• Smart Structures and Systems
• /
• 제17권6호
• /
• pp.1067-1085
• /
• 2016

Nonstationary features existing in tropical storms have been frequently captured in recent field measurements, and the applicability of the stationary theory to the analysis of wind characteristics needs to be discussed. In this study, a tropical storm called Nakri measured at Taizhou Bridge site based on structural health monitoring (SHM) system in 2014 is analyzed to give a comparison of the stationary and nonstationary characteristics. The stationarity of the wind records in the view of mean and variance is first evaluated with the run test method. Then the wind data are respectively analyzed with the traditional stationary model and the wavelet-based nonstationary model. The obtained wind characteristics such as the mean wind velocity, turbulence intensity, turbulence integral scale and power spectral density (PSD) are compared accordingly. Also, the stationary and nonstationary PSDs are fitted to present the turbulence energy distribution in frequency domain, among which a modulating function is included in the nonstationary PSD to revise the non-monotonicity. The modulated nonstationary PSD can be utilized to unconditionally simulate the turbulence presented by the nonstationary wind model. The results of this study recommend a transition from stationarity to nonstationarity in the analysis of wind characteristics, and further in the accurate prediction of wind-induced vibrations for engineering structures.

• 한국운동역학회지
• /
• 제18권4호
• /
• pp.49-57
• /
• 2008

이 연구는 고령자를 대상으로 탄성저항운동을 수행하였을 경우 운동 전 후로 보행 시 지면반력 신호 크기와 이들의 variability에 어떠한 영향을 미치는 가를 구명하고자 하였다. 이를 위하여 여성 고령자 12명을 대상으로 12주간 탄성저항운동을 실시하였으며, 운동 전 후로 보행 시 3방향 지면반력 신호의 주파수 크기와 variability 값을 산출하였다. FFT(fast Fourier transform)를 이용하여 주파수 분석을 하였으며, PSD(power spectral density)를 계산하였다. 총 대상자들의 변이 계수(SD/Mean*100)을 이용하여 집단 간 variability를 계산하였다. 그 결과 다음과 같은 결론을 얻었다. 지면반력 신호의 주파수 크기는 좌우 방향에서 운동 전보다 운동 후에 작은 값을 보였으며, 통계적으로도 유의한 차이(p<.05)가 나타났다. 지면반력 신호의 variability에서는 좌우 방향에서 운동 전보다 운동 후에 큰 값이 나타났으며, 통계적으로도 유의한 차이(p<.05)가 나타났다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권8호
• /
• pp.2900-2922
• /
• 2021

In this paper, the power spectral density(PSD) for Multilevel Minimum Shift Keyed signal with modulation index h = 1/2 (M-ary MSK) are derived using the mathematical method of the Markov Chain model. At first, according to an essential requirement of the phase continuity characteristics of MSK signals, a complete model of the whole process of signal generation is built. Then, the derivations for autocorrelation functions are carried out precisely. After that, we verified the correctness and accuracy of the theoretical derivation by comparing the derived results with numerical simulations using MATLAB. We also divided the spectrum into four components according to the derivation. By analyzing these figures in the graphic, each component determines the characteristics of the spectrum. It is vital for enhanced spectral characteristics. To more visually represent the energy concentration of the main flap and the roll-down speed of the side flap, the specific out-of-band power of M-ary MSK is given. OMLCD(Optimum Maximum Likelihood Coherent Detection) of M-ary MSK is adopted to compare the signal received with prepared in advance in a code element T to go for the best. And M-ary MSK BER(Bit Error Rate) is compared with the same ary PSK (Phase Shift Keying) with M=2,4,6,8. The results show the detection method could improve performance by increasing the length of L(memory inherent) in the phase continuity.

• 한국정보통신학회논문지
• /
• 제7권8호
• /
• pp.1612-1620
• /
• 2003

본 논문에서는 GaAsFET 전력증폭기를 다중반송 통신시스템에서 적용시키고자 설계한 PA증폭기의 측정된 전달함수를 비선형 모델링 한 결과를 제시하였으며 모델링 한 결과를 가지고 설계한 RF 증폭기의 AM­AM 및 AM­PM 비선형 특성을 추정하였다. 추정된 비선형특성 의하여 다중반송전송시스템에서의 증폭기의 근접채널간섭특성(ACPR), QPSK 및 64­QAM과 같은 디지털 변조 신호에 대하여 성상도에서의 데이터 오차벡터의 크기(EVM) 및 BER 관계를 분석하였다. 본 연구에서 제시한 RF GaAs FET의 비선형 모델링은 OFDM을 이용하는 무선 다중반송전송시스템 설계에 적용할 수 있으며 전력증폭기와 디지털 변조 신호에 따른 비선형 관계를 정확하게 추정할 수 있다.

• 한국해양공학회지
• /
• 제25권2호
• /
• pp.1-6
• /
• 2011

Vibration-based Structural Health Monitoring (SHM) systems use field measurements of operational signals, which are distorted by noise from many sources. Reducing this noise allows a more accurate assessment of the original "clean" signal and improves analysis results. The implementation of a noise reduction methodology for the Modal Distribution Method (MDM) is reported here. The spectral subtraction method is a popular broadband noise reduction technique used in speech signal processing. Its basic principle is to subtract the magnitude of the noise from the total noisy signal in the frequency domain. The underlying assumption of the method is that noise is additive and uncorrelated with the signal. In speech signal processing, noise can be measured when there is no signal. In the MDM, however, the magnitude of the noise profile can be estimated only from the magnitude of the Power Spectral Density (PSD) at higher frequencies than the frequency range of the true signal associated with structural vibrations under the additional assumption of white noise. The implementation of the spectral subtraction method to MDM may decrease the energy of the individual mode. In this work, a modification of the spectral subtraction method is introduced that enables the conservation of the energies of individual modes. The main difference is that any (negative) bars with a height below zero after subtraction are set to the absolute value of their height. Both noise reduction methods are implemented in the MDM, and an application example is presented that demonstrates its effectiveness when used with a signal corrupted by noise.

• International Journal of Aeronautical and Space Sciences
• /
• 제16권2호
• /
• pp.254-263
• /
• 2015

In this study, numerical simulations are carried out to investigate the dynamic SGS model effects in a Kerosene-LOx coaxial swirl injector under high pressure conditions. The turbulent model is based on large-eddy simulation (LES) with real-fluid transport and thermodynamics. To assess the effect of the dynamic subgrid-scale (SGS) model, the dynamic SGS model is compared with that of the algebraic SGS model. In a swirl injector under supercritical pressure, the characteristics of temporal pressure fluctuation and power spectral density (PSD) present comparable discrepancies dependant on the SGS models, which affect the mixing characteristics. Mixing efficiency and the probability density (PDF) function are conducted for a statistical description of the turbulent flow fields according to the SGS models. The back-scattering of turbulent kinetic energy is estimated in terms of the film thickness of the swirl injector.

• 항공우주기술
• /
• 제5권2호
• /
• pp.102-107
• /
• 2006

본 논문은 위성체 동적 환경의 발사체 구조에 의해 전달된 저 주파수의 과도 진동과 불 규칙적인 가속력으로 구성되어 있다. 저 주파수에서의 과도 진동은 보통 진동수 100 ~ 200Hz에 이르는 정현파로 근사되며 주로 예비설계에 사용된다. 그리고, 랜덤 환경은 발사체의 연소와 분리 단계, 외부 공력소 음에 의한 구조적 진동에 의해 발생한다. 이는 발사체 구조물을 통하여 위성체와 발사체의 어댑터 구조로 전달된다. 이러한 동적환경 중에서 랜덤 진동 해석은 위성체에 수행되는데, 특히, 위성체 내의 전자 박스(장비) 는 실제 상황에 가깝게 하여 검증하기 위해 랜덤 진동 실험을 통해 설계 되야 한다.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1998년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Spring 1998
• /
• pp.304-311
• /
• 1998

An algorithm to enhance spectra matching of acceleration time history used in the seismic analysis of nuclear power plants(NPP) is proposed. The new scheme provides the solution on the highly fluctuating and over conservatism problems that happened in order to satisfy design spectrum enveloping criteria in the traditional method. To obtain optimized spectrum for a time history, a spectrum matching procedure that adapts a system identification technique is also developed. The algorithm also introduces maximum displacement control, baseline correction, clipping and raising of maximum peak of time history, and power spectral density (PSD) control of time history. It is verified through numerical examples that this new scheme can definitely generate acceleration time history, closely matching the target spectra and satisfying other stipulated requirements.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.350-355
• /
• 2008

A Rubber mount is widely used for mechanical parts or engineering materials. Especially, it plays an important role in reducing mechanical vibration due to cyclic loading. But, rubber mount is damaged due to the cyclic loading and resonance. Therefore, it is necessary to investigate evaluation of fatigue life considering vibration characteristics for rubber. In this study, a vibration fatigue analysis was performed and based on Power Spectral Density(PSD) and the stress-life curve and a result of frequency response analysis in the finite element method. The measured load history in experiment was transformed to PSD curve. The stress-life curve was obtained by nonlinear static analysis and fatigue test. In addition, frequency response analysis was conducted for mechanical part. In order to evaluate fatigue life of rubber mount, vibration fatigue test was conducted at the constant acceleration-level as well. Fatigue life was determined when the load capacity is reduced to 60% of its initial value. As a result, predicted fatigue life of rubber mount agreed fairly well with the experimental fatigue life.

• 센서학회지
• /
• 제8권4호
• /
• pp.308-313
• /
• 1999

본 논문에서는 TMAH를 이용한 비등방성 에칭기술을 이용하여 3차원의 자장의 값을 측정하기 위한 경사각 구조의 3차원 자기센서를 제작하였다. 제작된 3차원 자기센서는 비등방성 식각에 의하여 [100] 결정방향의 Si 표면에 [111] 결정방향의 경사면을 구성하여 이 경사면에 경사각 Hall 소자를 제작하였으며, 기존의 3차원 자기센서에 비하여 개선된 감도 특성을 나타내었다. 제작된 소자의 적감도는 547V/AT 이었으며 자기센서 출력의 PSD 성분의 측정에 의해 계산 되어진 최소측정 자장은 0.07G 이었다.