• Laser Solutions
• /
• v.18 no.3
• /
• pp.1-5
• /
• 2015

A 3D printer based on laser powder deposition (LPD), also known as DED (direct energy deposition), has been developed for fabricating metal parts. The printer uses a ytterbium fiber laser (1070nm, 1kW) and is equipped with an Ar purge chamber, a three-dimensional translation stage and a powder feeding system composed of a powder chamber and delivery nozzles. To demonstrate the performance of the printer, a tapered cylinder of 320mm in height has been fabricated successfully using Ti-6Al-4V powders. The process parameters including the laser output power, the scan speed, and the powder feeding rate have been optimized. A 3D printed test specimen shows mechanical properties (yield strength, ultimate tensile strength, and elongation) exceeding the criteria to employed in a variety of Ti alloy applications.

• Proceedings of the KIEE Conference
• /
• 1997.07b
• /
• pp.527-529
• /
• 1997

In this paper, a system to control feeding rate by fuzzy controller was developed and tested in the various raw material of the powder gram state. The designed fuzzy controller for feeding rate control system is proved robust performance under parameter variation and load disturbance effect which is caused by the kind and quantity of various raw material.

• Journal of Ginseng Research
• /
• v.4 no.1
• /
• pp.40-48
• /
• 1980

This study was to investigate the feeding effects of diet supplemented with 2% ginseng powder on the growth rate and the blood glucose of rats. The Albino rats (48 heads), weighing 98 to 105g, were divided into two different diet groups, which were subdivided into six subgroups for insulin and epinephrine treatment. They were 1) Co group as control, 2) CG group as control group contained 2% ginseng powder, 3) Io group fed on the diet of Co group and treated with insulin, 4) IG group fed on the diet of CG group and treated with insulin, 5) Eo group fed on the diet of Co group and treated with epinephrine, and 6) EG group fed on the diet of CG group and treated with epinephrine. Each animal group was maintained with the corresponding diet for 27 days, and then they were sacrificed. The growth rate of rats and the diet consumption and efficiency ratio of food and protein were determined during the feeding period. After sacrificing of the animals, the weight of some organs and the blood glucose were analyzed. The results obtained are summarized as follows; 1. The gained body weights of the dietary group supplemented with 2% ginseng powder(CG) were less increased in comparison to the corresponding control group(Co). Those of IG were significantly higher than those of to (p<0.01). Those of EG were significantly lower than those of Eo group (p<0.01). 2. It was found that the variations of the efficiency ratio of food and protein showed the similarity in those of the growth of each group. 3. The final weights of liver kidney spleen. and heart were not significantly different between Co and CG. The weights of the liver, kidney, and heart of IG were significantly greater than those of Co (p<0.05). The weights of the liver and heart of EG were significantly lower than those of Eo(p<0.01) 4. The blood glucose of CG was a little higher than that of Co, but not significant. Also it was found that was little difference between IG and Io. It showed that the blood glucose of EG was significantly lower than that of Eo(p<0.0 1).

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.1 no.2
• /
• pp.121-127
• /
• 1968

This research has been dealt with the nutritional component analysis of two kinds of non-edible marine algae, Sargassum herneri (Turner) C. Ag. and Zostera marina Linne which grow abundantly around the southern coast of Korea, These marine algae were mixed in several kinds of samples rates with the combined feed for poultry sold in the market. These were given to 35 chicken in seven test divisions respectively. We have experimented with 35 chicken grown up for two weeks after hatchout. The combined food for poultry obtained from the market was set up as control divisions. The experiments were as follows: 1) The average weight increase in each test division during feeding (Table 5, Fig.2). 2) Food conversion rate and food efficiency in each test division (Table 7). 3) The comparison of digestive rate of crude protein during feeding (Table 8), The results were as follows: 1) The weight increasing rate of the test animal stock fed the food containing $5\~10\%$ of Sargassum horneri (Turner) C. Ag. powder was higher than the rate of those fed only market food for poultry. 2) The stock given food containing $10\%$ Zostera marine powder showed lower growth than the control divison. 3) No apparent trouble owing to salt component involved in the marine algae was found. 4) The stock given food containing sodium glutaminate and Sargassum horneri (Turner) C. Ag. had better result than that without sodium glutaminate.

• Laser Solutions
• /
• v.2 no.2
• /
• pp.34-41
• /
• 1999

A RS840 $CO_2$laser and a powder auto-feeding apparatus have been used to deposit single tracks of Ni-base superalloy on low carbon steel. In this paper, the effects of laser cladding parameters on clad geometry, dilution and microhardness are studied. As a results, the w/h ratio of the clad layer increases with decreasing powder feed rate and increasing laser scan speed. Increase of powder density and decrease of specific energy have little effect on dilution. It was found that the clad layer of the highest hardness has a structure in which fine and leaf like phases are dispersed in ${\gamma}$Ni matrix.

• International Journal of Aerospace System Engineering
• /
• v.2 no.2
• /
• pp.1-5
• /
• 2015

The powder propellant rocket which uses micron-sized particles as fuel is storable and costly. Functions like thrust control and multiple-ignition can be realized by changing powder mass flow rate. In this paper, we discuss the theoretical performance of bi-propellant and mono-propellant powder rocket. When used as the fluidization gas, helium can improve specific impulse dramatically. The stability of the powder feeding device is preliminarily quantified through metal/N2O powder rocket hot fire tests.

• Journal of Powder Materials
• /
• v.10 no.5
• /
• pp.349-352
• /
• 2003

This study examined the correlation of various operational factors including reaction temperature and the quantity of reductant and diluent with the characteristics of powder using $K_2$ TaF$_{7}$ as feed materials, Na as a reductant and KCl/KF as a diluent. Also to control the particle size and shape, external supply system developed, it can provide a feed material and a reductant at a fixed quantity and evaluated the characteristics of tantalum powder. When the external supply system was applied instead of the batch type process that charges feed material, reductant and diluent at the same time, it was possible to induce regular reduction reaction between feed material and reductant, which increased the recovery rate and reduced the mixture of impurities. In particular, the application of the external supply system enabled the control of reaction temperature and reaction speed according to the feeding rate of feed material during reduced reaction, and resultantly it enabled the manufacturing of granular-shaped powder with a regular granularity of 2∼3 ${\mu}{\textrm}{m}$ and purity of 99.5%.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.3 no.2
• /
• pp.117-124
• /
• 1993

It was found that the basic principle of continuous crystal growth method was following as; the powder supplied from the feeding system is molten in the graphite crucible under the ambient gas. After forming the molten zone in the lower part of the crucible, the seed crystal is deeped into the melt and pulled down with the rotation so that the melt crystallized from the seed. When the lowering rate, rotation rate, feeding rate and temperature are correct, the single crystal can grow. The critical melt level, the feeding rate, the growth rate, the change of the shape of molten zone by the graphite susceptor and crucible, the position of work coil, the balance between the gravitational force of melt and the centrifugal force originated from the rotation of seed which are the variables of the crystal growth and the sintering phenomenon of melt surface were researched.

• Korean Journal of Metals and Materials
• /
• v.48 no.12
• /
• pp.1097-1102
• /
• 2010

Silver coated copper powders were prepared by a chemical reduction method with controlling the deposition process variables such as the feeding rate of the silver ionic solution and concentration of the reductants at room temperature. The characteristics of the products were evaluated by scanning electron microscope (SEM), X-ray diffractometer (XRD), atomic absorption spectrophotometer (AA) and a 4 probe resistivity measurement system. The optimum condition of the preparation of Ag coated Cu powders was at 0.05 M of potassium sodium tartrate and 2 ml/min of the feeding rate of the silver ionic solution. Our method successfully produced dense, uniform, and well-dispersed Ag coated Cu powder of $2{\sim}2.5{\mu}m$ witha silver layer of 100~200 nm. Additionally, we found that thespecific resistivity of the 30 wt.% Ag coated Cu powder was similar to that of pure silver, so that the composite powder could be used as an alternative electromagnetic shielding material for silver.

• Journal of the Korean Ceramic Society
• /
• v.29 no.7
• /
• pp.539-543
• /
• 1992

The continuous growth method was developed for Mn-Zn Ferrite single crystals. It is a new process that the polycrystalline MnχZn1-χFe2O4 raw materials are supplied continuously from the powder feeding system to the crucible heated by R.F. induction and melted in the crucible, and after the single crystals seed is attached to crucible's hole, the crystals are pulled downward with rotation. Growing the crystals by using the growth method different from the conventional Bridgman or Floating Zone method, we defined the factors having effect on the crystal growing through the pre-experiments. They are temperature distribution in the crucible, melt velocity according to its height, wettability between the crucible's bottom and melt. Therefore, Mn-Zn Ferrite single crystals were to be grown by attaining the appropriate melt height in the crucible, powder feeding rate, temperature gradient between the crucible and interface, crystal growing speed, and this method was confirmed to have possibility for single crystal growing.