• 한국세라믹학회지
• /
• 제41권5호
• /
• pp.388-394
• /
• 2004

균일하게 혼합된 LiNO$_3$와 Co 금속분말을 알곤 분위기 하에서 SHS 공정으로 리튬이차전지용 양극활물질인 LiCoO$_2$분말을 합성하였다. 여러 가지 반응변수에 따라 제조된 분말의 특성과 전기화학적 특성평가를 수행하였는데, 반응온도 및 속도와 제조된 분말의 입도는 각각 Li/Co 몰비와 시료의 냉각속도 변화로 제어 가능하였다. Li/Co 몰비가 1.05일 때 최대방전용량인 145 mAh/g을 나타냈으며, 10회 충ㆍ방전 실험 후 6.4%의 낮은 용량감소를 갖는 비교적 안정된 cycling 특성을 보였다.

• 한국전기전자재료학회논문지
• /
• 제26권9호
• /
• pp.662-668
• /
• 2013

Reported here are results of the mechanical and electrical properties of both of intact and thermally degraded epoxy-coated copper busducts that are made by fluidized bed process. To elucidate and compare the properties mentioned above, electrical breakdown by thermal and water aging, v-t characteristic, bending test, impact test and cross cut test are carried out. Although the performance of electrical and mechanical properties are gradually decreased in increasing the severe conditions such as temperature, aging time, and so forth, sample C has a better performance in both mechanical and electrical properties.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.791-794
• /
• 2008

MRE(Magneto-rheological Elastomer) is a material which shows reversible and various modulus in magnetic field. Comparing to conventional rubber vibration isolator, MREs are able to absorb broader frequency range of vibration. These characteristic phenomena result from the orientation of magnetic particle (i.e., chain-like formation) in rubber matrix. In this study, NR was used as a matrix in order to manufacture MREs. Magnetic reactive powder(MRP), having rapid magnetic reaction, was selected as a magnetic particle to give magnetic field reactive modulus. The mechanical properties of manufactured MREs were measured without the application of magnetic field. The results showed that the tensile property and resilience were decreased while the hardness was increased with the addition of CIP. The analysis of MR effect was carried out by FFT analyzer with various magnetic flux. As the addition of MRP and magnetic flux increased, increment of MR effect was observed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.288-291
• /
• 2014

MRE(Magneto-rheological Elastomer) is a material which shows reversible and various modulus in magnetic field. Comparing to conventional rubber vibration isolator, MREs are able to absorb broader frequency range of vibration. These characteristic phenomena result from the orientation of magnetic particle (i.e., chain-like formation) in rubber matrix. In this study, Silicon was used as a matrix in order to manufacture MREs. Magnetic reactive powder(MRP), having rapid magnetic reaction, was selected as a magnetic particle to give magnetic field reactive modulus. The mechanical properties of manufactured MREs were measured with the application of magnetic field. The analysis of MR effect was carried out by FFT analyzer with various induced magnetic field. As the addition of CIP and induced magnetic field intensity increased, increment of MR effect was observed.

• 한국분말재료학회지
• /
• 제17권2호
• /
• pp.123-129
• /
• 2010

The fabrication of interconnect from titanium powders and $TiN_x$ powders is investigated. Corrosion-resistant titanium and $TiN_x$ are used as reinforcement in order to reveal high heat and corrosion resistance at the elevated temperature. We fabricated the plates for interconnect reinforced with $TiN_x$ by mixing titanium powders with 10 wt.% of nano-sized $TiN_x$. Spark Plasma Sintering (SPS) was chosen for the sintering of these composites. The plate made of titanium powders and $TiN_x$ powders demonstrates higher corrosion resistance than that of the plate of titanium powders alone. The physical properties of specimens were analyzed by performing hardness test and biaxial strength test. The electrochemical properties, such as corrosion resistance and hydrogen permeability at high temperature, were also investigated. The microstructures of the specimens were investigated by FESEM and profiles of chemical compositions were analyzed by EDX.

• 한국분말재료학회지
• /
• 제24권5호
• /
• pp.400-405
• /
• 2017

The addition of a large amount of alloying elements reduces the compactibility and increases the compacting pressure, thereby shortening the life of the compacting die and increasing the process cost of commercial PM steel. In this study, the characteristic changes of Fe-Mo-P, Fe-Mn-P, and Fe-Mo-Mn-P alloys are investigated according to the Si contents to replace the expensive elements, such as Ni. All compacts with different Si contents are fabricated with the same green densities of 7.0 and $7.2g/cm^3$. The transverse rupture strength (TRS) and sintered density are measured using the specimens obtained through the sintering process. The sintered density tends to decrease, whereas the TRS increases as the Si content increases. The TRS of the sintered specimen compacted with $7.2g/cm^3$ is twice as high as that compacted with $7.0g/cm^3$.

• 한국재료학회지
• /
• 제7권12호
• /
• pp.1027-1032
• /
• 1997

본 연구에서는 용사용WC-17%Co 복합분말을 분무건조법으로 제조하고 열처리 온도(85$0^{\circ}C$, 100$0^{\circ}C$, 115$0^{\circ}C$, 130$0^{\circ}C$)에 따른 조립분말의 미세구조, 입도분포, 유동도, 및 결정상변화를 고찰하였다. 분무건조상태의 입형은 구형이었으며, 입도분포, 평균입자크기, 유동성은 각각 20.6-51.7$\mu\textrm{m}$, 27.2$\mu\textrm{m}$, 0.26 sec/g 이었다. 열처리에 의하여 조립분말은 치밀화되어 130$0^{\circ}C$ 열처리 후에는 입도분포와 평균입자크기가 각 각 6.9-37.9$\mu\textrm{m}$과 17.8$\mu\textrm{m}$로 감소하였으며, 유동성은 0.12 sec/g로 향상되었다. 열처리중에 WC와 Co의 상화확산에 의하여 Co$_{6}$W$_{6}$C및 Co$_{3}$W$_{3}$C이 생성되었으며, 두 상이 나타나는 임계온도는 115$0^{\circ}C$이었다.

• 한국수소및신에너지학회논문집
• /
• 제16권4호
• /
• pp.372-378
• /
• 2005

Ni/YSZ ($Y_2O_3$-stabilized $ZrO_2$) composite powder for a cathode material in high temperature electrolysis(HTE) was synthesized by a mechanical alloying method with Ni and YSZ powder. Microstructure of the composite and cell thickness for HTE reaction has been analyzed with various techniques of XRD, SEM to investigate effects of fabrication conditions. Employing the composite material, furthermore, the unit cell for HTE has been studied to evolve hydrogen from water. XRD patterns showed that the composites after wet mechanical alloying were composed of respective nano-sized crystalline Ni and YSZ. While ethanol as additive for mechanical alloying increased to $20\;{\mu}m$ of average particle size of the composites, alpha-terpineol effectively decreased to sub-micro size of that. This study has been found out the evolution of hydrogen by HTE reaction employing the fabricated cathode material, showing 1.4 ml/min of $H_2$ generation rate as increasing $20\;{\mu}m$ of cathode thickness.

• 펄프종이기술
• /
• 제44권4호
• /
• pp.43-50
• /
• 2012

The crystallinity index is an important characteristic of cellulose. The crystallinity value is different depending on the adopted instrument. In this study, we determined a crystallinity index of cotton and wood celluloses using wide-angle X-ray scattering (WAXS), powder X-ray diffractometer (PXRD), and cross polarization/magic angle spinning solid-state $^{13}C$ nuclear magnetic resonance spectroscopy (CP/MAS solid-state $^{13}C$ NMR). The specimen was prepared in forms of powder, sheet and pallet. With the comparison of the obtained crystallinity indices of the cellulose, the effects of the analysis instrument, the sample preparation and analysis method were investigated. Among three instruments, the crystallinity indices by PXRD and NMR had a good relationship and reproducibility, and WAXS gave the crystallinity index with poor reproducibility. In the case of analysis methods of crystallinity indices, the Segal method showed higher value than that of the Ruland-Vonk method. We expect that this study would be applicable to evaluate the crystallinity index of various cellulose materials with accuracy and reproducibility.

• Nuclear Engineering and Technology
• /
• 제51권2호
• /
• pp.495-500
• /
• 2019

When a new fuel is developed, various mechanical properties are absolutely necessary for a safety analysis of the fuel for the licensing and prediction of its mechanical behavior during operation and accident conditions. In this paper, a mechanically equivalent surrogate plate of U-Mo dispersion fuel is presented using tungsten, substitute material of U-Mo particle. A surrogate plate, composed of tungsten/aluminum dispersion meat and aluminum alloy cladding, is manufactured with the same fabrication process with that of fuel plate except that a tungsten powder is used instead of U-Mo powder. A modal test showed that the surrogate plate and fuel plate have similar dynamic characteristics, and a tensile test demonstrated the similarity of the material property up to the yield strength range. The conducted tests proved that the surrogate tungsten plate has equivalent mechanical behaviors with that of a fuel plate, which leads to the acceptable use of a surrogate fuel assembly using tungsten/aluminum dispersion meat in various mechanical tests. The surrogate fuel assembly can be utilized for various out-of-pile characteristic tests, which are necessary for the licensing achievement of a research reactor that uses U-Mo dispersion fuel as a driver.