• 자원리싸이클링
• /
• 제16권1호
• /
• pp.68-72
• /
• 2007

전기적 환원을 이용한 인공 사진폐수에서의 은 회수를 연속순환식 공정을 적용하여 환원시간 및 두 전극간의 전합 차, 농도유량에 따른 영향을 검토하였다. 은 함유 인공폐수 처리에 있어 적용(인가) 전압과 초기 농도가 증가함에 따라 제거율이 증가함을 보였다. 은 함유 인공폐수의 전해 반응 시, 음극에 환원 석출된 물질의 정성적인 분석을 위해 EPMA 및 XRD 분석 결과, 석출된 물질이 은임을 확인하였다.

• 한국가시화정보학회지
• /
• 제21권1호
• /
• pp.18-25
• /
• 2023

In these days, high dimensional data prediction technology based on neural network shows compelling results in many different kind of field including engineering. Especially, a lot of variants of convolution neural network are widely utilized to develop pixel level prediction model for high dimensional data such as picture, or physical field value from the sensors. In this study, velocity vector field of ideal flow on ship surface is estimated on pixel level by Unet. First, potential flow analysis was conducted for the set of hull form data which are generated by hull form transformation method. Thereafter, four different neural network with a U-shape structure were conFig.d to train velocity vectors at the node position of pre-processed hull form data. As a result, for the test hull forms, it was confirmed that the network with short skip-connection gives the most accurate prediction results of streamlines and velocity magnitude. And the results also have a good agreement with potential flow analysis results. However, in some cases which don't have nothing in common with training data in terms of speed or shape, the network has relatively high error at the region of large curvature.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.97-103
• /
• 2001

The effects of the electrohydrodynamic (EHD) flow and turbulent diffusion on the collection efficiency of a model ESP composed of the plates with a cavity were studied through numerical computation. The electric field and ion space charge density were calculated by the Poisson equation of the electrical potential and the current continuity equation. The EHD flow field was solved by the continuity and momentum equations of the gas phase including the electrical body force induced by the movement of ions under the electric field. The RNG $k-{\varepsilon}$ model was used to analyze the turbulent flow. The particle concentration distribution was calculated from the convective diffusion equation of the particle phase. As the ion space charge increased, the particulate collection efficiency increased because the electrical potential increased over the entire domain in the ESP. The collection efficiency decreased and then increased, i.e. had a minimum value, as the EHD circulating flow became stronger when the electrical migration velocity of the charged particle was low. However, the collection efficiency decreased with the stronger EHD flow when the electrical migration of the particle was higher relatively. The collection efficiency of the model ESP increased as the turbulent diffusivity of the particle increased when the electrical migration velocity of the particle was low. However, the collection efficiency decreased for increasing the turbulent diffusivity when the electrical migration of the particle was higher relatively.

• 대한기계학회논문집
• /
• 제12권1호
• /
• pp.106-115
• /
• 1988

본 연구에서는 경계층 유동을 충류, 천이, 난류 영역을 포함하는 압축성 유동으로 가정하였고, Morgan 등이 제시한 새로운 질점분할 방법을 사용하여 속도분포를 계산하고, 점성 압축성 효과를 고려하기 위하여 viscous--inviscid interaction 법을 사용하였고 이 계산 결과를 기존의 실험값과 비교하여,타당성을 확인하였다.그리고 최적 양력의 익형 설계는 Augmented Lagrange multiplier 법을 사용하였고 비구속 조건을 갖는 목적함수 augmented lagrangian의 최소화는 Davidan-Fletcher-Powell 방법 중 self-scaling quasi-Newton algorithm을 사용하였다. 그리고 NACA 23012를 기본 익형으로 하고 NACA 64-2-415, NACA 64-2-A215, NACA 65-3-218를 보상 익형으로 하여 최대 양력익형을 설계 하였다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2023년도 학술발표회
• /
• pp.172-172
• /
• 2023

The use of low-cost IoT sensors for flow measurement in open channels has gained significant attention due to their potential to provide continuous and real-time data at a low cost. However, the accuracy and reliability of these sensors in real-world scenarios are not well understood. This study aims to compare the performance of low-cost IoT sensors in the laboratory and real-world conditions to evaluate their accuracy and reliability. Firstly, a low-cost IoT sensor was integrated with an IoT platform to acquire real-time flow rate data. The IoT sensors were calibrated in the laboratory environment to optimize their accuracy, including different types of low-cost IoT sensors (HC-SR04 ultrasonic sensor & YF-S201 sensor) using an open channel prototype. After calibration, the IoT sensors were then applied to a real-world case study in the Dorim-cheon stream, where they were compared to traditional flow measurement methods to evaluate their accuracy.The results showed that the low-cost IoT sensors provided accurate and reliable flow rate data under laboratory conditions, with an error range of less than 5%. However, when applied to the real-world case study, the accuracy of the IoT sensors decreased, which could be attributed to several factors such as the effects of water turbulence, sensor drift, and environmental factors. Overall, this study highlights the potential of low-cost IoT sensors for flow measurement in open channels and provides insights into their limitations and challenges in real-world scenarios.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2011년도 전기공동학술대회 논문집
• /
• pp.309-309
• /
• 2011

This paper outlines extraction potential of tidal stream resources from the simplified channel in which flow is driven by a head difference between inlet and outlet. Energy extraction alters the flow within a simple channel, and extraction of 10% energy flux in a natural channel would give rise to a flow speed reduction of about 5.7%.

• 약학회지
• /
• 제39권5호
• /
• pp.480-486
• /
• 1995

The change in discharge current of a glow discharge has been shown the potential sensitive detector for gas chromatography. To investigate the effect of carrier gas on the electrical characteristics of the discharge and the peak response, the discharge pressure, gas flow rate, and discharge gap have been studied. The discharge gas included the Ar, He, and N$_{2}$. The gas flow rate has been found one of the important parameters to affect both the electrical characteristics and the peak response.

• 대한조선학회지
• /
• 제22권3호
• /
• pp.9-18
• /
• 1985

The numerical calculation for solving boundary-value problem related to potential flows with a free surface is carried out by application of the localized finite element method. Only forced motion of 2-D body in infinitely deep fluid is considered, although this schemes is equally applicable to any first order time-harmonic problems of similar nature. The infinite domain of the fluid is separated into the inner flow field and the outer flow field with common inter-surface boundary. The finite element method is applied to obtain the solution in the inner flow field and the Green functions are utilized to represent the solution in the outer flow field. At the inter-surface boundary, the continuity of the value of potential and the normal derivative of the potential(i.e. matching condition) is conserved. The present method has better computational efficiency than the previous LFEM and the integral equation method of Frank. This enhanced computational efficiency is presumably due to the fact that the present method gives a symmetric coefficient matrix and requires less computational time in calculating the influence coefficient matrix of Green function than the integral equation method. And the irregular frequency desen't exist because the uniqueness of the solution is assured by the such that the exact free surface condition is satisfied on the boundary of the localized finite element region(i.e. inner region). As an example of the above method, the hydrodynamic forces for the circular cylinder and the rectangular cylinders are calculated. In the computed results, the small number of singularity distribution segments($3{\sim}6$) give good result relative to Ursell's and Vugts'.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2005년도 춘계학술대회 논문집
• /
• pp.41-46
• /
• 2005

본 연구에서는 자유수면 위를 고속으로 항주하는 트랜섬 선미를 채택한 선박에 의하여 발생되는 선박주위 및 트랜섬 선미 끝단에서의 비선형 자유수면 경계조건을 만족하는 자유수면에서의 유동 및 파형을 해석하는 수치해석기법에 대하여 연구하고 포텐셜 유동해석기법인 랜킨소오스 패널법을 사용하여 선체주위 유동해석 프로그램을 개발하였다. 개발된 수치해석 프로그램의 타당성을 검증하기 위하여 고속선인 Athena선형, KCS(KRISO container ship)선형에 대하여 수치해석을 수행하였으며, 그 결과를 모형시험에 의하여 계측된 실험결과와 서로 비교하였다.

• 대한조선학회논문집
• /
• 제38권3호
• /
• pp.31-40
• /
• 2001

일반적으로 특이점들을 분포하여 물체주위 유동장을 해석할 때 저차패널법(Low-Order Panel Method)이 유용하게 사용되어져 왔다. 저차패널법과는 다르게 적분방정식의 계산정도와 해의 수렴성을 높일 수 있는 방법으로서, 물체경계의 형상을 2차 이상의 고차곡면요소로 표현하고 각 곡면요소 내에서 물리량의 변화를 동일한 차수를 갖는 고차경계요소법을 사용할 수 있다. 본 연구에서는 물체표면의 곡면요소와 물리량의 변화를 9절점 라그란지안(Lagrangian) 형상함수를 사용하여 정상 포텐셜유동 중에 작동하는 프로펠러 주위의 유동을 해석하였다. 개발된 프로그램을 프로펠러의 해석에 앞서 원형 날개에 대하여 Jordan의 선형 해석해와 비교하였으며, 두께의 영향을 관찰하였다. 프로펠러의 해석을 위해 DTRC 4119 프로펠러와 DTRC 4842 프로펠러에 적용하여 실험치와 계산치를 비교 검토하였다.