• Journal of Dairy Science and Biotechnology
• /
• v.37 no.4
• /
• pp.213-222
• /
• 2019

Milk and dairy products are the high value foods for the elderly population. In particular, fermented milk is the best source of calcium for people in the specific age group of over 79 years. It provides a good source of protein. Regular exercise and active lifestyle are recommended to slow down the muscle loss. However, exercising without proper nutrient intake is simply not sufficient at this age. Milk and dairy products provide the iron and protein content required for effective exercise-assisted growth. Milk nutrients have the advantage of being produced in various food forms, such as liquid, semi-solid, and powder types. Fat-soluble vitamins such as retinol and vitamin K can be encapsulated using various technologies for milk and dairy products. Using the encapsulation method, spray drying and fluidized-bed coating have been used for adding the micro-nutrients to the food. Microencapsulation technology is being applied in case of the fermented dairy products too. In particular, various wall materials are being developed to enhance the viability of probiotics. In the near future, advanced high-efficiency technologies that can effectively nourish the dairy products with nutrients will be developed to produce targeted high-nutrition value food for the elderly.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.9
• /
• pp.1051-1057
• /
• 2008

In this paper, we analyzed the characteristics of the EM wave absorber which was fabricated by using flake sendust (soft metal magnetic powder). The flake sendust was made of 3 different granularity by attrition mill. First, we have fabricated 3 kind of EM wave absorbers using the flake sendust and CPE(Chlorinated Polyethylene) and measured the S-parameters of the EM wave absorber. The complex relative permittivity and permeability were calculated from the measured data and the variations according to a change of granularity were researched. As a result, it was confirmed that the EM wave absorber using flake sendust with the $140{\mu}m$ average granularity has outstanding absorption ability in high frequency range(C band) for the reduction of eddy current loss(increase of permeability) and the increase of space charge polarization(increase of permittivity).

• Journal of the East Asian Society of Dietary Life
• /
• v.15 no.3
• /
• pp.264-270
• /
• 2005

This study was performed to evaluate the effect of red-yeast-rice on blood lipids and also to investigated the relation of blood lipids, bone related hormones, and bone mineral density in overiectomized rats. Forty female rats (body weight $210\pm5$g) were divided into two groups. The rats in the first group were ovariectomized which the others received sham operation (SHAM). And then each rat group was further divided into control diet $(casein\;20\%)$ and red-yeast-rice powder supplemented $(0.1\%)$ diet group. All rats were fed on experimental diet and deionized water ad libitum for 9 weeks. Bone mineral density (BMD) and bone mineral content (BMC) were measured using PIXImus in spine and femur. Bone formation and bone resorption were measured by serum osteocalcin and urinary deoxypyridinoline (DPD) crosslinks value. Serum growth hormone, IGF-1 and calcitonin were analyzed using radioimmunoassay kits. The red-yeast-rice group had significantly lower the blood triglyceride concentration and had lower the blood total cholesterol concentration than casein group did in ovariectomized rats. And the red-yeast-rice group than casein group in ovariectomized rats. The red-yeast-rice group had significantly lower the atherogenic index than control group within the ovariectomized groups. In the experimental rats, serum total cholesterol concentration was negatively correlated with femur BMC and crosslink value. Crosslink value was negatively correlated with spine BMC and IGF-1. Osteocalcin concentration was negatively correlated with crosslink value. Growth hormone was negatively correlated with crosslink value and positively correlated with spine BMC. The findings of this study suggest that red-yeast-rices are beneficial for blood lipid in ovariectomized rats. And when considering a population-based public health approach to lowering cholesterol and bone loss, and preventing coronary heart disease and osteoporosis, the red-yeast-rice dietary supplement could provide a new approach for the maintenance of healthier cholesterol and bone.

• Food Science of Animal Resources
• /
• v.37 no.6
• /
• pp.840-846
• /
• 2017

We investigated the physicochemical and sensorial properties of hamburger patties made with three different defatted soybean flour (DSF) preparations which differed in particle size. Coarse ($Dv_{50}=259.3{\pm}0.6{\mu}m$), fine ($Dv_{50}=91.5{\pm}0.5{\mu}m$), and superfine ($Dv_{50}=3.7{\pm}0.2{\mu}m$) DSF were prepared by conventional milling and sifting, followed by jet milling at 7 bars. Hamburger patties containing 5% of each DSF were prepared for a property analysis. The hamburger patties made with 5% superfine DSF showed the lowest cooking loss among the treatment groups (p<0.05). The patties with superfine DSF also retained the texture profile values of the control patties in terms of hardness, gumminess, springiness, and chewiness, while the addition of coarse and fine DSF increased the hardness and chewiness significantly (p<0.05). The sensorial results of quantitative descriptive analysis (QDA) indicate that the patties containing superfine DSF were softer and tenderer than the controls (p<0.05). Although the overall acceptability of the patties made with coarse and fine DSF was poor, the overall acceptability of the superfine DSF patty was the same as that of the control patty. These results suggest that superfine DSF is an excellent food material that can supply dietary fiber, while maintaining the physical characteristics and texture of hamburger patty.

• Journal of the Korean Ceramic Society
• /
• v.45 no.7
• /
• pp.411-417
• /
• 2008

Aerosol Deposition Method (ADM) is a novel technique to grow ceramic thick films with high density and nano-crystal structure at room temperature. $^{1,2)}$ For these unique advantages of ADM, it would be applied to the fabrication process of 3-D integration ceramic modules effectively. However, it is critical to control the properties of starting powders, because a film formation through ADM is achieved by impaction and consolidation of starting powders on the substrates. We fabricated alumina thick films by ADM for the application to integral substrates for RF modules. When the as-received alumina powders were used as a starting material without any treatments, it was observed that the dielectric properties of as-deposited alumina films, such as relative permittivity and loss tangent, showed high dependency on the frequency. In this study, some techniques of powder pre-treatments to improve the dielectric properties of alumina thick films will be shown and the effects of starting powders on the properties of AD films will be discussed.

• Journal of the Korea Institute of Building Construction
• /
• v.4 no.2
• /
• pp.129-136
• /
• 2004

High fluidity concrete(HFC) requires high dosage of superplasticizer to acquire sufficient fluidity, and high contents of fine powder and viscosity enhancing admixtures to resist segregation. The use of high amount of admixtures to make HFC at batcher plant in ready mixed concrete company is one of the reasons to raise the manufacturing cost of HFC. For this reason, new type of manufacturing method of HFC are described using both flowing concrete method and segregation reducing superplasticizer(SRS) in order to gain economical profit and offer the convenience for quality control.. As dosage of melamine based superplasticizer increases, it shows that fluidity and bleeding increase, while air contents and ratio of segregation resistance decrease. It also shows that addition of viscosity agent into superplasticizer reduce bleeding and improve segregation resistance of concrete. Dosage of AE agent into superplasticizer containing viscosity agent recovers loss of air contents during flowing procedure. Combination of proper contents of superplasticizer, viscosity agent and AE agent make possible to develope segregation reducing type superplasticizer. Compressive strength of high fluidity concrete applying flowing method with it is higher than that of base concrete. No differences of compressive strength between compacting methods are found. For the estimation of construction cost of high fluidity concreting using segregation reducing type superplasicizer, under same strength levels, although material cost of high fluidity concrete is somewhat higher than that of plain concrete due to segregation reducing type superplasticizer cost, labor cost and equipment cost of high fluidity concrete is cheaper than that of plain concrete. However, based on the strength differences, high fluidity concrete shows lower material cost, labor cost and equipment cost than that of plain concrete due to decreasing in size of member and re-bar caused by high strength development of concrete.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.4
• /
• pp.662-669
• /
• 2020

Objective: This study was conducted to evaluate the effect of red glasswort (RG) (Salicornia herbacea L.) curing on the physicochemical, textural and sensory properties of cooked pork loin ham (M. longissimus thoracis et lumborum). Methods: All treatments were cured with different salt and RG powder levels. RG0 treatment was prepared with only 4% NaCl (w/w) as a control, and RG25, 3% NaCl:1% RG (w/w); RG50, 2% NaCl:2% RG (w/w); RG75, 1% NaCl:3% RG (w/w); RG100, 0% NaCl:4% RG (w/w) treatments were prepared sequentially. All samples were individually vacuum packaged in polyethylene bags and stored for 7 d at 3℃±1℃. Results: The results showed that as the rate of RG substitution increased, pH value, redness, myofibrillar protein solubility, and myofibrillar fragmentation index increased (p<0.05), but salt concentration and shear force decreased (p<0.05). However, there were no significant differences in cooking loss and moisture content. In terms of sensory evaluation, RG100 exhibited higher scores in tenderness and juiciness than RG0 (p<0.05). Conclusion: The partial substitution of NaCl by RG could improve the physicochemical properties, textural and sensory characteristics of cooked pork loin. Therefore, it is suggested that RG as a natural salt replacer could be an effective ingredient for developing low-sodium cured hams.

• Polymer(Korea)
• /
• v.24 no.6
• /
• pp.829-836
• /
• 2000

In order to recyle the FRP waste from SMC bathtubs and rock-crush sludge obtained as a byproduct of stones, the composite consisting of the FRP and rock-crush sludge and the unsaturated polyester matrix resin were prepared. To enhance the interfacial bonding force between the reinforcements and the matrix resin, the rock-crush sludge was treated with silane coupling agent, ${\gamma}$-methacryloxypropyltrimethoxysilane (${\gamma}$-MPS) and their mechanical properties and interface phenomena were examined. The flexural modulus of the composite containing 10 wt% rock-crush powder treated with 3 wt% silane coupling agent showed the maximum value. And also the initial thermal degradation temperature of composites were in the range of 352~359$^{\circ}C$. From these results, we observed that the weight loss of composites was almost constant regardless of the concentration of silane coupling agent. It is confirmed that the interface of the composites containing filler treated with ${\gamma}$-MPS was improved in that there were no pull-out phenomena between the reinforcement and matrix resin.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.345-345
• /
• 2011

MgO는 암염구조를 가진 전형적인 이온 결합성 화합물로서 7.8eV의 띠틈을 갖고 흡습성이 강하다. 면 방전 구조 PDP에서 MgO 보호막은 면 방전으로 인한 유전층의 식각을 보호하고 2차 전자 방출을 통해 방전 전압을 낮추는 역할을 한다. 하지만 MgO 보호막은 증착시 흡수된 수분이 제거되어야 하고, 방전 특성 개선 및 방전 효율 향상을 위해 가공 처리에 관한 연구가 진행 되어야 한다. 본 연구는 MgO 보호막의 전자적 특성의 변화를 알아보기 위해 $O_2$ 분위기에서 전자빔 증착법을 이용해 MgO Powder를 사용하여 시료를 제작하였다. 표면에 흡착된 수분제거로 인한 특성 변화를 알아보기 위해 진공 챔버내에서 시료를 $500^{\circ}C{\sim}550^{\circ}C$의 열처리를 실시한 후 XPS(X-ray Photoelectron Spectroscopy), REELS(Reflection Electron Energy Loss Spectroscopy), UPS(Ultraviolet photoelectron Spectroscopy)를 이용하여 전자적 특성을 연구하였다. XPS 측정결과 시료의 열처리를 통해 C1s spectrum의 O-C=O(289eV) binding energy가 없어져 박막에 흡착된 불순물이 제거 되었으며 O1s spectrum에서 Hydroxides가 감소하고 530.0eV의 MgO 결합에너지쪽으로 커짐으로써 박막의 구조를 확인할 수 있었다. 그리고 $O^2$ 분위기에서 성장시킨 MgO 박막 기판을 열처리 후 REELS를 이용해 띠틈을 얻어보면 Ep=500eV에서 띠틈이 6.77eV, Ep=1500eV에서 띠틈이 7.33eV로 각각 측정되었다. Ep=500eV의 REELS 스펙트럼으로부터 산소 결함에 의한 표면 F Center는 4.22eV로 확인되었다.

• Macromolecular Research
• /
• v.12 no.4
• /
• pp.399-406
• /
• 2004

Glass-like carbon precursors shrink significantly during curing and carbonization, which leads to crack formation and bending. Cured furan resin powder and ethanol were added to furan resin to diminish the weight loss, to suppress the shrinkage and bending, and to readily release the gases evolved during polymerization and curing. Curing and carbonization were controlled by pressure and slow heating to avoid damage to the samples. The effect of the filler and ethanol on the fabrication process was examined by measuring the properties of the glass-like carbon, such as the specific gravity, bending strength, electrical resistivity, and microstructural change. The specific gravities of the filler-added glass-like carbons were higher than those of the ethanol-added samples because of the formation of macropores from the vaporization of ethanol during the curing and polymerization processes. Although the ethanol-added glass-like carbons exhibited lower bending strengths after carbonization than did the filler-added samples, the opposite result was observed after aging at 2,600$^{\circ}C$. We found that the macropores created from ethanol were contracted and removed upon heat treatment. The electrical resistivity of the glass-like carbon aged at 2,600$^{\circ}C$ was lower than those of the samples carbonized at 1,000$^{\circ}C$. We attribute this phenomenon to the fact that aging at high temperature led to well-developed microstructures, the removal of macropores, and the reduction of the surface area.