• The Korean Journal of Air & Space Law and Policy
• /
• v.24 no.1
• /
• pp.35-58
• /
• 2009

A treaty that governs the compensation on damage caused by aircraft to the third parties on surface was first adopted in Rome in 1933, but without support from the international aviation community it was replaced by another convention adopted again in Rome in 1952. Despite the increase of the compensation amount and some improvements to the old version, the Rome Convention 1952 with 49 State parties as of today is not considered universally accepted. Neither is the Montreal Protocol 1978 amending the Rome Convention 1952, with only 12 State parties excluding major aviation powers like USA, Japan, UK, and Germany. Consequently, it is mostly the local laws that apply to the compensation case of surface damage caused by the aircraft, contrary to the intention of those countries and people who involved themselves in the drafting of the early conventions on surface damage. The terrorist attacks 9/11 proved that even the strongest power in the world like the USA cannot with ease bear all the damages done to the third parties by the terrorist acts involving aircraft. Accordingly as a matter of urgency, the International Civil Aviation Organization(ICAO) picked up the matter and have it considered among member States for a few years through its Legal Committee before proposing for adoption as a new treaty in the Diplomatic Conference held in Montreal, Canada 20 April to 2 May 2009. Accordingly, two treaties based on the drafts of the Legal Committee were adopted in Montreal by consensus, one on the compensation for general risk damage caused by aircraft, the other one on compensation for damage from acts of unlawful interference involving aircraft. Both Conventions improved the old Convention/Protocol in many aspects. Deleting 'surface' in defining the damage to the third parties in the title and contents of the Conventions is the first improvement because the third party damage is not necessarily limited to surface on the soil and sea of the Earth. Thus Mid-air collision is now the new scope of application. Increasing compensation limit in big gallop is another improvement, so is the inclusion of the mental injury accompanied by bodily injury as the damage to be compensated. In fact, jurisprudence in recent years for cases of passengers in aircraft accident holds aircraft operators to be liable to such mental injuries. However, "Terror Convention" involving unlawful interference of aircraft has some unique provisions of innovation and others. While establishing the International Civil Aviation Compensation Fund to supplement, when necessary, the damages that exceed the limit to be covered by aircraft operators through insurance taking is an innovation, leaving the fate of the Convention to a State Party, implying in fact the USA, is harming its universality. Furthermore, taking into account the fact that the damage incurred by the terrorist acts, where ever it takes place targeting whichever sector or industry, are the domain of the State responsibility, imposing the burden of compensation resulting from terrorist acts in the air industry on the aircraft operators and passengers/shippers is a source of serious concern for the prospect of the Convention. This is more so when the risks of terrorist acts normally aimed at a few countries because of current international political situation are spread out to many innocent countries without quid pro quo.

• Asia Marketing Journal
• /
• v.12 no.4
• /
• pp.79-111
• /
• 2011

Digital economy has grown rapidly so that the new business area called 'Internet business' has been dramatically extended as time goes on. However, in the case of Internet business, market shares of individual companies seem to fluctuate very extremely. Thus marketing managers who operate the Internet sites have seriously observed the competition structure of the Internet business market and carefully analyzed the competitors' behavior in order to achieve their own business goals in the market. The newly created Internet business might differ from the offline ones in management styles, because it has totally different business circumstances when compared with the existing offline businesses. Thus, there should be a lot of researches for finding the solutions about what the features of Internet business are and how the management style of those Internet business companies should be changed. Most marketing literatures related to the Internet business have focused on individual business markets. Specifically, many researchers have studied the Internet portal sites and the Internet shopping mall sites, which are the most general forms of Internet business. On the other hand, this study focuses on the entire Internet business industry to understand the competitive circumstance of online market. This approach makes it possible not only to have a broader view to comprehend overall e-business industry, but also to understand the differences in competition structures among Internet business markets. We used time-series data of Internet connection rates by consumers as the basic data to figure out the competition patterns in the Internet business markets. Specifically, the data for this research was obtained from one of Internet ranking sites, 'Fian'. The Internet business ranking data is obtained based on web surfing record of some pre-selected sample group where the possibility of double-count for page-views is controlled by method of same IP check. The ranking site offers several data which are very useful for comparison and analysis of competitive sites. The Fian site divides the Internet business areas into 34 area and offers market shares of big 5 sites which are on high rank in each category daily. We collected the daily market share data about Internet sites on each area from April 22, 2008 to August 5, 2008, where some errors of data was found and 30 business area data were finally used for our research after the data purification. This study performed several empirical analyses in focusing on market shares of each site to understand the competition among sites in Internet business of Korea. We tried to perform more statistically precise analysis for looking into business fields with similar competitive structures by applying the cluster analysis to the data. The research results are as follows. First, the leading sites in each area were classified into three groups based on averages and standard deviations of daily market shares. The first group includes the sites with the lowest market shares, which give more increased convenience to consumers by offering the Internet sites as complimentary services for existing offline services. The second group includes sites with medium level of market shares, where the site users are limited to specific small group. The third group includes sites with the highest market shares, which usually require online registration in advance and have difficulty in switching to another site. Second, we analyzed the second place sites in each business area because it may help us understand the competitive power of the strongest competitor against the leading site. The second place sites in each business area were classified into four groups based on averages and standard deviations of daily market shares. The four groups are the sites showing consistent inferiority compared to the leading sites, the sites with relatively high volatility and medium level of shares, the sites with relatively low volatility and medium level of shares, the sites with relatively low volatility and high level of shares whose gaps are not big compared to the leading sites. Except 'web agency' area, these second place sites show relatively stable shares below 0.1 point of standard deviation. Third, we also classified the types of relative strength between leading sites and the second place sites by applying the cluster analysis to the gap values of market shares between two sites. They were also classified into four groups, the sites with the relatively lowest gaps even though the values of standard deviation are various, the sites with under the average level of gaps, the sites with over the average level of gaps, the sites with the relatively higher gaps and lower volatility. Then we also found that while the areas with relatively bigger gap values usually have smaller standard deviation values, the areas with very small differences between the first and the second sites have a wider range of standard deviation values. The practical and theoretical implications of this study are as follows. First, the result of this study might provide the current market participants with the useful information to understand the competitive circumstance of the market and build the effective new business strategy for the market success. Also it might be useful to help new potential companies find a new business area and set up successful competitive strategies. Second, it might help Internet marketing researchers take a macro view of the overall Internet market so that make possible to begin the new studies on overall Internet market beyond individual Internet market studies.

• Journal of Internet Computing and Services
• /
• v.14 no.5
• /
• pp.1-10
• /
• 2013

RFID(Radio Frequency Identification) system is non-contact identification technology. A basic RFID system consists of a reader, and a set of tags. RFID tags can be divided into active and passive tags. Active tags with power source allows their own operation execution and passive tags are small and low-cost. So passive tags are more suitable for distribution industry than active tags. A reader processes the information receiving from tags. RFID system achieves a fast identification of multiple tags using radio frequency. RFID systems has been applied into a variety of fields such as distribution, logistics, transportation, inventory management, access control, finance and etc. To encourage the introduction of RFID systems, several problems (price, size, power consumption, security) should be resolved. In this paper, we proposed an algorithm to significantly alleviate the collision problem caused by simultaneous responses of multiple tags. In the RFID systems, in anti-collision schemes, there are three methods: probabilistic, deterministic, and hybrid. In this paper, we introduce ALOHA-based protocol as a probabilistic method, and Tree-based protocol as a deterministic one. In Aloha-based protocols, time is divided into multiple slots. Tags randomly select their own IDs and transmit it. But Aloha-based protocol cannot guarantee that all tags are identified because they are probabilistic methods. In contrast, Tree-based protocols guarantee that a reader identifies all tags within the transmission range of the reader. In Tree-based protocols, a reader sends a query, and tags respond it with their own IDs. When a reader sends a query and two or more tags respond, a collision occurs. Then the reader makes and sends a new query. Frequent collisions make the identification performance degrade. Therefore, to identify tags quickly, it is necessary to reduce collisions efficiently. Each RFID tag has an ID of 96bit EPC(Electronic Product Code). The tags in a company or manufacturer have similar tag IDs with the same prefix. Unnecessary collisions occur while identifying multiple tags using Query Tree protocol. It results in growth of query-responses and idle time, which the identification time significantly increases. To solve this problem, Collision Tree protocol and M-ary Query Tree protocol have been proposed. However, in Collision Tree protocol and Query Tree protocol, only one bit is identified during one query-response. And, when similar tag IDs exist, M-ary Query Tree Protocol generates unnecessary query-responses. In this paper, we propose Adaptive M-ary Query Tree protocol that improves the identification performance using m-bit recognition, collision information of tag IDs, and prediction technique. We compare our proposed scheme with other Tree-based protocols under the same conditions. We show that our proposed scheme outperforms others in terms of identification time and identification efficiency.

• Journal of Intelligence and Information Systems
• /
• v.20 no.3
• /
• pp.109-131
• /
• 2014

As the demand of nuclear power plant equipment is continuously growing worldwide, the importance of handling nuclear strategic materials is also increasing. While the number of cases submitted for the exports of nuclear-power commodity and technology is dramatically increasing, preadjudication (or prescreening to be simple) of strategic materials has been done so far by experts of a long-time experience and extensive field knowledge. However, there is severe shortage of experts in this domain, not to mention that it takes a long time to develop an expert. Because human experts must manually evaluate all the documents submitted for export permission, the current practice of nuclear material export is neither time-efficient nor cost-effective. Toward alleviating the problem of relying on costly human experts only, our research proposes a new system designed to help field experts make their decisions more effectively and efficiently. The proposed system is built upon case-based reasoning, which in essence extracts key features from the existing cases, compares the features with the features of a new case, and derives a solution for the new case by referencing similar cases and their solutions. Our research proposes a framework of case-based reasoning system, designs a case-based reasoning system for the control of nuclear material exports, and evaluates the performance of alternative keyword extraction methods (full automatic, full manual, and semi-automatic). A keyword extraction method is an essential component of the case-based reasoning system as it is used to extract key features of the cases. The full automatic method was conducted using TF-IDF, which is a widely used de facto standard method for representative keyword extraction in text mining. TF (Term Frequency) is based on the frequency count of the term within a document, showing how important the term is within a document while IDF (Inverted Document Frequency) is based on the infrequency of the term within a document set, showing how uniquely the term represents the document. The results show that the semi-automatic approach, which is based on the collaboration of machine and human, is the most effective solution regardless of whether the human is a field expert or a student who majors in nuclear engineering. Moreover, we propose a new approach of computing nuclear document similarity along with a new framework of document analysis. The proposed algorithm of nuclear document similarity considers both document-to-document similarity (${\alpha}$) and document-to-nuclear system similarity (${\beta}$), in order to derive the final score (${\gamma}$) for the decision of whether the presented case is of strategic material or not. The final score (${\gamma}$) represents a document similarity between the past cases and the new case. The score is induced by not only exploiting conventional TF-IDF, but utilizing a nuclear system similarity score, which takes the context of nuclear system domain into account. Finally, the system retrieves top-3 documents stored in the case base that are considered as the most similar cases with regard to the new case, and provides them with the degree of credibility. With this final score and the credibility score, it becomes easier for a user to see which documents in the case base are more worthy of looking up so that the user can make a proper decision with relatively lower cost. The evaluation of the system has been conducted by developing a prototype and testing with field data. The system workflows and outcomes have been verified by the field experts. This research is expected to contribute the growth of knowledge service industry by proposing a new system that can effectively reduce the burden of relying on costly human experts for the export control of nuclear materials and that can be considered as a meaningful example of knowledge service application.

• Journal of Life Science
• /
• v.23 no.9
• /
• pp.1147-1154
• /
• 2013

This study was conducted to evaluate the antioxidation activity of Jeju crossbred horse (Jeju native horse ${\times}$ thoroughbred) leg bone extracts (HLBE) and its enzyme hydrolysates by determination of 1,1-diphenyl-2picryl-hydrazyl (DPPH), 2,2-azino-bis(3-ethylbenzo thiazoline-6-sulfonic acid) diammonium salt (ABTS) radical scavenging activity, ferric reducing/antioxidant power (FRAP), and oxygen radical absorbance capacity (ORAC). HLBE was extracted with hot water for 24 hr and lyophilized. The lyophilized HLBE was hydrolyzed using multifect PR6L (MP), pepsin (PS), and a pepsin and pancreatin mixture (PSPC) for 4 hr at 60, 50, and $50^{\circ}C$, respectively. The hydrolysates were separated by a molecular weight of 3 kDa more or less. When the yield of HLBE was 100%, the yield of hydrolysates less than 3 kDa of MP, PS, and PSPC was 10.86, 3.26, and 8.00%, respectively. Enzyme hydrolysates with low molecular weight less than 3 kDa in MP and PSPC showed significantly higher DPPH, ABTS radical scavenging activity, and ORAC compared to HLBE and its hydrolysates with more than 3 kDa. However, the FRAP of the hydrolysates less than 3 kDa in PS was significantly higher than in MP. These results suggest that low molecular weight enzyme hydrolysates less than 3 kDa have more powerful antioxidation activity, especially when they are hydrolyzed by MP and PSPC rather than PS. Therefore, low molecular weight enzyme hydrolysates of HLBE hydrolyzed with MP and PSPC have significant potential as antioxidants in the food industry. Further in vivo studies are required to support the antioxidation activities of the hydrolysates in vitro.

• Journal of the East Asian Society of Dietary Life
• /
• v.25 no.3
• /
• pp.451-459
• /
• 2015

Raw-red bean (RR) should be boiled in hot water, and only boiled-red bean (BR) has been used in the food industry. In the course of development of functional food using red- bean (Phaseolus radiatus L), hot- water extracts (HWEs) of RR and BR were prepared, respectively and their components and various biological activities were compared. The extraction yield at $100^{\circ}C$ of RR (16.2%) was higher than that of BR (14.8%), and contents of total polyphenols, total flavonoids and reducing sugars of HWE of RR were 2.5-fold, 2.1-fold and 1.5-fold higher than those of HWE of BR. In anti-oxidation activity assay, scavenging activities against DPPH anion and ABTS cation as well as reducing power of RR was higher than those of BR. The results suggest that the anti-oxidant compounds in red bean might be heat-liable or discarded during boiling in hot-water as a cooking drip. Unexpectedly, nitrite scavenging activity was stronger in HWE of BR than RR. In anti-microbial activity assay, HWE of RR ($500{\mu}g/disc$) showed growth inhibition activity against gram-positive bacteria, whereas HWE of BR did not show any activity against any tested bacteria and fungi. Assay of in-vitro anti-diabetes and anti-thrombosis activities, which were previously reported in ethanol extract of red-bean, revealed that HWEs of RR and BR did not show significant activities against ${\alpha}$-amylase, ${\alpha}$-glucosidase, thrombin, prothrombin, or blood coagulation factors. Our results suggest that the anti-oxidation, anti-diabetes and anti-thrombosis activities of HWEs of RR and BR were lower than those of ethanol extracts of red bean, and bioactive substances in RR were destroyed during boiling or discarded after boiling. Further research on suitable boiling and re-use of cooking drip of red bean is necessary.

• Cartoon and Animation Studies
• /
• s.37
• /
• pp.393-411
• /
• 2014

The volume of world market for serious game in year 2015 is expected to be about 9.6 trillion, and the volume of educational serious game market is expected to surpass half of the whole serious game market. In Korea, the development of game for educational purpose has dominated around the education enterprises since late 90s. In 2008, 'Serious Game Forum' was founded led by the Ministry of Culture, Sports, and Tourism with experts from many fields in the society and there were progressing of making policies and plans for potential development of the serious game industry, but the effects were not successful than expected. In 2012, the Ministry of Education, Science, and Technology announced commercialization policy of digital textbook by 2015 and the serious game for educational purpose got attention again. Then, the serious game market became more vigorous with the dispersion of smart devices.13) As a result, the serious games on the smart devices or interlocking between the online and smart devices became an important issue in development rather than the online only serious games. Math field has international competitive power through export in the educational serious game market which takes more than half of the serious game market. Therefore, developing serious game for math education is a good area to raise competitiveness in domestic and international game industries. Moreover, it has no received preferences from students and parents although it has high potential for positive change of individuals and society. The reason is that students recognize it as educational content rather than a game and they avoid it, while parents recognize it as game but not an education. This phenomenon happens because the game elements and educational elements are not properly mixed but focused only on education or emphasized only the fun factors of game when it was developed. Therefore, the purpose of this research is to suggest a direction of developing serious games effectively combining with elementary math for elementary students to get interested in math while playing games. The research will analyze the current elementary math textbooks and find contents which may be combined with the game genre that elementary students enjoy playing these days. This research received advice from serious game developers and math education expert group to reflect the inclination of elementary school students, and respond to the demands from parents and educational institutions, and suggested a direction of developing serious games for effective math education.

• Journal of Korean Academy of Nursing Administration
• /
• v.5 no.3
• /
• pp.477-500
• /
• 1999

Korean labor market has showed remarkable change of the increase in the amount of unemployment and contingent employment since IMF bailout agreement. There is a theoretical position to explain this increase in contingent employment at hospitals with the notion of flexibility. The high flexibility of employment due to the increase of contingent employees is becoming very important part in new business strategy of hospitals. The types of contingent employment of the nurse are part-time employment temporary employment, fixed-term employment, and internship which was introduced in early 1999. Recently, Korean health care industry managers have paid attention to the customer oriented service, rationalization of business administration, service quality control so that they can adjust their business to outer environment. Especially their efforts concentrate on the wage reduction through efficient and scientific control of man power because wage shares about 40% of total cost. This dissertation aims at verifying the phenomena of the contingent employment of the nurse and analyzing the related factors and problems. To rephrase these aims in ordinal: First, verifying the phenomena of contingent employment of the nurse. Second, verifying the problems of that phenomena. Third, analyzing the related factors of the contingent employment of the nurse. To accomplish these research goals, a statistical survey was executed. in which 384 questionnaires-66 for manager nurses, 318 for contingent nurses - were given to nurses working at 66 hospitals-which have at least 100 beds-in Seoul. Among them, 187 questionnaires-38 from manager nurses, 149 from contingent nurses'- 'were returned. Then, the data coded and submitted to T-test, $X^2$ -test, variance analysis(ANOVA), correlation analysis, multiple regression analysis, Logistic Regression with SAS program. The research results of the contingent nurses are followings: 1. The average career term at the present hospital 8.4 months: duty-on days per month are 24.2 days: working time per day is 7.9 hours. These results showed little difference from regular nurses. 2. Their wage level is about 70% of regular nurses except for internship nurses whose wage level is 41% of regular nurses. To break down the wage composition, part-time nurses and internship nurses get few allowance and bonus. And contingent nurses get very low level of additional pay except for fixed-term nurses who are under similar condition of employment to regular nurses. These results show that hospital managers are trying to reduce the labor cost not only through the direct way of wage reduction but through differential treatment of bonus, retirement allowance, and other additional pay. 3. The problem of contingent employment: low level of pay; high level of turn-over rate: weakening of union; low level of working condition: heavy burden of work; inhuman treatment. The contingent nurses consider these problems more seriously than manager nurses do. What manager nurses regard problematic is the absence of feeling-belonged and responsibility of the contingent nurses. 4. The factors strongly related with the rate of the number of contingent nurses for the number of regular nurses; gross turn-over nurses; average in-patients per day; staring wage of graduate from professional college: the type of hospital ownership; the number of beds; the gap between gross newcomer nurses and gross turn-over nurses. The factors related with their gross wage per month; the number of beds; applying of health insurance; applying of industrial casualty insurance; applying of yearly-paid leave; the type of hospital ownership; average out-patients per day; gross turn-over nurses. The meaningful factors which make difference by employment type: monthly-paid leave; physiological leave. The logistic regression analysis using these two factors shows that monthly-paid leave is related with the type of hospital ownership; the number of beds; average out-patient per day, and physiological leave is related with the gross newcomer nurses; gross turn-over nurses; the number of beds.

• Korea Journal of Hospital Management
• /
• v.9 no.1
• /
• pp.66-94
• /
• 2004

The objective of this study is to examine how to maximize the efficiency of hospital management by minimizing the unit cost of hospital operation. For this purpose, this paper proposes to develop a model of the profit maximization based on the cost minimization dictum using the statistical tools of arriving at the maximum likelihood values. The preliminary survey data are collected from the annual statistics and their analyses published by Korea Health Industry Development Institute and Korean Hospital Association. The maximum likelihood value statistical analyses are conducted from the information on the cost (function) of each of 36 hospitals selected by the random stratified sampling method according to the size and location (urban or rural) of hospitals. We believe that, although the size of sample is relatively small, because of the sampling method used and the high response rate, the power of estimation of the results of the statistical analyses of the sample hospitals is acceptable. The conceptual framework of analyses is adopted from the various models of the determinants of hospital costs used by the previous studies. According to this framework, the study postulates that the unit cost of hospital operation is determined by the size, scope of service, technology (production function) as measured by capacity utilization, labor capital ratio and labor input-mix variables, and by exogeneous variables. The variables to represent the above cost determinants are selected by using the step-wise regression so that only the statistically significant variables may be utilized in analyzing how these variables impact on the hospital unit cost. The results of the analyses show that the models of hospital cost determinants adopted are well chosen. The various models analyzed have the (goodness of fit) overall determination (R2) which all turned out to be significant, regardless of the variables put in to represent the cost determinants. Specifically, the size and scope of service, no matter how it is measured, i. e., number of admissions per bed, number of ambulatory visits per bed, adjusted inpatient days and adjusted outpatients, have overall effects of reducing the hospital unit costs as measured by the cost per admission, per inpatient day, or office visit implying the existence of the economy of scale in the hospital operation. Thirdly, the technology used in operating a hospital has turned out to have its ramifications on the hospital unit cost similar to those postulated in the static theory of the firm. For example, the capacity utilization as represented by the inpatient days per employee tuned out to have statistically significant negative impacts on the unit cost of hospital operation, while payroll expenses per inpatient cost has a positive effect. The input-mix of hospital operation, as represented by the ratio of the number of doctor, nurse or medical staff per general employee, supports the known thesis that the specialized manpower costs more than the general employees. The labor/capital ratio as represented by the employees per 100 beds is shown to have a positive effect on the cost as expected. As for the exogeneous variable's impacts on the cost, when this variable is represented by the percent of urban 100 population at the location where the hospital is located, the regression analysis shows that the hospitals located in the urban area have a higher cost than those in the rural area. Finally, the case study of the sample hospitals offers a specific information to hospital administrators about how they share in terms of the cost they are incurring in comparison to other hospitals. For example, if his/her hospital is of small size and located in a city, he/she can compare the various costs of his/her hospital operation with those of other similar hospitals. Therefore, he/she may be able to find the reasons why the cost of his/her hospital operation has a higher or lower cost than other similar hospitals in what factors of the hospital cost determinants.

• Archives of design research
• /
• v.16 no.4
• /
• pp.185-196
• /
• 2003

The demand for an environment-friendly transportation system, equipped with low energy consumption, and low-or zero-pollution has been on the increase since the beginning of the World Trade Organization era. Simultaneously, the consistent growth of high-speed tram technology, combined with market share, has sparked a fierce competition among technologically-advanced countries like France, Germany, and Japan in an effort to keep the lead in high-speed train technology via extensive Research and development(R＆D) expenses. These countries are leaders in the race to implement the next-generation transportation system, build intercontinental rail way networks and export the high-speed train as a major industry commodity. The need to develop our own(Korean) 'high-speed train' technology and its core system technology layouts including original technology serves a few objectives: They boost the national competitive edge; they develop an environmental friendly rail road system that can cope with globalization and minimize the social and economic losses created by the growing traffic-congested delivery costs, environment pollution, and public discomforts. In turn, the 'G7 Project-Development of High Speed Railway Technology' held between 1996 and 2002 for a six-year period was focused on designing a domestic train capable of traveling at a speed of 350km/h combined and led to the actual implementation of engineering and producing the '2000 high-speed train:' This paper summarizes and introduces one of the G7 Projects-specifically, the design segment achievement within the development of train system engineering technology. It is true that the design aspect of the Korean domestic railway system program as a whole was lacking when compared with the advanced railroad countries whose early phase of train design emphasized the design aspect. However, having allowed the active participation of expert designers in the early phase of train design in the current project has led to a new era of domestic train development and the implementation of a way to meet demand flexibly with newly designed trains. The idea of a high-speed train in Korea and its design concept is well-conceived: a faster, more pleasant, and silent based Korean high-speed train that facilitates a new travel culture. A Korean-type of high-speed train is acknowledged by passengers who travel in such trains. The Korean high-speed prototype train has been born, combining aerodynamic air-cushioned design, which is the embodiment of Korean original design of forehead of power car minimized aerodynamic resistance using a curved car body profile, and the improvement of the interior design with ergonomics and the accommodation of the vestibule area through the study of passenger behavior and social culture that is based on the general passenger car.