• 대한기계학회논문집A
• /
• 제22권3호
• /
• pp.654-662
• /
• 1998

Shift quality of an automatic transmission in a vehicle is mainly affected by transient pressures in the hydraulic system during shifting. In this study, dynamic modelings of the hydraulic system and the power train of an automatic transmission are made systematically by a bond-graph method. The dynamic characteristics of the line pressures and clutch/brake pressures during shiftings are investigated by simulations and verified by experiments. The effects of clutch/brake pressures on the shift torque are also investigated through driving simulation.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.790-793
• /
• 2005

Gap Sensor is widely used to measure vibration in power plant. In general the result of the vibration measurement may have special error due to two thermal characteristics of gap sensor such as sensitivity shift and zero shift. Thermal sensitivity is change of linearity and thermal zero shift is chang of offset. It is investigated two thermal characteristics for Rap son or in this paper.

• Nuclear Engineering and Technology
• /
• 제34권2호
• /
• pp.176-185
• /
• 2002

A 4-bundle shift refuelling method of CANDU6 F/H (Fuel Handling) System is analyzed to assess the operational flexibility and capacity of F/H system. The current 8-bundle shift refuelling scheme requires to refuel eight fuel bundles from a single fuel channel, and to refuel 14 fuel channels in a week on average assuming that the reactor is in a steady state. The analysis showed that the 4-bundle shift refuelling method increases F/M (Fuelling Machine) duty cycle and operator load. However, the fuellin’g method change from the 8- to 4-bundle shift refuelling ill not require additional team of operators. A marginal increase in the maintenance cost may be resulted in by the change of fuelling method and the increase of fatigue usage factors requires some components to be replaced during the FM lifetime.

• 전력전자학회논문지
• /
• 제21권3호
• /
• pp.275-281
• /
• 2016

A novel bidirectional magnetic wireless communication system is proposed in this study. This system provides the communication capability between the source and load sides by high-frequency signal while wireless power is transferred. Contrary to the conventional wireless communication systems using complex IC circuit and active components, the proposed system is simply composed of passive components. It is practical and beneficial for environmental robustness, cost effectiveness, and simple implementation. The detailed static analysis of the proposed system for power and communication lines is established. The proposed system is experimentally verified, and results show that a 0.1 voltage gain for communication line is obtained while a 2.0 voltage gain for the power line is achieved. The proposed system is adequate for practical applications as it allows the inductive power transfer system to wirelessly and easily communicate between the source and load sides.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2017년도 추계학술대회
• /
• pp.111-112
• /
• 2017

This paper presents a novel three-port converter for the OnBoard Charger of Electric Vehicles by using an impedance control network. The proposed concept is suitable for charging a main battery and an auxiliary battery of an electric vehicle at the same time due to its power handling capability of the converter without additional switches. The power flow is managed by the phase angle (${\Theta}$) between the ports whereas voltage at each port is controlled by the asymmetric duty cycle and the phase shift (${\Phi}$) between the inverter lags controlled by the impedance control network. The proposed system has a capability of achieving zero voltage switching (ZVS) and zero current switching (ZCS) at all the switches over the wide range of input voltage, output voltage and output power. The feasibility of the proposed system is verified by the PSIM simulation.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제14권4호
• /
• pp.305-312
• /
• 2014

This paper discusses real-time peak shaving algorithms for a large-scale battery energy storage system (BESS). Although several transmission and distribution functions could be implemented for diverse purposes in BESS applications, this paper focuses on a real-time peak shaving algorithm for an energy time shift, considering wind power generation. In a high wind penetration environment, the effective load levels obtained by subtracting the wind generation from the load time series at each long-term cycle time unit are needed for efficient peak shaving. However, errors can exist in the forecast load and wind generation levels, and the real-time peak shaving operation might require a method for wind generation that includes comparatively large forecasting errors. To effectively deal with the errors of wind generation forecasting, this paper proposes a real-time peak shaving algorithm for threshold value-based peak shaving that considers fuzzy wind power generation.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2013년도 전력전자학술대회 논문집
• /
• pp.45-46
• /
• 2013

멀티레벨 고압인버터 토폴로지 중 저압 Power Cell를 이용하여 고압을 출력하는 Cascaded 방식이 산업계에서는 널리 사용되고 이다. 최근 제품화된 Cascaded 방식은 크게 두 가지 형태로 구분할 수 있다. 저압 Power Cell에 단상 H-Bridge를 이용한 Cascaded H-Bridge 멀티레벨 인버터와 단상 NPC(Neutral Point Clamped) 토폴로지를 적용한 Cascaded NPC 멀티레벨 인버터이다. 이 중 Cascaded NPC 멀티레벨 인버터의 경우 적은 수의 셀을 사용하여 CHB와 동일한 출력 레벨을 생성할 수 있으며, NPC 방식의 고압 인버터 고유의 장점을 모두 구현할 수 있다. 반대로 CHB Type과 NPC type의 단점인 복잡한 구조의 Phase Shift Transformer와 DC_Link 중성점 전압이 변동하는 단점 또한 나타나게 된다. 본 논문에서는 Cascaded NPC 멀티레벨 인버터의 이러한 단점을 극복하기 위한 새로운 방식의 Phase Shift Transformer와 NPC Power Cell의 중성점 전압 변동을 줄일 수 있는 기법에 대해 설명하고 이 기법에 대한 타당성을 모의시험을 통해 검증하였다.

• 드라이브 ㆍ 컨트롤
• /
• 제10권4호
• /
• pp.7-13
• /
• 2013

A tractor is a farm vehicle that is designed to provide a high tractive effort at low speed. It is used for versatile agricultural tasks such as hauling a trailer, tillage, mowing and construction work. As the intensity of work increases, tractors equipped with automatic transmission become popular due to the work convenience. Though manual and power shuttle transmissions are produced by domestic corporations, development for full-automatic power shift transmissions has never been challenged, and so related technology level is quite low. This paper gives a survey of the automatic transmissions from advanced foreign company, which includes layout of gear train, the way hydraulics controls clutches and brakes, electronic control system. The results are expected to be utilized as a basis in the development of original power train design for tractor.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 C
• /
• pp.871-874
• /
• 1998

It is most important in small signal stability analysis of large scale power systems to compute only the dominant eigenvalues selectively with numerical stability and efficiency. Hessenberg process is numerically very stable and identifies the largest eigenvalues in magnitude. Hence, transformed system matrix must be used with the process. Inverse transformation with complex shift provides high selectivity centered on the shift, but does not possess the desired property of computing the dominant mode first. Thus, advantage of high selectivity of the transformation can be fully utilized only when the complex shift is given close to the dominant eigenvalues. In this paper, complex shift is determined by Fourier transforming the results of dynamic simulation with PTI's PSS/E transient simulation program. The convergence in Hessenberg process is accelerated using the iterative scheme. Overall, a numerically stable and very efficient small signal stability program is obtained. The stability and efficiency of the program has been validated against New England 10-machines 39-bus system and KEPCO system.

• 전력전자학회논문지
• /
• 제10권6호
• /
• pp.598-609
• /
• 2005

기존의 위상 천이 풀-브릿지 컨버터는 변압기 2차측 다이오드의 전압 스트레스를 증가시키는 심각한 전압 진동 문제를 가지고 있으며, 이를 해결하기 위한 부가적인 스너버의 사용은 전체 시스템 효율의 저하를 초래한다. 본 논문에서는 부가적인 스너버의 사용없이 효과적으로 전압 진동 문제를 해결하는 위상 천이 풀-브릿지 컨버터의 새로운 동작 방식을 제안한다. 또한 제안된 방법은 동작 특성 상 넓은 영전압 스위칭 범위를 보장하므로 향상된 효율을 기대할 수 있다. 기존의 동작 방식과 비교하여 제안된 전압 진동 제거 기술의 동작 원리, 전압 진동 분석 및 설계 고려 사항을 나타내었으며, 420W사양의 시험모델을 제작하여 제안된 전압 진동 제거 기술의 타당성을 입증하였다.