• Journal of the Korean earth science society
• /
• v.41 no.2
• /
• pp.95-110
• /
• 2020

Comparisons between two different surface temperatures from high-resolution ECMWF ReAnalysis 5 (ERA5) and Automated Synoptic Observing System (ASOS) observations were performed to investigate the reliability of the new reanalysis data over South Korea. As ERA5 has been recently produced and provided to the public, it will be highly used in various research fields. The analysis period in this study is limited to 1999-2018 because regularly recorded hourly data have been provided for 61 ASOS stations since 1999. Topographic characteristics of the 61 ASOS locations are classified as inland, coastal, and mountain based on Digital Elevation Model (DEM) data. The spatial distributions of whole period time-averaged temperatures for ASOS and ERA5 were similar without significant differences in their values. Scatter plots between ASOS and ERA5 for three different periods of yearlong, summer, and winter confirmed the characteristics of seasonal variability, also shown in the time-series of monthly error probability density functions (PDFs). Statistical indices NMB, RMSE, R, and IOA were adopted to quantify the temperature differences, which showed no significant differences in all indices, as R and IOA were all close to 0.99. In particular, the daily mean temperature differences based on 1-hour-averaged temperature had a smaller error than the classical daily mean temperature differences, showing a higher correlation between the two data. To check if the complex topography inside one ERA5 grid cell is related to the temperature differences, the kurtosis and skewness values of 90-m DEM PDFs in a ERA5 grid cell were compared to the one-year period amplitude among those of the power spectrum in the time-series of monthly temperature error PDFs at each station, showing positive correlations. The results account for the topographic effect as one of the largest possible drivers of the difference between ASOS and ERA5.

• Management & Information Systems Review
• /
• v.36 no.1
• /
• pp.115-141
• /
• 2017

This study is to find the key factors of the Internet of Things for development in public sector. In previous studies, it is said that Internet of Things can work digital system without human operation and gives a lot of outputs(information) users. Generally, people are a subject of operating digital system in traditional way, while people are an object on the internet of things. In other words, it is possible to work digital system with only networking from things to things. After all, it is reported that these advantages of the Internet of Things make possible to reduce social costs significantly in public sector. However, despite the strengths of the Internet of Things, there is a specific user acceptance of the technology factor for the Internet of Things rarely. It means that developing of the Internet of Things only focuses on the final purpose. If the focus on development meet this purpose, the user is ignored for the specific reason that using a technique. As a result of this, many users gradually decrease the continuous using of the Internet of Things. Thus, in this study, we need to find what critical factors should reflect to the Internet of Things in public sector. To find this result, there is no choice to use Technology Acceptance Model(TAM). Many researchers have proved that Technology Acceptance Model is valid through the four process in model introduction, confirmation, expansion and refinement from 1986 to 2003. The results of this study showed that the result explanatory power of Internet of Things in public sector is the most important factor affecting only perceived social usefulness and ease of use. Finally, it can be seen that the user has a positive attitude toward use, which has a positive effect on the intention to use continuously. The implications of this study are summarized as follows: When the public Internet of Things service is provided, it means that the user can easily understand the result, and when the person and the object communicate the result to each other, they should be able to communicate with each other. This means that a lot of user effort is needed to understand the outcome of the public Internet of Things being provided.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.38 no.2
• /
• pp.106-111
• /
• 2018

This study was conducted to investigate the relationship between changes of rumen microflora and bloat in Jersey cow. Jersey cows (control age: 42 months, control weight: 558kg; treatment age: 29 months, treatment weight 507kg) were fed on the basis of dairy feeding management at dairy science division in National Institute of Animal Science. The change of microbial population in rumen was analyzed by using next generation sequencing (NGS) technologies due to metabolic disease. The diversity of Ruminococcus bromii, Bifidobacterium pseudolongum, Bifidobacterium merycicum and Butyrivibrio fibrisolvens known as major starch fermenting bacteria was increased more than 36-fold in bloated Jersey, while cellulolytic bacteria community such as Fibrobacter succinogenes, Ruminococcus albus and Ruminococcus flavefaciens was increased more than 12-fold in non-bloated Jersey. The proportion of bacteroidetes and firmicutes was 33.4% and 39.6% in non-bloated Jersey's rumen, while bacteroidetes and firmicutes were 24.9% and 55.1% in bloated Jersey's. In conclusion, the change of rumen microbial community, in particular the increase in starch fermenting bacteria, might have an effect to occur the bloat in Jersey cow.

• Archives of design research
• /
• v.19 no.1 s.63
• /
• pp.293-302
• /
• 2006

clay cups with handles made in studios in Korea and the United States were selected and analyzed. The shape of cup were fixed to ensure proper comparison between handle size of the cup and position. The variable factors were the thickness of the handle, the number of fingers required to hold the cup, the relationship between the handle's shape and the position of its attachment to the cup, the effect of the handle's setter, the change in shape of the handle's thickness, and the relationship between the cup's weight center and handle. Preference test were designed and tested to the users, and the results were analyzed. The results showed that to make a comfortable handle, it is important to incorporate the shape of the resting hand in the design of the handle. Specifically, the design should be such that the cup can be held comfortably. This is possible if the weight of the cup is spread evenly when several fingers are inside the handle's curve and if such factors as the hand size, the curve of the fingers, and the position that best controls the cup's weight center are carefully considered. At this time, if there is a setter for the thumb, a cup of the same weight can be lifted more lightly. In the design of such a cup, the oval line is drawn by extending the cup's handle toward the direction of the cup's body. If the cup's weight center is located on the oval line, the cup's handle may be said to be effective. In such a case, the nearer the handle is to the cup's body weight center, the less power is needed to lift the cup efficiently. Our test results can be applied as a powerful tools in design and manufacturing cups with handle in terms of artistry and functionality.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.1
• /
• pp.17-25
• /
• 2013

This study was performed to investigate the effects of the hot water extract of red garlic (RG) and RG-composites on fecal lipid levels and hepatic antioxidant enzyme activity in rats fed a high fat-cholesterol diet. Three different types of RG-composites prepared: RG and green tea (RGT), RG and dietary fiber (RGF), and RG, green tea, and dietary fiber (RGTF). Rats were divided into six groups: the control, the group fed a high fat-cholesterol diet (HFC), the RG-supplemented group (HRG), the RGT supplemented group (HRGT), the RGF supplemented group (HRGF), and the RGTF supplemented with HFC group (HRGTF). The antioxidant activity of these composites was tested, in vitro. The DPPH radical scavenging activity was higher RGT and RGTF than RG. ABTs radical scavenging activity of RGT was similar to RGTF. Their activities were significantly higher than RG. The reducing power was similar to their radical scavenging activities. Total lipid levels in the liver and triglyceride levels in the heart were lower in the groups fed RG-composites than the HRG group. Fecal total lipid level was higher in the HRGF and HRGTF groups than the HRG group after 4 weeks diet supplementation during 4 weeks. Lipid peroxide content was reduced to anywhere between 6.2% and 12.1% in the groups fed RG-composites, compared to the HFC group. Antioxidant activity was significantly higher in the groups fed RG-composites than the HFC group. Hepatic SOD activity was higher in the groups fed RG-composites than the HRG group. The HRGT group in catalase activity, and the HRGT and HRGTF groups in GSH-px activity were increased significantly compared to the HFC group. Hepatic UDPGT activity was increased significantly in the HRGT and HRGTF groups to the HFC group, as well. These results indicate that antioxidant activities of the RG-composites were related to the decrease of lipid levels by increasing the fecal excretion and enhancement of hepatic antioxidant enzyme activity in rats fed a high fat-cholesterol diet.

• Journal of Life Science
• /
• v.24 no.11
• /
• pp.1180-1186
• /
• 2014

Autophagy, the lysosomal degradation pathway, is an intracellular recycling system that is necessary for the metabolic benefits of exercise and for producing lasting beneficial effects of exercise in various diseases. However, the most recent studies have only examined the effect of a single bout of exercise or resistance exercise on autophagic responses. To determine the differential effects of acute and chronic exercise on the expression of autophagy-related genes in D. melanogaster, white-eyed mutant D. melanogaster were assigned randomly to four groups: control, acute exercise, 2 hr chronic exercise, and 3 hr chronic exercise. The flies were exercised using a mechanized platform known as the Power Tower. Our results revealed that a single bout of exercise resulted in increased mRNA levels of the Atg8a gene (~20%, p<0.05). However, Atg1 and Atg6 mRNA expression were not induced by acute exercise. Transcript levels of Atg6 (~29%, p<0.05) related to the nucleation of autophagosomes were significantly induced by 2 hr of chronic exercise. However, this chronic exercise was not enough to increase Atg1 and Atg8a mRNA expression. On the other hand, 3 hr of exercise for 7 days significantly increased Atg1, Atg6, and Atg8a gene expression-about 57%, 37%, and 71%, respectively (p<0.05). These results suggest that a single bout of exercise is not enough to induce full activation of selected autophagy-related genes in D. melanogaster. Our results demonstrated that chronic regular exercise induced autophagy-related gene expression, suggesting that chronic regular exercise training might be required to activate autophagic responses important for producing beneficial effects of exercise in various diseases.

• The Korean Journal of Food And Nutrition
• /
• v.30 no.2
• /
• pp.218-225
• /
• 2017

This study was carried out to compare the cooked and antioxidant characteristics with of cooked mixed grain rice with an addition rate (0, 5, 10, 15 and 20%) of proso millet and various cooking methods. Mixed grain rice with added proso millet was cooked by general and high pressure cooking methods with and without fermented alcohol. All pasting characteristics, except for breakdown viscosity, decreased with increasing the amounts of proso millet. Water binding capacity and swelling power significantly decreased when increasing the amounts of proso millet, however the water solubility index significantly increased. The palatability characteristics of rice with added proso millet showed similar results to rice without proso millet. Total polyphenol contents of rice with 20% proso millet and fermented alcohol added, cooked by general and high pressure cooking methods, were $184.33{\pm}2.69$ and $179.80{\pm}5.22{\mu}g\;GAE/g$, respectively. Total flavonoid contents increased as amounts of proso millet increased. DPPH radical scavenging activities with and without proso millet added were 4.20~7.50 and 2.97~5.19 mg TE/100 g, respectively. ABTS radical scavenging activities with and without proso millet added were 14.36~27.92 and 14.07~15.83 mg TE/100 g, respectively. In this study, cooked and antioxidant characteristics of cooked mixed grain rice with added proso millet were expected to be used as basic data for manufactured processed products.

• Korean Journal of Soil Science and Fertilizer
• /
• v.32 no.3
• /
• pp.279-284
• /
• 1999

Fly ash is the fine ash particles that are flying out of chimney of the thermoelectric power plant where coals are used as fuel. There are two kinds of fly ashes from anthracite and bituminous coal. By scanning electron microscope(SEM) morphological feature of fly ash was confirmed to the exact spherical particles with the diameter variation from the fine to the largest about $50{\mu}m$(mainly silty particle). Surface of anthracite ash particle was very smooth but that of bituminous was somewhat coarse. To find the utilization of fly ash for improving soil permeability, soils of 4 kinds of different texture, clay, clay loam, sandy clay loam and sand mere applied with 7 levels of fly ash: 0, 10, 20, 40, 60, 80, 100%(w/w) and their saturated hydraulic conductivity(Ks) were determined at each application by constant head method. In clay soil with low water permeability, Ks value was increased about 10 times from $10^{-8}$ to $10^{-7}m\;s^{-1}$ level with application of 10% fly ash and it was slightly increased with increasing fly ash application from 40 to 80%. In clay loam Ks value was about $10^{-7}m\;s^{-1}$ level and its value was not influenced by the fly ash application. In sandy clay loam with relatively high permeability, Ks value was decreased about 10 times from $10^{-5}$ to $10^{-6}m\;s^{-1}$ level with application of 10% fly ash and also decreased about 50 times from $10^{-5}$ to $5.0{\times}10^{-7}m\;s^{-1}$ with application of more than 20% fly ash. In sand with very high permeability, Ks value was decreased about 10 times from $10^{-4}$ to $10^{-5}m\;s^{-1}$ level with application of 10% fly ash and also decreased about 100 times from $10^{-4}$ to $10^{-6}m\;s^{-1}$ level with application of 20% fly ash and continuously decreased about 500 times from $10^{-4}$ to $5.0{\times}10^{-7}m\;s^{-1}$ level with application of more than 40% fly ash. In conclusion by fly ash application saturated hydraulic conductivity was increased in clay soil, on the contrary it was decreased in sandy soils. Fly ash may be used as a material for amelioration of soil permeability.

• Geophysics and Geophysical Exploration
• /
• v.13 no.3
• /
• pp.268-276
• /
• 2010

Earthquake Hazard Mitigation Law was activated into force on March 2009. By the law, the obligation to monitor the effect of earthquake on the facilities was extended to many organizations such as gas company and local governments. Based on the estimation of National Emergency Management Agency (NEMA), the number of free-surface acceleration stations would be expanded to more than 400. The advent of internet protocol and the more simplified operation have allowed the quick and easy installation of seismic stations. In addition, the dynamic range of seismic instruments has been continuously improved enough to evaluate damage intensity and to alert alarm directly for earthquake hazard mitigation. For direct visualization of damage intensity and area, Real Time Intensity COlor Mapping (RTICOM) is explained in detail. RTICOM would be used to retrieve the essential information for damage evaluation, Peak Ground Acceleration (PGA). Destructive earthquake damage is usually due to surface waves which just follow S wave. The peak amplitude of surface wave would be pre-estimated from the amplitude and frequency content of first arrival P wave. Earthquake Early Warning (EEW) system is conventionally defined to estimate local magnitude from P wave. The status of EEW is reviewed and the application of EEW to Odesan earthquake is exampled with ShakeMap in order to make clear its appearance. In the sense of rapidity, the earthquake announcement of Korea Meteorological Agency (KMA) might be dramatically improved by the adaption of EEW. In order to realize hazard mitigation, EEW should be applied to the local crucial facilities such as nuclear power plants and fragile semi-conduct plant. The distributed EEW is introduced with the application example of Uljin earthquake. Not only Nation-wide but also locally distributed EEW applications, all relevant information is needed to be shared in real time. The plan of extension of Korea Integrated Seismic System (KISS) is briefly explained in order to future cooperation of data sharing and utilization.

• 대한공업교육학회지
• /
• v.34 no.2
• /
• pp.128-160
• /
• 2009

Narratively I have described interactions between two teachers performing an introduction to the engineering class with various situations such as place, teacher, student and subject. I have specifically illuminated a three-dimensional narrative inquiry space embracing the culture of the university, the college of engineering and the ABEEK(Accreditation Board of Engineering Education of Korea)program. The result of the study is as follows: First, in order to stimulate the students' motivation, the teachers have to make not only their class PowerPoint slides match the size of the classroom, but the content of the slides must be condensed with core concepts. They also should utilized some video clips to empower students' interest in the subject within their classrooms. Second, the teachers should do various class activities in the classroom. Instead of spending most of the class time with his/her explanation, it would be advantageous for the teachers to allow the students to perform a task in class. Third, the teachers should ask their students about assignments which are helping students' understanding of the subject and planning of their future. Lastly, the teachers need to design the mid-term and the final tests inducing the students' motivation. Those tests also must test students' creativity and insight of the subject. Thus, the test should consist of an interpretive exercise and an essay type of item thus reducing the multiple choice types of items. There are several limitations to the study. First it is difficult to generalize what we found here because it is a case study. Second, we could not study in depth the effect of the interaction between the two teachers who were performing the introduction to the engineering course during the academic semester. Third, this study just probed into the difficulties of teaching the course. Hence, we have to understand more by focusing on each issue such as adapting to a new learning environment as a student from abroad, a practical experience boosting the students' interest in the introduction to the engineering course, also a practical experience on process based learning-versus result based learning, and an effective management of the student team presentation etc.