• Proceedings of the KIEE Conference
• /
• 2009.04a
• /
• pp.180-182
• /
• 2009

In this thesis, output voltage, current and power of solar module were classified by irradiation and module temperature from data of overall operating characteristics collected for one year in order to manage efficient photovoltaic generation system and deliver maximum power. In addition, from these data, correlations between irradiation, module temperature of photovoltaic cell and amount of power given by photovoltaic cell was Quantitatively examined to deduce optimization of the design and construction of photovoltaic generation system. The results of this thesis can be summarized as follows. As I-V characteristics according to a irradiation range of 100$\sim$900 $[W/m^2]$, voltage and current were increased with an increase in irradiation. The result is thought of as an increase in output power with increasing irradiation.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.2
• /
• pp.1-6
• /
• 2014

In-wheel driving inverter inside engine room sometimes operates in the harsh environment like high temperature of about $105^{\circ}C$. Especially, the size and power density of the inverter has become smaller and more increased. Thus, it is essential to manage the temperature of the inverter with IGBT (Insulated Gate Bipolar Transistor) switching devices for performance and endurance, because the temperature can be getting increase. In this paper, we performed the thermal flow analysis of inverter models with wave type and pin fin type cooling channels, and investigated the heat transfer characteristics of the inverter models using cooling water on channels at 8 L/min and $65^{\circ}C$. Also, we compared the thermal performance under various conditions such as coolant flow rate and layered power module structure. Therefore, we determined the feasibility of the initial inverter models and the thermal performance enhancement.

• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.615-618
• /
• 2001

In this paper, a solution of network management system for power plant was introduced. In conventional systems, power installations use serial communication or MODEM for Management. In this case, it has a weak point in distance and speed. To solve these problems, the manage system based on Ethernet was developed. In order to implement, SNMP which is standard NMS of LAN was adapted, agent board and manager program for SNMP were developed.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.3
• /
• pp.1345-1362
• /
• 2019

Most active queue management algorithms manage network congestion based on the size of the queue but ignore the network environment which makes queue size change. It seriously affects the response speed of the algorithm. In this paper, a new AQM algorithm named CT-AQM (Change Trend-Adaptive Queue Management) is proposed. CT-AQM predicts the change trend of queue size in the soon future based on the change rate of queue size and the network environment, and optimizes its dropping function. Simulation results indicate that CT-AQM scheme has a significant improvement in loss-rate and throughput.

• KEPCO Journal on Electric Power and Energy
• /
• v.4 no.1
• /
• pp.1-7
• /
• 2018

Objective signs are everywhere that the stationary energy storage market is growing up quickly. The use of distributed resources such as solar photovoltaics and electric vehicles are expanding at a rapid pace, creating technical challenges for the distribution system that will require energy storage and a new generation of software to address. This paper is intended for distribution utility managers and executives and makes the following points: ${\bullet}$ Utility-integrated (as opposed to merely grid-connected) energy storage projects represent a distinct, new wave of industry growth that is just getting underway and is required to manage distributed energy resources moving forward. ${\bullet}$ Utilities and the energy storage industry have important roles to lower risk in adopting this technology - thereby enabling this wave of growth. ${\circ}$ The industry must focus on engineering energy storage for adoption at scale - including the creation and support of software open standards -both to drive down costs and to limit technology and supplier risk for utilities. ${\circ}$ Utilities need to take a program-based, rather than a project- based, approach to this resource to best balance cost and risk as they procure and implement energy storage. By working together to drive down costs and manage risk, utilities and their suppliers can lay the energy storage foundation for a new, more digital distributed electricity system.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.848-854
• /
• 2009

Of the rapid development of modem civilization development is one of the IT industry. The Network is the root of the discrete industry. Most of the Protocol is used by LAN and the TCP / IP. Slowly in the railway operation of this Network is being applied. It also used to train and they are operated. The concept of the road, the Network TCP / IP using a non-Star structure of the Main Unit and the Bus Network is designed to structure consists of the Network. This structure is a simplified DATA. Data of complex operations is easy to feel the speed limit is. In addition, all devices must be independent to the operating system with the ability to manage the operation and stability in terms of exactly how the transmission of Data is gonna work pass. And transmission occurs in the middle of the Noise and the device is available to manage the power. Noise in the power of the railway to ensure the efficient transfer of Data is by blocking. Also, by presenting the entire system's operational safety should be guaranteed the safety of the railway.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.1
• /
• pp.135-141
• /
• 2011

Recently, the more demand of reusable energy is globally increasing, the nationwide industry of wind power plants is more thriving. However, the level of native technology for operating wind power plants falls behind advanced countries. Thus, the most of management systems for wind power plants should be imported from the advanced countries. Additionally, advanced countries, which have possessed the controllable skills and consummate operating knowhow over decades, are blockading other countries which want to enter the market of wind power plants, and lead markets. This paper designs a prototype of HMI(Human Machine Interface) system which can effectively control and manage wind power plants.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.12
• /
• pp.2221-2224
• /
• 2011

During an emergency due to a shortage of power, a load aggregator (LA) can use the demand response operation system to deploy demand response resources (DRRs) through various demand response (DR) programs. This paper introduces the demand response operation system for a load aggregator to manage various demand response resources in a smart grid environment.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.26 no.2
• /
• pp.46-54
• /
• 2003

SOC(Social Overhead Capital) projects such as road, power plant, airport or telecommunication facility construction require a large scale of cost, a long period of time and management of a number of sub-contractors. So systematic and efficient management tool in SOC projects is inevitable. Information system provides a valuable tool which can integrate and manage the large volume of information for SOC projects. This study investigates and analyzes the information system of nuclear power plant construction project. Based on this study, we can suggest the direction for designing information system for SOC projects.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.8
• /
• pp.932-940
• /
• 1999

This paper discusses the development of an interactive and graphic software for the education and training of power system operation and control, especially for students and beginners. This software has a lot of functions for users to simulate the power system operation and control with ease. These functions included in this software are followings. First, this software includes a Graphic User Interface (GUI) - which contains interactive simulation scheme, Windows dialog box, graphic representations, and graphic icons - so that users can handle the software in user-friendly environments. Second, it uses a graphic editor so that users can easily edit the one-line diagram of the power system. Third, it prepares a database system so that users can manage the power system data for simulation easily. Fourth, the application modules included in the software are the Economic Dispatch (ED) and the Automatic Load-Frequency Control (ALFC). These application modules are designed as independent modules. Using the ED module, users can understand the basic concepts of the ED with ease. And using the ALFC module, they can easily acquire the basic understanding of the response of the ALFC between the two-area systems. The proposed software is tested on both the 16 bus and the two-area sample system. The test has confirmed the functions of the developed software. It is anticipated that the software will be useful for the education and training of power system operation and control for the power engineering study at university or for the training of the beginner at power industry.