DOI QR코드

DOI QR Code

High Efficiency Bridgeless Power Factor Correction Converter With Improved Common Mode Noise Characteristics

우수한 공통 모드 노이즈 특성을 가진 브릿지 다이오드가 없는 고효율 PFC 컨버터

  • Received : 2021.10.07
  • Accepted : 2021.11.15
  • Published : 2022.04.20

Abstract

This study proposes a high efficiency bridgeless Power Factor Correction (PFC) converter with improved common mode noise characteristics. Conventional PFC has limitations due to low efficiency and enlarged heat sink from considerable conduction loss of bridge diode. By applying a Common Mode (CM) coupled inductor, the proposed bridgeless PFC converter generates less conduction loss as only a small magnetizing current of the CM coupled inductor flows through the input diode, thereby reducing or removing heat sink. The input diode is alternately conducted every half cycle of 60 Hz AC input voltage while a negative node of AC input voltage is always connected to the ground, thus improving common mode noise characteristics. With the aim to improve switching loss and reverse recovery of output diode, the proposed circuit employs Critical Conduction Mode (CrM) operation and it features a simple Zero Current Detection (ZCD) circuit for the CrM. In addition, the input current sensing is possible with the shunt resistor instead of the expensive current sensor. Experimental results through 480 W prototype are presented to verify the validity of the proposed circuit.

Keywords

Acknowledgement

본 연구는 삼성전자의 지원을 받아 수행한 결과임. 이 논문은 2021년도 정부(산업통상자원부)의 재원으로 한국에너지기술평가원의 지원을 받아 수행된 연구임. (20212020800020, 통합형 최적설계 플랫폼 기반 초고효율 전력변환시스템 개발)

References

  1. L. Huber, Y. Jang, and M. M. Jovanovic, "Performance evaluation of bridgeless PFC boost rectifiers," IEEE Transactions on Power Electronics, Vol. 23, No. 3, pp. 1381-1390, May 2008. https://doi.org/10.1109/TPEL.2008.921107
  2. M. Reddig, W. Zhou, and M. Schlenk, "True bridgeless PFC-stages with advanced current measuring circuit," in 2011 IEEE 33rd International Telecommunications Energy Conference, pp. 1-6, 2011.
  3. P. Kong, S. Wang, and F. C. Lee, "Common mode EMI noise suppression in bridgeless boost PFC converter," in 21st Annual IEEE Applied Power Electronics Conference and Exposition, pp. 929-935, 2007.
  4. Q. Li, M. A. E. Andersen, and O. C. Thomsen, "Conduction losses and common mode EMI analysis on bridgeless power factor correction," in 2009 International Conference on Power Electronics and Drive Systems, pp. 1255-1260, 2009.
  5. A. Marcos-Pastor, E. Vidal-Idiarte, A. Cid-Pastor, and L. Martinez-Salamero, "Loss-free resistor-based power factor correction using a semi-bridgeless boost rectifier in sliding-mode control," IEEE Transactions on Power Electronics, Vol. 30, No. 10, pp. 5842-5853, Oct. 2015. https://doi.org/10.1109/TPEL.2014.2369431
  6. F. Musavi, W. Eberle, and W. G. Dunford, "A phase-shifted gating technique with simplified current sensing for the semi-bridgeless AC-DC converter," IEEE Transactions on Vehicular Technology, Vol. 62, No. 4, pp. 1568-1576, May 2013. https://doi.org/10.1109/TVT.2012.2231709
  7. K. Shi, M. Shoyama, and S. Tomioka, "Common mode noise reduction in totem-pole bridgeless PFC converter," in 2014 International Power Electronics and Application Conference and Exposition, pp. 705-709, 2014.
  8. Y. Liu, X. Huang, Y. Dou, M. Li, O. Ziwei, and M. A. E. Andersen, "Adaptive dead time control for ZVS GaN based CRM Totem Pole PFC," in 2020 IEEE 9th International Power Electronics and Motion Control Conference, pp. 438-442, 2020.
  9. J. Zhang, L. Li, and X. Zhang, "Hybrid modulation interleaving scheme for CRM totem-pole bridgeless PFC rectifier," in 2020 15th IEEE Conference on Industrial Electronics and Applications, pp. 805-810, 2020.
  10. G. Cao and H. Kim, "A novel critical-conduction-mode bridgeless interleaved boost PFC rectifier," in 2014 International Power Electronics Conference, pp. 2587-2592, 2014.