• Journal of Animal Science and Technology
• /
• 제61권4호
• /
• pp.216-224
• /
• 2019

This study was conducted to investigate the effects of hot melt extrusion (HME) nano-iron as an alternative for the common ferrous sulfate on iron (Fe) bioavailability, growth performance, nutrient digestibility, intestinal morphology, and intestinal microbiota of weanling pigs. A total of 200 piglets (Landrace ${\times}$ Yorkshire ${\times}$ Duroc) were randomly allotted to seven treatments on the basis of initial body weight (BW) and sex. Treatments were the INO100 (100 ppm Fe as $FeSO_4$), HME-Fe levels (50, 75, and 100 ppm nano-Fe as $FeSO_4$). ORG100 (100 ppm Fe as iron methionine). In phase 1, the HME50 pigs showed the lowest Fe content in feed and feces. Plasma Fe concentration was increased in HME100 and ORG100 pigs. In phase 2, there were significantly lower concentration of Fe in feed and feces of HME50 pigs (p < 0.01). A lower Fe concentration in the plasma and liver were observed in HME50 pigs compared with HME100 pigs. Concentration of red blood cell (RBC) was the lowest (p < 0.01) for HME50 pigs. During phase 2, the HME100, HME75, and ORG100 pigs showed a higher RBC and hemoglobin values compared with HME50 pigs. Digestibility of gross energy (GE) and crude protein (CP) were significantly higher in HME100 pigs compared with HME50 pigs. There was an increased (p < 0.01) villus height in the duodenum and jejunum of HME100 pigs compared with HME50 pigs. It is concluded that dietary Fe does not improve growth performance of weanling pigs; however, increasing the dietary iron concentration in weanling piglets increased the RBC and hemoglobin. In addition, the potential ability of HME to be used at a lower level (HME75) was observed.

• Animal Bioscience
• /
• 제36권8호
• /
• pp.1190-1198
• /
• 2023

Objective: To our knowledge, there are few studies on the correlation between internal structure of fermented products and nutrient delivery from by-products from coffee processing in the ruminant system. The objective of this project was to use advanced mid-infrared vibrational spectroscopic technique (ATR-FT/IR) to reveal interactive correlation between protein internal structure and ruminant-relevant protein and energy metabolic profiles of by-products from coffee processing affected by added-microorganism fermentation duration. Methods: The by-products from coffee processing were fermented using commercial fermentation product, called Saus Burger Pakan, consisting of various microorganisms: cellulolytic, lactic acid, amylolytic, proteolytic, and xylanolytic microbes, for 0, 7, 14, 21, and 28 days. Protein chemical profiles, Cornell Net Carbohydrate and Protein System crude protein and CHO subfractions, and ruminal degradation and intestinal digestion of protein were evaluated. The attenuated total reflectance-Ft/IR (ATR-FTIR) spectroscopy was used to study protein structural features of spectra that were affected by added microorganism fermentation duration. The molecular spectral analyses were carried using OMNIC software. Molecular spectral analysis parameters in fermented and non-fermented by-products from coffee processing included: Amide I area (AIA), Amide II (AIIA) area, Amide I heigh (AIH), Amide II height (AIIH), α-helix height (αH), β-sheet height (βH), AIA to AIIA ratio, AIH to AIIH ratio, and αH to βH ratio. The relationship between protein structure spectral profiles of by-products from coffee processing and protein related metabolic features in ruminant were also investigated. Results: Fermentation decreased rumen degradable protein and increased rumen undegradable protein of by-products from coffee processing (p<0.05), indicating more protein entering from rumen to the small intestine for animal use. The fermentation duration significantly impacted (p<0.05) protein structure spectral features. Fermentation tended to increase (p<0.10) AIA and AIH as well as β-sheet height which all are significantly related to the protein level. Conclusion: Protein structure spectral profiles of by-product form coffee processing could be utilized as potential evaluators to estimate protein related chemical profile and protein metabolic characteristics in ruminant system.

• 한국토양비료학회지
• /
• 제44권6호
• /
• pp.1245-1251
• /
• 2011

본 연구는 축산부문에서 주요한 가축종인 돼지의 사육과 정과 도축 가공과정에서 발생하는 양돈 바이오매스의 발생특성을 조사 분석하고, 전과정 평가 기법을 활용하여 물질(퇴 액비) 및 에너지 (바이오가스) 자원화 잠재량을 평가함으로써 지역단위 바이오매스 순환단지 조성을 위한 기초자료를 확립하고자 하였으며, 이를 위해 양돈 바이오매스의 발생 단계를 사양단계와 도축 가공단계로 구분하여 각각의 단계에서 발생하는 양돈바이오매스의 물질 및 에너지 자원화 잠재량을 평가하였다. 사양단계는 성장단계(사육기간, 평균체중)에 따라 자돈 (1~9주, 23.4 kg), 육성돈 1기 (10~15주, 50 kg), 육성돈 2기 (16~21주, 80 kg), 비육돈 (22~26주, 110 kg)의 단계로 분류하고 도축 가공단계에서 발생하는 혈액과 폐내장류, 장내 잔재물로 구분하여 생산량을 산정하여 양돈 바이오매스의 물질 및 에너지 자원 잠재량을 평가한 결과 돼지 1두에서 발생하는 바이오매스의 총량은 542.02 kg로 나타났다. 양돈 바이오매스는 분 $210.68kg\;head^{-1}$, 뇨 $315.78kg\;head^{-1}$가 발생하는 것으로 평가되었으며, 분뇨 발생량은 성장단계별로 자돈 14.2%, 육성돈 1기 19.6%, 육성돈 2기 30.9%, 비육돈 35.2%를 차지하는 것으로 나타났다. 양돈 바이오매스에서 기인하는 매탄 생산 잠재량은 $24.56Nm^3\;head^{-1}$이였으며, 사양 단계에서 기인하는 메탄 생산 잠재량이 92.9%를 차지하는 것으로 나타났다. BMP 시험에 의한 최대 메탄생산량은 $16.58Nm^3\;head^{-1}$로 나타나 매탄 생산 잠재량의 67.5%가 에너지로 전환 가능하였으며, 94.4%가 사양 단계에서 기인하는 것으로 나타났다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.84.2-84.2
• /
• 2010

PEMS (printed electro-mechanical system) is fabricated by means of various printing technologies. Passive and active components in 2D or 3D such as conducting lines, resistors, capacitors, inductors and TFT, which are printed with functional materials, can be classified in this category. And the issue of PEMS is applied to a R2R process in the manufacturing process. In many electro-devices, the vacuum process is used as the manufacturing process. However, the vacuum process has a problem: it is difficult to apply toa continuous process as a R2R printing process. In this paper, we propose an ESD (electro static deposition) printing process has been used to apply an organic solar cell of thin film forming. ESD is a method of liquid atomization by electrical forces, anelectrostatic atomizer sprays micro-drops from the solution injected into the capillary, with electrostatic force generated by electric potential of about tens of kV. ESD method is usable in the thin film coating process of organic materials and continuous process as a R2R manufacturing process. Therefore, we experiment the thin films forming of PEDOT:PSS layer and Active layer which consist of the P3HT:PCBM. The result of experiment, organic solar cell using ESD thin film coated method is occurred efficiency of about 1.4%. Also, the case of only used to ESD method in the active layer coating is occurred efficiency of about 1.86% as the applying a spin coating in the PEDOT:PSS layer. We can expect that ESD method is possible for continuous process to manufacture in the organic solar cell or OLED device.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 추계학술발표대회
• /
• pp.5.1-5.1
• /
• 2009

Organic photovoltaic (OPV)cells have attracted considerable attention due to their potential for flexible, lightweight, and low-cost application of solar energy conversion. Since a 1% power conversion efficiency (PCE) OPV based on a single donor-acceptor heterojunction was reported by Tang, the PCE has steadily improved around 5%. It is well known that a high parallel (shunt)resistance and a low series resistance are required simultaneously to achieve ideal photovoltaic devices. The device should be free of leakage current through the device to maximize the parallel resistance. The series resistance is attributed to the ohmic loss in the whole device, which includes the bulk resistance and the contact resistance. The bulk resistance originated from the bulk resistance of the organic layer and the electrodes; the contact resistance comes from the interface between the electrodes and the active layer. Furthermore, it has been reported that the bulk resistance of the indium tin oxide (ITO) of the devices dominates the series resistance of OPVs for a large area more than $0.01\;cm^2$. Therefore, in practical application, the large area of ITO may significantly reduce the device performance. In this work, we investigated the effect of sheet resistance ($R_{sh}$) of deposited ITO on the performance of OPVs. It was found that the device performance of polythiophene-fullerene (P3HT:PCBM) bulk heterojunction OPVs was critically dependent on Rsh of the ITO electrode. With decreasing $R_{sh}$ of the ITO from 39 to $8.5\;{\Omega}/{\square}$, the fill factor (FF) of OPVs was dramatically improved from 0.407 to 0.580, resulting in improvement of PCE from $1.63{\pm}0.2$ to $2.5{\pm}0.1%$ underan AM1.5 simulated solar intensity of $100\;mW/cm^2$.

• 대한치과의사협회지
• /
• 제55권2호
• /
• pp.128-138
• /
• 2017

Objective: The aim is to evaluate the potential of the mesiodens through the comparative inorganic analysis of 3rd molar teeth prior to clinical study. Material and methods: The extracted mesiodens and the 3rd molar teeth were prepared. The teeth are prepared as in the process of the autogenous tooth bone graft. Scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD) analysis was performed for inorganic analysis. Results: Rough and porous surfaces were observed in all materials in SEM analysis. Ca/P ratio of mesiodens was 1.55 and the 3rd molar was 1.22 in EDS analysis. XRD analysis shows that the 3 main peaks position were similar. This means that the graft materials are very similar to that of the crystallinity. Conclusions: The mesiodens and the 3rd molar teeth are very similar to the inorganic component. These results provide the reasonable rationale that mesiodens can be used as autogenous tooth bone graft in a clinic.

• 한국환경보건학회지
• /
• 제44권2호
• /
• pp.188-195
• /
• 2018

Objectives: This study aimed to investigate the association between vitamin D deficiency and the risk of diabetes mellitus, and also examined whether their association is differed by sex and age. Methods: We analyzed the data from 28,135 subjects ${\geq}20years$ old who were registered for the Korea National Health and Nutrition Examination Survey (KNHANES) 2008-2014. Vitamin D was measured using serum 25-hydroxyvitamin D (25(OH)D) concentrations. Results: After adjusting for potential confounders (age, sex, education, income, total energy intake, smoking, physical activity, body mass index, and waist circumference), lower vitamin D was dose-dependently associated with a higher risk of diabetes mellitus (p-trend=0.004). When compared with the sufficient group (25(OH)D ${\geq}30ng/mL$), the severe deficient group (25(OH)D <10 ng/mL) had 1.46 (95% CI 1.11-1.94) odds ratio for the risk of diabetes mellitus. This association was markedly strong in men and adults aged ${\geq}40$, whereas no significant association was observed in women and adults aged <40. Conclusions: We found that vitamin D deficiency may be associated with an increased risk for diabetes mellitus in Korean adults. Our findings suggest that intake of higher vitamin D may help reduce the risk of diabetes mellitus.

• 한국물환경학회지
• /
• 제26권6호
• /
• pp.1034-1039
• /
• 2010

Variation of formation potential of THM (THMFP) by chlorination of humic acid and characteristics of water quality with ${\gamma}$-ray irradiation were investigated, which were divided into two categories by the order of ${\gamma}$-ray irradiation and chlorination in water treatment process. The group A consisted of the ${\gamma}$-ray irradiation followed by chlorination process of humic acid, and the group B consisted of the chlorination followed by ${\gamma}$-ray irradiation process. The pH, ORP, $UV_{254}$, and DOC decreased rapidly with an increase in ${\gamma}$-ray irradiation of 3 kGy. while conductivity was little changed. Maximum degradation ratio of chloroform in THMs of group A was 82%, while that in group B was 69%. No brominated THMs were detected at high irradiation (>3 kGy). We found that group A water treatment process was more effective in lowering the THMFP than that of group B.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 추계학술발표대회
• /
• pp.43.2-43.2
• /
• 2011

Single-walled carbon nanotubes (SWCNT) are transparent in the visible and show conductivity comparable to copper, and are environmentally stable. SWCNT films have high flexibility, conductivity and transparency approaching that indium tin oxide (ITO), and can be prepared inexpensively without vacuum equipment. Transparent conducting Films (TCF) of SWCNTs has the potential to replace conventional transparent conducting oxides (TCO, e.g. ITO) in a wide variety of optoelectronic devices, energy conversion and photovoltaic industry. However, the sheet resistance of SWCNT films is still higher than ITO films. A decreased in the resistivity of SWCNT-TCFs would be beneficial for such an application. We fabricated SWCNT sheet with $KAuBr_4$ on PET substrate. Arc-discharge SWCNTs were dispersed in deionized water by adding sodum dodecyl sulfate (SDS) as surfactant and sonicated, followed by the centrifugation. The dispersed SWCNT was spray-coated on PET substrate and dried on a hotplate at $100^{\circ}C$. When the spray process was terminated, the TCF was immersed into deionized water to remove the surfactant and then it was dried on hotplate. The TCF film was then treated with AuBr4-, rinsed with deionized water and dried. The surface morphology of TCF was characterized by field emission scanning electron microscopy. The sheet resistance and optical transmission properties of the TCF were measured with a four-point probe method and a UV-visible spectrometry, respectively. $HNO_3$ treated SWCNT films with Au nano-particles have the lowest 61 ${\Omega}$/< sheet resistance in the 80% transmittance. Sheet resistance was decreased due to the increase of the hole concentration at the washed SWCNT surface by p-type doping of $AuBr_4{^-}$.

• Archives of Reconstructive Microsurgery
• /
• 제5권1호
• /
• pp.70-79
• /
• 1996

From January 1980 to May 1995, ninety-six patients had been treated by free-flap transfer for the soft tissue defects of the extremities. Ninety-eight cases of free-tissue transfer were reviewed to evaluate the clinical reliability in terms of survival and quality of long-time function after reconstructive surgery. Among these 98 cases(27 cases in latissimus dorsi myocutaneous flap, 25 in dorsalis pedis flap, 20 in forearm fasciocutaneous flap, 9 in groin flap, 7 in gracilis myocutaneous flap, 6 in 1st web space flap of foot and 4 cases in tensor fascia lata flap), 92 cases of then were survived. 7 cases were performed with vein grafts. We ananalyzed the reconstruction of the extremities on 98 cases with the soft tissue defects which had been reconstructed free-flap transfer and followed for minimum 1 year period at Korea University Hospital. 1. 92 cases(93.9%) of the total 98 cases were successful and can be obtained the excellent results in soft tissue free-flap transfer. 2. While there were no clinically significant differences in survival rate of flaps transferred from different potential flap donor sites,3 cases of 9 groin flaps were showed higher failure rate due to the complications such as arterial thrombosis, infection and anatomical variation of vessels. 3. Postoperative thrombectomy was performed in 30 cases to be occured in the arterial and venous thrombosis. The revision was failed in 2 cases due to persistent arterial thrombosis and infection, then treated with skin graft. 4. Vein graft was frequently required in severely compromised-soft tissue defects resulted from high-energy trauma. The vein graft was not stitistically significant on the frequency of flap failure rate(P<0.04). 5. Meticulous monitoring, careful planning, early revision and technical considerations will provide for a high clinical success of the free-flap transfer.