• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.9
• /
• pp.4015-4021
• /
• 2011

The purpose of this study is to investigate the effect of compositional ratio of additives, such as potassium ferrocyanide, aminoacetic acid (=glycine) and 2,2'-dipyridyl, on the physical properties of copper layer deposited by environment-friendly electroless plating reaction. The highest plating rate of copper layer, $9.5mg{\cdot}cm^{-2}{\cdot}hr^{-1}$, was obtained at 20 mg/L of potassium ferrocyanide and 0.01 mol/L of aminoacetic acid, which coincided with the change in the hardness of the copper layer. In the additives used in this study, potassium ferrocyanide was considered to improve the plating rate, aminoacetic acid increased the hardness value of deposited films and 2,2'-dipyridyl enhanced the brightness of copper deposited films.

• Nuclear Engineering and Technology
• /
• v.50 no.6
• /
• pp.886-889
• /
• 2018

This article presented two-staged chemical precipitation for radioactive wastewater decontamination by using chemical agents. The total amount of radioactive wastewater was $35m^3$, and main radionuclides were Cs-137, Cs-134, and Co-60. Initial radioactivity concentration of the liquid waste was 2264, 17, and 9 Bq/L for Cs-137, Cs-134 and Co-60, respectively. Potassium ferrocyanide, nickel nitrate, and ferrum nitrate were selected as chemical agents at high pH levels 8-10 according to the laboratory jar tests. After the process, radioactivity was precipitated as sludge at the bottom of the tank and decontaminated clean liquid was evaluated depending on discharge limits. By this precipitation method decontamination factors were determined as 66.5, 8.6, and 9 for Cs-137, Cs-134, and Co-60, respectively. By using the potassium ferrocyanide, about 98% of the Cs-137 was removed at pH 9. At the bottom of the tank, radioactive sludge amount from both stages was totally $0.98m^3$. It was transferred by sludge pumps to cementation unit for solidification. By chemical processing, 97.2% of volume reduction was achieved. The potassium ferrocyanide in two-staged precipitation method could be used successfully in large-scale applications for removal of Cs-137, Cs-134, and Co-60.

• Journal of the Korean Chemical Society
• /
• v.5 no.1
• /
• pp.42-47
• /
• 1961

A titration of a small amount of iron with standard potassium ferrocyanide using potassium thiocyanate as indicator has been studied. A sample solution containing $0.1{\sim}1.0$ mg. $Fe^{3+}$ in 60 ml. is pipeted into 100 ml. Erlenmyer flask and the pH of the solution is adjusted to $1.5{\sim}3.0$ with 0.1 N or 1 N $HNO_3$ and $NH_4OH.$ To this solution one ml. of 1 M KCNS solution as indicator is added. The solution colored by iron thiocyanate complex is titrated with 1/200 M or 1/400 M standard solution of potassium ferrocyanide from a 5 ml. micro-buret. Near the end point, when the color of sample changes from deep red to green, about 20 ml. of ether is added and shake the flask vigorously. The red color is extracted to the ether layer. To settle the ether layer a few drops of ethanol is added and then standard solution is added dropwise and shake vigorously. The end point is reached when the color of the ether layer disappears owing to the quantitative formation of $Fe_4[Fe(CN)_6]_3.$ In this titration, 0.lmg. of $Fe^{3+}$ can be determined within 1.0% of titration error, provided the following optimum conditions, i.e., pH $1.5{\sim}3.0$, final concentration of KCNS indicator; $0.01{\sim}0.02M$, at room temperature. The titration found to be interfered by the presence of slightly soluble salts, stable complex forming ions and the ions which would be reduced by ferrocyanide or oxidized by ferric ion.

• Proceedings of the PSK Conference
• /
• 2000.10a
• /
• pp.252.1-252.1
• /
• 2000

• Journal of Electrochemical Science and Technology
• /
• v.8 no.3
• /
• pp.236-243
• /
• 2017

A fixed-bed zinc/nickel redox flow battery (RFB) is designed and developed. The proposed cell has been established in the form of a fixed bed RFB. The zinc electrode is immersed in an aqueous NaOH solution (anolyte solution) and the nickel electrode is immersed in the catholyte solution which is a mixture of potassium ferrocyanide, potassium ferricyanide and sodium hydroxide as the supporting electrolyte. In the present work, the electrode area has been maximized to $1500cm^2$ to enforce an increase in the energy efficiency up to 77.02% at a current density $0.06mA/cm^2$ using a flow rate $35cm^3/s$, a concentration of the anolyte solution is $1.5mol\;L^{-1}$ NaOH and the catholyte solution is $1.5mol\;L^{-1}$ NaOH as a supporting electrolyte mixed with $0.2mol\;L^{-1}$ equimolar of potassium ferrocyanide and potassium ferricyanide. The outlined results from this study are described on the basis of battery performance with respect to the current density, velocity in different electrolytes conditions, energy efficiency, voltage efficiency and power of the battery.

• Korean Chemical Engineering Research
• /
• v.57 no.6
• /
• pp.847-852
• /
• 2019

In this study, the effect of additives on the performance of aqueous organic redox flow battery (AORFB) using quinoxaline and ferrocyanide as active materials in alkaline supporting electrolyte is investigated. Quinoxaline shows the lowest redox potential (-0.97 V) in KOH supporting electrolyte, while when quinoxaline and ferrocyanide are used as the target active materials, the cell voltage of this redox combination is 1.3 V. When the single cell tests of AORFBs using 0.1 M active materials in 1 M KCl supporting electrolyte and Nafion 117 membrane are implemented, it does not work properly because of the side reaction of quinoxaline. To reduce or prevent the side reaction of quinoxaline, the two types of additives are considered. They are the potassium sulfate as electrophile additive and potassium iodide as nucleophilie additive. Of them, when the single cell tests of AORFBs using potassium iodide as additive dissolved in quinoxaline solution are performed, the capacity loss rate is reduced to $0.21Ah{\cdot}L^{-1}per\;cycle$ and it is better than that of the single cell test of AORFB operated without additive ($0.29Ah{\cdot}L^{-1}per\;cycle$).

• Nuclear Engineering and Technology
• /
• v.55 no.2
• /
• pp.516-522
• /
• 2023

The co-precipitation process plays a key role in the decontamination of radionuclides from low and intermediate levels of liquid waste. For that reason, the removal of Cs ions from waste solution by the co-precipitation method was carried out. A simulated liquid waste (¹³³Cs) was prepared from a 0.1 M CsCl solution, while wastewater generated by washing steel ash served as a representative of radioactive cesium solution (¹³⁷Cs). By co-precipitation, potassium ferrocyanide was applied for the adsorption of Cs ions, while nickel nitrate and iron sulfate were selected for supporting the precipitation. The amount of residual Cs ions in the CsCl solution after precipitation and filtration was determined by ICP-OES, while the radioactivity of ¹³⁷Cs was measured using a gamma-ray spectrometer. After cesium removal, the amount of cesium appearing in both XRD and SEM-EDS was analyzed. The removal efficiency of ¹³³Cs was 60.21% and 51.86% for nickel nitrate and iron sulfate, respectively. For the ash-washing solution, the removal efficiency of ¹³⁷Cs was revealed to be more than 99.91% by both chemical agents. This implied that the co-precipitation process is an excellent strategy for the effective removal of radioactive cesium in waste solution treatment.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.15 no.1
• /
• pp.1-14
• /
• 2017

For the removal of cesium (Cs) from high radioactive/high salt-laden liquid waste, this study synthesized a highly efficient composite adsorbent (potassium cobalt ferrocyanide (PCFC)-loaded chabazite (CHA)) and evaluated its applicability. The composite adsorbent used CHA, which could accommodate Cs as well as other molecules, as a supporting material and was synthesized by immobilizing the PCFC in the pores of CHA through stepwise impregnation/precipitation with $CoCl_2$ and $K_4Fe(CN)_6$ solutions. When CHA, with average particle size of more than $10{\mu}m$, is used in synthesizing the composite adsorbent, the PCFC particles were immobilized in a stable form. Also, the physical stability of the composite adsorbent was improved by optimizing the washing methodology to increase the purity of the composite adsorbent during the synthesis. The composite adsorbent obtained from the optimal synthesis showed a high adsorption rate of Cs in both fresh water (salt-free condition) and seawater (high-salt condition), and had a relatively high value of distribution coefficient (larger than $10^4mL{\cdot}g^{-1}$) regardless of the salt concentration. Therefore, the composite adsorbent synthesized in this study is an optimized material considering both the high selectivity of PCFC on Cs and the physical stability of CHA. It is proved that this composite adsorbent can remove rapidly Cs contained in high radioactive/high salt-laden liquid waste with high efficiency.

• Membrane and Water Treatment
• /
• v.11 no.3
• /
• pp.189-193
• /
• 2020

In this study, electrokinetic remediation equipment was used to remove cesium (Cs) from clay soil and waste solution was treated with sorption process. The influence of electrokinetic process on the removal of Cs was evaluated under the condition of applied electric voltage of 15.0-20.0 V. In addition to monitoring the Cs removal, electrical current and temperature of the electrolyte during experiment were investigated. The removal efficiency of Cs from soil by electrokinetic method was more than 90%. After electrokinetic remediation, Cs was selectively separated from soil waste solution using sorbents. Various adsorption agents such as potassium nickel hexacyanoferrate (KNiHCF), Prussian blue, sodium tetraphenylborate (NaTPB), and zeolite were compared and KNiHCF showed the highest Cs removal efficiency. The Cs adsorption on KNiHCF reached equilibrium in 30 min. The maximum adsorption capacity was 120.4 mg/g at 0.1 g/L of adsorbent dosage. These results demonstrated that our proposed process combined electrokinetic remediation of soil and waste solution treatment with metal ferrocyanide can be a promising technique to decontaminate Cs-contaminated fine soil.

• Microbiology and Biotechnology Letters
• /
• v.6 no.4
• /
• pp.167-171
• /
• 1978

When Asp. niger was shaked at 3$0^{\circ}C$ in 500 mι Erlenmeyer flask with 50 ml of the medium containing 14% of Korean local commercial glucose brand, 0.45% of peptone, and mineral, the citric acid was produced at the level of 37~43 gram per liter in 8 days, and the citric acid production at medium containing X glucose brand was better than that containing Y glucose brand. When the contaminated minerals were removed from the local glucose by Ambelite-IR 120 and peptone by potassium ferrocyanide followed by readjustment of ferric ion content in the medium to 10 mg per liter, the citric acid formation reached 53 gram per liter, a production level of three times higher than that with the original Sakaguchi's medium. The further physiological studies and the mutation of isolated Asp. niger will be needed.