• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.179-179
• /
• 2016

A radio-frequency (RF) Inductively Coupled Plasma (ICP) torch system was used for boron-nitride nano-tube (BNNT) synthesis. Because of electrodeless plasma generation, no electrode pollution and effective heating transfer during nano-material synthesis can be realized. For stable plasma generation, argon and nitrogen gases were injected with 60 kW grid power in the difference pressure from 200 Torr to 630 Torr. Varying hydrogen gas flow rate from 0 to 20 slpm, the electrical and optical plasma properties were investigated. Through the spectroscopic analysis of atomic argon line, hydrogen line and nitrogen molecular band, we investigated the plasma electron excitation temperature, gas temperature and electron density. Based on the plasma characterization, we performed the synthesis of BNNT by inserting 0.5~1 um hexagonal-boron nitride (h-BN) powder into the plasma. We analysis the structure characterization of BNNT by SEM (Scanning Electron Microscopy) and TEM (Transmission Electron Microscopy), also grasp the ingredient of BNNT by EELS (Electron Energy Loss Spectroscopy) and Raman spectroscopy. We treated bundles of BNNT with the atmospheric pressure plasma, so that we grow the surface morphology in the water attachment of BNNT. We reduce the advancing contact angle to purity bundles of BNNT.

• 한국재료학회지
• /
• 제24권4호
• /
• pp.214-220
• /
• 2014

In this research, a precipitation method was used to synthesize ${\beta}-Ga_2O_3$ powders with various particle morphologies and sizes under varying precipitation conditions, such as gallium nitrate concentration, pH, and aging temperature, using ammonium hydroxide and ammonium carbonate as precipitants. The obtained powders were characterized in detail by XRD, SEM, FT-IR, and TG-DSC. From the TG-DSC result, GaOOH phase was transformed to ${\beta}-Ga_2O_3$ at around $742^{\circ}C$, and weight loss percent was about 14 % when $NH_4OH$ was used as a precipitant. Also, ${\beta}-Ga_2O_3$ formed at $749^{\circ}C$ and weight loss percent was about 15 % when $(NH)_2CO_3$ was used as a precipitant. XRD results showed that the obtained $Ga_2O_3$ had pure monoclinic phase in both cases. When $(NH)_2CO_3$ was used as a precipitant, the particle shape changed and became irregular. The range of particle size was about $500nm-4{\mu}m$ based on various concentrations of gallium nitrate solution with $NH_4OH$. The particle size was increased from $1-2{\mu}m$ to $3-4{\mu}m$ and particle shape was changed from spherical to bar type by increasing aging temperature over $80^{\circ}C$.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제39권4호
• /
• pp.156-160
• /
• 2013

Objectives: Interest in bone graft material has increased with regard to restoration in cases of bone defect around the implant. Autogenous tooth bone graft material was developed and commercialized in 2008. In this study, we evaluated the results of vertical and horizontal ridge augmentation with autogenous tooth bone graft material. Materials and Methods: This study targeted patients who had vertical or horizontal ridge augmentation using AutoBT from March 2009 to April 2010. We evaluated the age and gender of the subject patients, implant stability, adjunctive surgery, additional bone graft material and barrier membrane, post-operative complication, implant survival rate, and crestal bone loss. Results: We performed vertical and horizontal ridge augmentation using powder- or block-type autogenous tooth bone graft material, and implant placement was performed on nine patients (male: 7, female: 2). The average age of patients was $49.88{\pm}12.98$ years, and the post-operative follow-up period was $35{\pm}5.31$ months. Post-operative complications included wound dehiscence (one case), hematoma (one case), and implant osseointegration failure (one case; survival rate: 96%); however, there were no complications related to bone graft material, such as infection. Average marginal bone loss after one-year loading was $0.12{\pm}0.19$ mm. Therefore, excellent clinical results can be said to have been obtained. Conclusion: Excellent clinical results can be said to have been obtained with vertical and horizontal ridge augmentation using autogenous tooth bone graft material.

• 한국축산식품학회지
• /
• 제37권3호
• /
• pp.456-463
• /
• 2017

The aim of this study was to identify the optimal and superior type of natural calcium for replacing phosphate in cooked ground pork products. To achieve this, 0.5% eggshell calcium (ESC), oyster shell calcium (OSC), marine algae calcium (MAC), or milk calcium (MC) was added to ground pork meat products. The effect of this substitution was studied by comparing the substituted products with products containing 0.3% phosphate blend (control). ESC was considered an ideal phosphate replacer for minimizing the cooking loss, which likely resulted from the increase in the pH of the product. Among the other natural calcium types, OSC treatment did not cause a significant increase in pH, but it lowered the cooking loss. CIE $L^*$ values were higher (p<0.05) in products treated with OSC or MC than the control, and lowest (p<0.05) in the products with ESC. However, products with ESC had higher (p<0.05) CIE $a^*$ and CIE $b^*$ values than the control and products treated with other powders. Compared to the control, products treated with ESC and OSC had similar substitution effects on the textural properties of the products. Therefore, the results of this study suggested that the combined use of ESC and OSC could be a potentially effective method for replacing synthetic phosphate in ground pork products.

• Advances in materials Research
• /
• 제2권3호
• /
• pp.141-153
• /
• 2013

Nanocrystalline Barium niobate ($BaNbO_3$) has been synthesized by a novel auto-igniting combustion technique. The X-Ray diffraction studies reveals that $BaNbO_3$ posses a cubic structure with lattice constant $a=4.071{\AA}$. Phase purity and structure of the nano powder are further examined using Fourier-Transform Infrared and Raman spectroscopy. The average particle size of the as prepared nano particles from the Transmission Electron Microscopy is 20 nm. The UV-Vis absorption spectra of the samples are recorded and the calculated average optical band gap is 3.74eV. The sample is sintered at an optimized temperature of $1425^{\circ}C$ for 2h and attained nearly 98% of the theoretical density. The morphology of the sintered pellet is studied with Scanning Electron Microscopy. The dielectric constant and loss factor of a well-sintered $BaNbO_3$ at 5MHz sample is found to be 32.92 and $8.09{\times}10^{-4}$ respectively, at room temperature. The temperature coefficient of dielectric constant was $-179pp/^{\circ}C$. The high dielectric constant, low loss and negative temperature coefficient of dielectric constant makes it a potential candidate for temperature sensitive dielectric applications.

• 펄프종이기술
• /
• 제47권5호
• /
• pp.98-103
• /
• 2015

The reduction of the energy consumption in papermaking process become more important issue because of the regulation of green house gas (GHG) emission. Since more than half of energy for papermaking process is consumed during drying process, the increase of the drying efficiency would be very important solution for saving energy and reduction of GHG emission. The improvement of drying efficiency could be very difficult for the liner board mill because the liner board are usually made of recycled paper, OCC (old corrugated container). The short fiber and fines originated the OCC lead to compact sheet structure and delay the water flow out during wet pressing process and drying process. The application of lignocellulose spacer could provide more loose wet sheet structure and result in the higher drainage rate and the improved drying efficiency. In this study, the effects of the application of lignocellulose spacer to the liner board mill were evaluated based on the mill trial. In order to overcome the common disadvantage of the spacer, the loss of strength properties, the spacer was pretreated with amphoteric polyelectrolyte during mill trial. The results showed the application of pretreated spacer improved the drying efficiency by reducing steam consumption. And the loss in the strength properties by the spacer could be supplemented by the pretreatment.

• Journal of the Korean Wood Science and Technology
• /
• 제16권4호
• /
• pp.3-9
• /
• 1988

Infrared (IR) spectroscopic techniques for the analysis of wood samples and the absorbance spectra of solid woods were presented. KBr pellets were prepared by throughly mixing approximately 300 mg of dried KBr and 1 mg of finely milled wood powder extracted with ethanol-cyclohexane previously. This mixture was made into a transparent disc by means of a pellet-making die (10 ton/$cm^2$ for 10 min). This IR techniques were applied for the analysis of archaeological wood samples. The most notable difference in the IR spectra between the recent and the archaeological waterlogged woods is that the absorption band centered at $1,730cm^{-1}$ was significantly diminished in the waterlogged ones. Total loss of absorption in $1,730cm^{-1}$ might be mainly due to the result of hemicellulose degradation. Another feature indicated by IR spectral comparision are that the degraded waterlogged wood samples showed 1) the increased intensity of the 1,600, 1,500 and $1,270cm^{-1}$ due to the residual lignin and the increased intensity at 1,470 and $1,425cm^{-1}$ due to the degradation of hemicellulose and 2) to the emergence of single band around $1,050cm^{-1}$ instead of three bands at 1,110, 1,060 and $1,040cm^{-1}$ in recent wood due to the degradation of cellulose crystalline. It was revealed from the IR examinations that the first change of wood in the waterlogged situation was the lysis of hemicellulose and the second the lysis of cellulose. It was also suggested that IR spectroscopy could serve a fast method for the investigation on the chemical characteristics of archaeological wood samples.

• 한국축산식품학회지
• /
• 제37권1호
• /
• pp.52-61
• /
• 2017

The objective of this study was to investigate the effects of different concentrations of WSP (wheat sprout powder) and ISP (isolated soy protein) on the quality of breakfast sausage. Treatments were formulated as follows: Control, T1 (2.0% ISP), T2 (1.5% ISP + 0.5% WSP), T3 (1.0% ISP + 1.0% WSP), T4 (0.5% ISP + 1.5% WSP) and T5 (2.0% WSP). The treatments were analyzed for color, pH, cooking loss, emulsion stability, protein solubility, viscosity, texture properties and sensory evaluation. Lightness and redness were reduced and yellowness was increased as increased level of WSP, due to the dark green color of WSP (p<0.05). The pH values of all samples were affected by WSP which has lower pH (p<0.05). The emulsion stability and cooking loss of treatments were improved with increasing level of WSP (p<0.05). The protein solubility, viscosity and overall texture properties of the sausage indicated significant differences in relation to the level of WSP and ISP (p<0.05). The sensory evaluation indicated that the greatest flavor and overall acceptability in sausage was achieved at WSP 1% combination with ISP 1% (T3) (p<0.05). Therefore, these results indicate that breakfast sausage containing 1% WSP and 1% ISP is the optimal formulation, taking into consideration the overall physico-chemical properties and sensory evaluation.

• 한국식품저장유통학회지
• /
• 제5권4호
• /
• pp.331-334
• /
• 1998

기능성 MA필름을 생산하여 이를 골판지 상자의 내부에 첨합시킨 FC상자의 활용가능성을 조사하고자 골판지 상자와 기능성 MA필름대를 골판지 상자 내부에 첨합시킨 FC포장구와 LDPE 및 기능성필름과 대조구로 골판지 상자만으로 포도를 포장하여 25 C에 저장하여 품질변화를 조사한 결과, FC 상자와 LDPE와 CE포장구는 대조구 보다는 중량감소율이 현저히 낮았으며 비타민C의 함량도 33% 높게 유지되고 있었다. 산도와 환원당 함량은 포장구들간에는 큰차이가 없었다. 외관 및 부패를 조사한 결과 대조구에 비해 개발포장구에서 품질이 더 높게 유지되고 있어 FC 포장재를 포도 포장용 상자로 활용가능성이 확인되었다.

• Journal of the Korean Wood Science and Technology
• /
• 제48권1호
• /
• pp.50-60
• /
• 2020

Fungi are wood-decaying organisms, and this is an important trait that should be considered in wood utilization. When fungi attack wood, it decreases the quality of the wood. The use of metal screws has become an important part of woodworking. The ability of fungi to decay wood and damage metal screws that are embedded into wood is varied. In this study, eight fungal species were evaluated with respect to their ability to decay Parashorea smythiesii and P. tomentella wood. In addition, the effect of fungi on corroding metal screws was determined using the Kolle flask method. The evaluation showed that the fungal species Schizophyllum commune, Pycnoporus sanguineus, and Polyporus arcularius were highly capable of decaying Parashorea spp. woods. The greatest wood weight loss occurred with the heartwood of P. tomentella exposed to S. commune. Based on the classification of wood resistance against fungal attack, the two Parashorea spp. were classified as moderately resistant woods (class III). Schizophyllum commune was classified as highly capable of decaying wood that was embedded with metal screws and was highly capable of corroding metal screws placed in fungi-culture media. The greatest weight of rust powder formed because of screw corrosion was obtained from screw-embedded wood exposed to S. commune. Additionally, the most severe corrosion of metal screws that were embedded into woods was caused by the activities of P. arcularius. Moreover, the average weight loss of screw-embedded wood was greater than that of unscrewed wood.