• 대한전자공학회논문지
• /
• 제10권4호
• /
• pp.60-73
• /
• 1973

두개의 검출기를 사용한 상호상관함수법으로 원자로의 잡음을 해석하여 TRIGA MARK-II 원자로의 동특성과 원자로의 안전을 위한 계수율 및 미임계시의 반응도를 측정하였다. 본 실험결과 원자로의 영출력과 전출력시의 임계상태에서 α값은 각각 46.67과 70.04로 얻어졌으며 안전봉낙하에 의한 임계미미상태에서는 79.47, 그리고 조정봉낙하에 의한 임계미만에서는 97.57로 얻어졌다. 이때 l*값은 β가 0.0075때에 107μsec와 160μsec로 나타났으며 Shut down margin의 미임계도는 안전봉낙하시에 -10.03×10-4이었고 조정봉낙하시에는 -29.43×10-4이었다. 본 실험에서는 CDC 3100/MSOS Digital 전자계산기, HITACH 505 Analog 전자계산기와 직접 제작한 Preamplifier, Bandpass filter, FM-Moulator, FM-Demodulator 등을 이용하여 계산 측정하였다.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1997년도 춘계학술발표회논문집(1)
• /
• pp.310-315
• /
• 1997

System-Integrated Modular Advanced Reactor (SMART), where major primary components such as modular helical steam generator and self regulating pressurizer are integrated into reactor vessel, is currently under development. The pressurizer is designed to control the primary pressure mainly with partial pressure of nitrogen gas and to maintain the fluid temperature as low as possible for the purpose of minimizing steam contribution. The steam generator (SG) is designed to produce super-heated steam inside tube at power operation. Because the in-vessel pressurizer and in-vessel SG are classified as the characteristic components of SMART, it is important to perform a steady state calculation of these components in order to evaluate the adoption of these components. A steady state analysis of the in-vessel pressurizer and in-vessel SG has been performed under normal power operation and the results show an acceptable performance of the components.

• 전력전자학회논문지
• /
• 제2권2호
• /
• pp.49-56
• /
• 1997

스위치드 리럭턴스 전동기(switched reluctance motor : 이하 SRM 이라 칭함)는 가변 인덕턴스 프로파일의 비선형성과 리플성분이 포함된 펄스전류에 구동되는 본질적인 특성 때문에 토오크는 맥동성분을 포함한다. 본 논문에서는 토오크의 맥동에 영향을 미치는 전류파형 형태를 고찰하고, 속도나 부하에 관계없이 어드밴스 각(advance angle)와 여자전압을 제어함으로써 토오크 맥동을 저감할 수 있는 단일 펄스모드 스위칭 제어방법을 제안하였다. 그리고 설계 제작된 6/4 SRM을 이용하여 제안한 스위칭 제어방법의 타당성을 실험적으로 확인하였다.

• 대한전기학회논문지
• /
• 제40권8호
• /
• pp.757-764
• /
• 1991

This paper proposes a novel control method of voltage type current-controlled reactive/harmonic compensator. The proposed method does not rely on the explicit computation of load power, but indirectly controls the compensation current by regulating dc link voltage of the converter. It is shown that the system can be modeled as a simple linear system that facilitates an analytical approach to the system characteristics. With the model, the effects of the controller gains on the dynamic and steady state response of the system are investigated. Experimental results show that the proposed control method works well in spite of the simplicity of control circuitry.

• 전기의세계
• /
• 제23권1호
• /
• pp.73-78
• /
• 1974

Digital simulation algorithms and program for multimachine dynamic stability have been developed which represent the effects of machines much more complety than have been available previously. Emphasis is given to the savings of the memory spaces required, thus making it possible to use a small computer with limited capacity of core storage (without auxiliary storage). Both d- and q- aris quantities are fully represented, and the speed-governing and voltage-regulating system available are ertensive, thus allowing a very close approximation to any physical system. Facilities for dynamic and nonlinear loads are also included. The computational algorithms and program developed have been shown to be extensive and complete, and are very desirable features minimizing memory spaces for stability calculations. The capabilities have been demonstrated by several case studies for an actual power system of 44 generators, 22 loads and 33 buses. About 13-K words of memory spaces have been required for the case studies on the basis of two words per real variable and a word per integer variable.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 추계학술대회 논문집
• /
• pp.193-196
• /
• 2003

For a power source of usual electronic devices such as PDA, smart phone, UPS and electric vehicle, the battery made of serially connected multiple cells is generally used. In this case, if there are some unbalanced among cell voltages, the total lifetime and the total capacity of the battery are limited to a lower value. To maintain a balanced condition in cells, an effective method of regulating the cell voltage in indispensable. In this paper introduced a method for battery balancing system using dissipation in the resistance.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 추계학술대회 논문집
• /
• pp.128-132
• /
• 2004

This paper proposed a control strategy for flywheel energy/recovery system with induction machine. The system is based on a vector controlled induction machine driving a flywheel and address the problem of regulating the DC-Link system voltage against input power shut-down. And we proposed the method to damp the oscillation of DC-Link. Experimental results are presented which verify the performance of the strategy.

• Journal of Power Electronics
• /
• 제7권3호
• /
• pp.238-245
• /
• 2007

This paper considers the problem of regulating the output voltage of a current doubler rectified asymmetric half-bridge (CDRAHB) DC/DC converter via fuzzy integral control. First, we model the dynamic characteristics of the CDRAHB converter with the state-space averaging method, and after introducing an additional integral state of the output regulation error, we obtain the Takagi-Sugeno (TS) fuzzy model for the augmented system. Second, the concept of parallel distributed compensation is applied to the design of the TS fuzzy integral controller, in which the state feedback gains are obtained by solving the linear matrix inequalities (LMIs). Finally, numerical simulations of the considered design method are compared to those of the conventional method, in which a compensated error amplifier is designed for the stability of the feedback control loop.

• Nuclear Engineering and Technology
• /
• 제53권10호
• /
• pp.3127-3132
• /
• 2021

Feasibility study of burn-up analysis and monitoring using delayed fast neutrons was investigated at Missouri University of Science and Technology Reactor (MSTR). Burnt and fresh fuel elements were used to collect delayed fast neutron data for different power levels. Total reactivity varied depending on the burn-up rate of fuel elements for each core configuration. The regulating rod worth was 2.07E-04 𝚫k/k/in and 1.95E-04 𝚫k/k/in for T121 and T122 core configurations at 11 inch, respectively. Delayed fast neutron spectrum of F1 (burnt) and F16 (fresh) fuel elements were analyzed further, and a strong correlation was observed between delayed fast neutron emission and burn-up. According to the analyzed peaks in burnt and fresh fuels, reactor power dependency was observed and it was determined that delayed neutron provided more reliable results at reactor powers of 50 kW and above.

• 대한인간공학회지
• /
• 제26권4호
• /
• pp.121-125
• /
• 2007

The objective of this study is to develop short-term prevention measures for minimizing possible human error in nuclear power facilities. To accomplish this objective, a group of subject matter experts (SMEs) were formed, which is consisting of those from regulatory bodies, academia, industries and research institutes. Prevention measures were established for urgent execution in nuclear power facilities on a short-term basis. This study suggests short-term measures for reducing human error on three different areas; (1) strengthening worker management, (2) enhancing workplace environments and working methods, and (3) improving the technologies regulating human factors. Under the leadership of the Ministry of Science and Technology, these short-term measures will be pursued and implemented systematically by utility and regulatory agencies. The details of prevention measures are presented and discussed.