• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.423-426
• /
• 2005

A new chip on glass(COG) technique by making use of a high power diode laser for LCD driver IC packaging of LCD has been developed. A laser joining technology of the connection of IC chip to glass panel has several advantages over conventional method such as hot plate joining: shorter process time, high reliability of joining, and better fur fine pitch joining. The reach time to cure temperature of ACF in laser joining is within 1 second. In this study, results show that the total process time of joining is reduced by halves than that of conventional method. The adhesion strength is mainly 100-250 N/cm. It is confirmed that the COG technology using high power diode laser joining can be applied to advanced LCDs with a fine pitch.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.428-430
• /
• 2008

We demonstrated high power efficiency and long lifetime for organic light-emitting diode (OLED) using a new electron transport material (ETM-1). A power efficiency of the device with ETM-1 was improved compared to a standard device using tris(8-hydroxy-quinolinate)aluminum ($Alq_3$). Moreover, the lifetime was 4 times longer than the standard device.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1999년도 전력전자학술대회 논문집
• /
• pp.346-349
• /
• 1999

This paper proposes a new series-connected diode rectifier which draws sinusoidal input currents. The proposed rectifier system is configured by adding an auxiliary circuit to the conventional 12-pulse series-connected diode rectifier and employing a current injection technique. A low kVA (0.02Po (PU) ) active current source injects a triangular current results in near sinusoidal input current from the utility with less than 1% THD. The resulting system is suitable for high voltage and high power applications. Experimental results is provided from a 220VA rectifier system.

• 대한기계학회논문집B
• /
• 제28권1호
• /
• pp.66-71
• /
• 2004

Airborne contaminant particles are intruded into optical disk drive(ODD) due to the flow caused by disk rotation and can be adhered to objective lens, which causes read/write errors. Such a phenomenon can be a serious problem for high-density storage devices. The purpose of this paper is to understand the effect of particle contamination of objective lens in a CD-ROM drive on laser diode power and photo diode RF signal. The measurements of laser power and readout RF signal were carried out by using a laser power meter and a time interval analyzer, respectively. The parameters for estimating a readout-signal' distortion were its jitter and amplitude. Alumina(Al$_2$O$_3$) particles were used as test dust particles. The results show that the failure for data access happened as the degree of lens contamination was greater than 20％.

• Journal of Power Electronics
• /
• 제19권1호
• /
• pp.288-295
• /
• 2019

Rectifiers are widely used in industrial applications. Although detailed models of rectifiers are usually used to evaluate their performance, they are complex and time-consuming. Therefore, the Average Value Model (AVM) has been introduced to meet the demand for a simple and accurate model. This type of rectifier modeling can be used to simplify the simulations of large systems. The AVM of diode rectifiers has been an area of interest for many electrical engineers. However, healthy diode rectifiers are only considered for average value modeling. By contrast, faults occur frequently on diodes, which eventually cause the diodes to open-circuit. Therefore, it is essential to model bridge rectifiers under this faulty condition. Indeed, conventional AVMs are not appropriate or accurate for faulty rectifiers. In addition, they are significantly different in modeling. In this paper, a novel application of the parametric average value of a three-phase line-commutated rectifier is proposed in which one diode of the rectifier is considered open-circuited. In order to evaluate the proposed AVM, it is compared with experimental and simulation results for the application of a brushless synchronous generator field. The results clearly demonstrate the accuracy of the proposed model.

• 전력전자학회논문지
• /
• 제27권2호
• /
• pp.85-91
• /
• 2022

This study proposes a high efficiency bridgeless Power Factor Correction (PFC) converter with improved common mode noise characteristics. Conventional PFC has limitations due to low efficiency and enlarged heat sink from considerable conduction loss of bridge diode. By applying a Common Mode (CM) coupled inductor, the proposed bridgeless PFC converter generates less conduction loss as only a small magnetizing current of the CM coupled inductor flows through the input diode, thereby reducing or removing heat sink. The input diode is alternately conducted every half cycle of 60 Hz AC input voltage while a negative node of AC input voltage is always connected to the ground, thus improving common mode noise characteristics. With the aim to improve switching loss and reverse recovery of output diode, the proposed circuit employs Critical Conduction Mode (CrM) operation and it features a simple Zero Current Detection (ZCD) circuit for the CrM. In addition, the input current sensing is possible with the shunt resistor instead of the expensive current sensor. Experimental results through 480 W prototype are presented to verify the validity of the proposed circuit.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2011년도 전력전자학술대회
• /
• pp.222-223
• /
• 2011

최근 저전력 소모와 얇은 두께, 무 수은, 다양한 색 표현력, 빠른 응답 속도 등의 다양한 장점을 가진 LED(Light Emitting Diode)를 광원으로 이용하는 LCD(Liquid Crystal Display) TV가 큰 주목을 받고 있다. 이러한 LCD TV의 화면을 균등한 휘도로 표현하기 위해 기존의 구동회로는 다 채널의 LED를 정전류로 제어하는 DC/DC 컨버터가 채널마다 각각 적용되었고, 이는 원가 상승 및 효율 저하의 원인이 되었다. 이를 해결하기 위하여 본 논문에서는 각 LED 채널에 적용되는 DC/DC 컨버터 없이 트랜스포머, 커패시터, 다이오드를 이용하여 모든 LED 채널의 정전류 제어가 가능한 저가격형 구동회로를 제안한다. 이는 전력변환 효율과 전력밀도를 획기적으로 개선할 수 있고 수동소자만을 사용하므로 높은 신뢰성을 확보할 수 있다. 본 논문에서는 제안된 회로에 대한 이론적 해석과 실험을 통해 제안 회로의 타당성을 검증한다.

• Current Optics and Photonics
• /
• 제4권2호
• /
• pp.127-133
• /
• 2020

We successfully constructed a passively Q-switched Yb:YAG laser ignitor pumped by a diode laser with low power and long pulse width. To the best of our knowledge, this is the first study to achieve a quasi-MW output power from an optimized Q-switch Yb:YAG laser ignitor by using a pumping diode laser module emitting at under a power of 23 W. The output pulse energy of our optimized laser is 0.98 mJ enclosed in a 1.06 ns pulse width, corresponding to a peak power of 0.92 MW.

• 대한전자공학회논문지
• /
• 제17권6호
• /
• pp.72-77
• /
• 1980

본 논문에서는 optical feedback prebias control 회로상의 몇가지 일반적인 문제점들을 분석하고 이에 수반되는 회로 조정의 문제를 해결하기 위하여 LD simulation 회로를 제시하였다. 온도 시험에서 LD의 총 light power를 feedback loop에 사용하였을 때 0℃부터 36℃까지의 사이에서 1.5%의 light power 감소를 보였고 star coupler를 beam splitter로 1%정도를 분지, feedback loop에 사용한 결과 transmitter로서 좋은 전송 특성을 가짐을 관찰하였다.

• Current Optics and Photonics
• /
• 제2권5호
• /
• pp.443-447
• /
• 2018

We propose a diode-pumped cesium laser using frequency locking of a pump laser that can effectively increase the maximum output power of the cesium laser. We simultaneously monitored the absorption spectrum of cesium and the laser output power, and the frequency of pump laser was locked at the center of the $D_2$ absorption line of the cesium atom to obtain an effective gain enhancement. Using this scheme, we have achieved output power increase of ~0.1 W compared to when frequency locking was not applied. Furthermore, by optimizing the temperature of the cesium cell and the reflectivity of the output coupler, we successfully achieved an output power of 1.4 W using the pump power of 2.9 W, providing a slope efficiency of 61.5% and optical-to-optical efficiency of 49%.