintessence 1995:26:21
  9. Setz J, Diehl J, Weber H. The marginal fIt of cemented galvano-ceramic crowns. Int J Prosthodontic 1989:2:61
  10. Horn V, Kappert HF. Festigkeit van dreigliedrigen Galvanobrucken im Seitenzahmbereich. Dtsch Zahnartzl Z 1992:9
  11. Diedrichs G: Rosenhein P. Galvanoforming: Bioesthetique in der Restorativen Zahnheilkunde. Neuer Merkur 1995
  12. Traini T. Electroforming technology for ceramometal restorations. Quintessence 1995:26:21
  13. Setz J; Diehl J; Weber H. The marginal fit of cemented galvano-ceramic crowns Int J Prosthodontic 1989:2:61
  14. Korber KH. Cone crowns-a physically defined telescopic system. [in German] Dtsch Zahnarztl Z 1968:23:619-30
  15. Langer A. Telescope retainers and their clinical application. J Prosthet Dent 1980:44:516-22 https://doi.org/10.1016/0022-3913(80)90070-0
  16. Boettger H, Engelhardt JP. Das telescopsystem in der zahnaerztlichen praxis. Quintessenz 1971: 22:61-5
  17. Koeber KH. Konuskronen telescope einfuerung in klinik and technik. Heidelberg: Dr. Alfred Huetig Verlag GmbH, 1971
  18. Hofman M, Ludwig P. Die telekopierende totalprothese im stark reduzierten Lueckengebiss. Dtsch Zahnaerztl Z 1973:28:2-17
  19. Ohkawa S, Okane H, Nagasawa T, Tsuru H. Changes in retention of various telescope crown assemblies over long term use. J Prosthet Dent 1990: 64:153 https://doi.org/10.1016/0022-3913(90)90170-H
  20. Renner RP, Gomes BC, Shakun ML, Baer PN, Davis RK, Camp P. Four-year longitudinal study of the periodontal health status of over denture patients. J Prosthet Dent 1984:51 :593 https://doi.org/10.1016/0022-3913(84)90399-8
  21. Korber, K. Konuskronen. Das rationelle Teleskopsystem Einftihrung in. Klinik und Technik. 1988:p 64. Dr Alfred Huthig Verlag GmbH Heidelberg, Germany
  22. Lenz J. Ein mathematicsches Modell zur Berechung des Haftund Festigkeitsvrhaltens van konischen Teleskopronen. Deutsche Zahnartzliche Zeitschrift 1982:37:7
  23. Lenz J, Schindler HJ, Pelka H. Das konische Teilteleskop und andere Modifikationen der keramikverblendeten kouskrone. Dental Labor. 1992:12:2078
  24. Besimo CH, Graber G, Fluhler M. Retention force changes in implant-supported titanium telescope crowns over long-term use in vitro. J Oral Rehabil 1996:23:372 https://doi.org/10.1111/j.1365-2842.1996.tb00866.x
  25. Beker H. Der Einfluss van Zahnpasta auf das Hafttverhalten Parallelwandiger Teleskopkronen. Zahnarzliche Praxis 1983:8:332
  26. Margareta Molin, Bo Bergman, Ake Ericson. A clinical evaluation of conical crown retained dentures. J Prosthet Dent 1993:70:251-6 https://doi.org/10.1016/0022-3913(93)90060-2
  27. Johan Hulten, Bo Tillstrom, Kister Nilner. Long term clinical evaluation of conical crown retained dentures. Swed Dent J 1993:17:225-234
  28. Yoshimasa I, Tadamas G. Ten-year follow-up study of conical crown-retained dentures. Int J Prosth 1997:10:149-155