• Korean Journal of Poultry Science
• /
• v.37 no.2
• /
• pp.181-190
• /
• 2010

Mycoplasma gallisepticum (MG) infection results in severe economic loss in the poultry industry. In the previous reports, F strain, one of the MG live vaccine strains, could protect the bird from field infection of MG strains. In this study, efficacy of PoulShot$^{(R)}$ MG-F vaccine againset mycoplasma gallisepticum infection was evaluated for filed application in commercial layers. Commercial layers from two different farms received with PoulShot$^{(R)}$ MG-F, MG-F live vaccine at 9~14 weeks of age. Serological immune response to MG vaccine, the persistency of MG vaccine strain in the upper respiratory tracts and egg production rate were evaluated in the vaccinated, contacted or nonvaccinated flocks. The serological response was first detected at 3 weeks after vaccination (WAV) and persisted for 31 WAV. The MG vaccine strains were also persisted for 31 WAV based on the reisolation and PCR detection. There was no difference between the vaccinated or non-vaccinated flocks in the egg production rate but in the abnormality rate of eggs. Based on the above results, we suggested that the PoulShot$^{(R)}$, MG-F live vaccine was fully immunogenic and had characteristics of long persistence in the upper respiratory trachea which will reduce economic loss caused by MG infection in the layer farms.

• Proceedings of the Korean Society of Potoscience Conference
• /
• spring
• /
• pp.41-41
• /
• 2004

• Journal of Power Electronics
• /
• v.5 no.2
• /
• pp.83-98
• /
• 2005

As wind turbine technology and control has advanced over the last decade, this has led to a high penetration of wind turbines into the power system. Whether it be for a large wind turbine or an offshore wind farm with hundreds of MW power capacity, the electrical system has become more and more important in controlling the interaction between the mechanical system of the wind turbine and the main power system. The presence of power electronics in wind turbines improves their controllability with respect not only to its mechanical loads but also to its power quality. This paper presents an overview of a developed simulation platform for the modeling, design and optimization of wind turbines. The ability to simulate the dynamic behavior of wind turbines and the wind turbine grid interaction using four simulation tools (Matlab, Saber, DIgSILENT and HAWC) is investigated, improved and extended.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.2
• /
• pp.282-289
• /
• 2003

Animal feed additives are used worldwide for many different reasons. Some help to cover the needs of essential nutrients and others to increase growth performance, feed intake and therefore optimize feed utilization. The health status of animals with a high growth performance is a predominant argument in the choice of feed additives. The use of feed additives is more and more questioned by the consumers. Therefore, the feed industry is highly interested in valuable alternatives which could be accepted by the consumers. Probiotics, prebiotics, enzymes and highly available minerals as well as herbs can be seen as alternatives. Herbs, spices and their extracts (botanicals) have a wide range of activities. They can stimulate feed intake and endogenous secretions or have antimicrobial, coccidiostatic or anthelmintic activity. A major field of application of herbs is the protection of animals and their products against oxidation.

• YAKHAK HOEJI
• /
• v.3 no.1
• /
• pp.23-25
• /
• 1957

The herb of Geranium sibirium L, a drug knwon as "Chui Sonni Poul" distributed widely, has been used as a folk-medicine for the treatment of diarrhea. The dried entire herb is boiled with methanol and methanol is distilled of from the filtered methanol extract under reduced pressure. Then the extract is boiled with water and filtered off. From the filtrate, the following substances are isolated and identified by treating with organic solvents as ether, ethyl acetate, and etc.: 1. Gallic acid: a colorless needle crystal which is soluble in alcohol and water. mp.235.deg. C, positive (dark blue) against the ferric chloride reagent. 0.76 percent of gallic acid is yielded from the herb. 2. Quercetin: a light yellow crystal. mp.194.deg. C. negative against the ferric chloride reagent. 3. Ellagic acid: a light yellow crystal which is insoluble in ehter and acetone and slightly soluble in alcohol. Positive (blue) against the ferric chloride reagent. The crystal obtained by recrystalisation from pyridine, does not melt by 360.deg. C. Represent a yield of 0.03 percent from the herb. 4. Crude tannin: a approximately 7.6 percent of crude tannin is yielded by treating with ethyl acetate. gallic acid and querceetin are yielded by hydrosis with dliute sulfuric acid. Based on the above results, the following suggestion could be recommendable; Geraed in the Japanese Pharmacoeia VI.acoeia VI.

• Geomechanics and Engineering
• /
• v.1 no.1
• /
• pp.1-15
• /
• 2009

Many aspects of the behavior of sands are affected by the content of non-plastic fine particles and these various aspects should be included in a constitutive model for the soil behavior. The fines content affects maximum and minimum void ratios, compressibility, shear strength, and static liquefaction under undrained conditions. Twenty-eight undrained triaxial compression tests were performed on mixtures of sand and fine particles with fines contents of 0, 10, 20, 30, 50, 75, and 100% to study the effects of fines on void ratio, compressibility, and the occurrence of static liquefaction. The experiments were performed at low consolidation pressures at which liquefaction may occur in near-surface, natural deposits. The presence of fines creates a particle structure in the soil that is highly compressible, enhancing the potential for liquefaction, and the fines also alter the basic stress-strain and volume change behavior, which should be modeled to predict the occurrence of static liquefaction in the field. The void ratio at which liquefaction occurs for each sand/fines mixture was determined, and the variation of compressibility with void ratio was determined for each mixture. This allowed a relation to be determined between fines content, void ratio, compressibility, and the occurrence of static liquefaction. Such relations may vary from sand to sand, but the present results are believed to indicate the trend in such relations.

• Korean Institute of Interior Design Journal
• /
• v.14 no.2 s.49
• /
• pp.178-187
• /
• 2005

The Danish furniture designer, Verner Panton's work is comprised of the appreciation and application of the traditional for the application of a wide range of high-tech material accompanied by the bold and primary color used his work, the purpose of this study is to draw the expressive characteristics apparent in his work by analyzing the origin, background and case study of his design. The origin including the background of Verner Panton's design is based on the identity of the Danish Modernism and International design trend, which is revolved around the pop culture and is under the direct influence of Martin Johansen and Poul Henningsen. In order to understand the expressive characteristics found in the Verner Panton's chair design, a case study was conducted from 1955 where his debut piece of work, Cone chair was premiered at the Fredericia furniture Fair up through 1970 where Visiona 2 project was presented at the Koln International furniture fair. As a result, the total of 41 chair designs was analyzed by the following four criteria: form, finishing, functionality, and structure. According to the result of the analysis, the design by Verner Panton was based on the experiment of the organic form, his tendency to the pop culture, the concept of space, mobility, simplicity, and sensible creativity of space. Once criticized for being extemporary and consumptive, nevertheless, the outcome of Verner Panton's chairs not only introduced the fresh new and positive ideas that have been mass-producing for over 40 yews but also they keep on getting upgraded in accordance with the development of material.

• Journal of Korean Society of Transportation
• /
• v.23 no.7 s.85
• /
• pp.77-86
• /
• 2005

Level of service(LOS) is a quantify measure describing operational conditions within a traffic stream, generally, in terms of such service measures as speed, travel time, freedom to measures, traffic interruptions, comfort and convenience. The LOS is leveled by highway facilities according to measure of effectiveness(MOE) and then used to evaluate performance capacity. The current evaluation of a urban road is performed by only a aspect of traffic operation without any concepts of safety. Therefore, this paper presents a method for evaluation of risk order for urban road with new MOE, user cost analysis, considering both smooth traffic operation(congestion) and traffic safety(accident). The user coat is included traffic accident cast by traffic safety and traffic congestion cost by traffic operation. First of all, a number of traffic accident and accident rate by highway geometric is inferred from urban road traffic accident prediction model (Poul Greibe(2001)) Secondly, a user cost is inferred as traffic accident cast and traffic congestion cost is putting together. Thirdly, a method for evaluation of a urban road is inferred by user cost analysis. Fourthly a accident rate by segment predict with traffic accidents and data related to the accidents in $1996{\sim}1998$ on 11 urban road segments, Gwang-Ju, predicted accident rate. Traffic accident cost predict using predicted accident rate, and, traffic congestion cost predict using predicted average traffic speed(KHCM). Fifthly, a risk order are presented by predicted user cost at each segment in urban roads. Finally, it si compared and evaluated that LOS of 11 urban road segments, Gwang-Ju, by only a aspect of traffic operation without any concepts of safety and risk order by a method for evaluation of urban road in this paper.