• 한국작물학회지
• /
• 제26권4호
• /
• pp.350-356
• /
• 1981

본 실험은 묘상용 Vinyl pot의 크기와 Vinyl pot당 육묘주수를 달리하여 향끽미종 잎담배인 소향으로 Vinyl pot당 육묘가능주수의 구명과 생육비절멸방안을 모색코자 실시한 결과를 요약하면 다음과 같다. 1. Vinyl pot가 클수록 이식묘의 주당 건물중, 변이계수 및 건물율은 증가하였으나 T/R율, 경쟁지수및 단위생산성은 감소하였다. 2. Pot당 육묘주수가 많을수록 변이계수, 경쟁지수 및 단위생산성은 증가하였으나 주당 건물중은 감소하였다. 3. 자상성약구와 가식구는 모두 4cm pot에서 3주, 5cm pot에서 5주까지 육묘가 가능하였고 자상성약육묘보다 가식육묘가 유리하였다. 4. 5cm pot당 5주씩 육묘하여 대조구(3.5cm pot에 1주 육묘)에 비하여 묘상면적 및 묘상자재를 60.9%, 이식노동력을 36.3% 절감되었다.

• 수산해양기술연구
• /
• 제44권4호
• /
• pp.273-281
• /
• 2008

In this study, the effect of slope length and angle at the entrance to fishing pots on the size of captured shrimp was examined to determine the optimal design of pots for use in Hokkaido, Japan. The purpose of the current study was to optimize the design of shrimp pots to allow greater control over the size of captured individuals for the purposes of shrimp resource management. Tank experiments were conducted to determine the optimal slope length and slope angle by analyzing the sizes of shrimp entering 10 model pots with combinations of five different slope lengths on slope angle of current shrimp pot, and five different angles on slope length of current shrimp pot. The results showed that, as the slope length of the pot increased, the size of individuals which entered the pot increased. In addition, as the slope angle was elevated in each of the five different slope angle treatments, the size of individuals entering was also increased.

• Fisheries and Aquatic Sciences
• /
• 제12권4호
• /
• pp.342-349
• /
• 2009

The purpose of the current study was to optimize shrimp-pot design to allow greater control over the size of captured individuals for the purposes of shrimp resource management. Tank experiments were conducted to determine the optimal slope length and slope angle by analyzing the sizes of shrimp that entered 25 model pots with combinations of five different slope lengths and five different angles. Shrimp size was measured using carapace length. The results showed that as the slope angle of the pot increased, the size of individuals that entered the pot increased. Furthermore, as the slope length increased, each of the five different slope angles of the pot increased, and the size of individuals entering also increased. The data indicated that the optimum pot design for reducing the capture of immature individuals had a $75^{\circ}$ slope angle and a 35.4 cm slope length.

• 수산해양기술연구
• /
• 제51권3호
• /
• pp.396-404
• /
• 2015

Morotoge shrimp Pandalopsis japonica is caught by pot and others in the eastern coastal waters of Korea. Comparative fishing experiments were carried out in the eastern coast of Korea, using the dome-shaped pots with different five mesh sizes (17.1, 24.8, 35.3, 39.8, and 48.3 mm) in order to estimate the mesh selectivity of the pot for the morotoge shrimp, Pandalopsis japonica. The SELECT (Share Each Length's Catch Total) analysis method was applied to the catch data. The master selection curve of the pot for the shrimp was estimated to be s(R) = exp(15.770R-10.573)/[1+exp(15.770R-10.753)], where R is the ratio of carapace length to mesh size. From the selection curves, the carapace lengths of 50% retention were 11.6, 17.0, 23.9, and 34.1 mm for 17, 25, 35, and 50 mm mesh-size pot, respectively. It means that the pots of larger mesh size allow more shrimp of small size to escape.

• 수산해양기술연구
• /
• 제46권3호
• /
• pp.204-213
• /
• 2010

Test fishing was carried out using six kinds of different mesh sizes (20, 22, 24, 28, 35, 40mm) for springnet-pot to study bycatches according to the mesh size and catches survey was done for another one (mesh size : 22mm, entrance round : 350mm) in Geo-je & Tong-young waters of Korea. On the first sea experiment, it was thought that suitable mesh size of spring-net-pot catching conger-eel over 35cm with decreasing the catches of conger-eel (Conger myriaster) below 35cm was 24mm. On the second sea experiment, commercial catches were crabs (Charybdis bimaculata), octopus minor (Octopus variabilis) and others including conger-eel, and catches proportion was 60% of total catches weights. There was no big difference for the monthly catches. Self-consumption catches were 9 species including conger-eel below 35cm holding 50% of catches in the side of weights. There were 40% of bycatches for the catches weights and 63% for catches numbers in the 22mm mesh size of spring-net-pot having entrance round over 140mm. It showed that 50% of catches weights were discarded.

• 한국자원식물학회지
• /
• 제19권4호
• /
• pp.521-523
• /
• 2006

도깨비고비 분화생산시에는 화분이 클수록 초장이 크고 엽수도 많았으며 엽장과 엽폭도 크게 나타났다. 도깨비고비는 화분크기 및 저면 관수 주기 모두 통계적 유의성이 인정되어 직경 $7{\sim}10cm$크기의 화분은 5일에 한번씩 저면 관수하는 것이 좋은 것으로 나타났다.

• 수산해양기술연구
• /
• 제48권1호
• /
• pp.1-9
• /
• 2012

For the optimal design of a shrimp pot to control the catch size and to reduce catch the small size shrimp, tank experiments were carried out to study the pot stability under water. Tank experiments were carried out to measure the drag with 4 kinds of model pots that have 50% selection on the individual of 25mm carapace length. The drag of each pot was measured every 10 times with changing the current speeds from 0.1m/s to 0.7m/s in 0.1m/s intervals and the pot attack angle from $0^{\circ}$ to $90^{\circ}$ in $15^{\circ}$ interval in a flume tank. The relation between the current speed and drag was presented. The stability of pot was estimated using the drag data and the friction data of Kim et al. (2008b). The results showed that, the drag was shown lower as small as the projected area of pot depending on the current speeds and angles. The model pots were showed to slide on the seabed in case of rock at the current speeds 0.35-0.38m/s and the possibility of turn over at the current speeds 0.77-0.89m/s. In conclusion, the stability of a shrimp pot showed more stable as the pot of the lower the height and the smaller projected area on current.

• 한국분말재료학회지
• /
• 제15권2호
• /
• pp.119-124
• /
• 2008

To increase pot life in the formulation mixed with bisphenol F epoxy resin, anhydride-based curing agent, and imidazole-based curing accelerator powders as a paste material for high-speed RFID chip bonding, size variation of the imidazole-based powders and a coating method of the powders were adopted in this study. In experiment with regard to the size variation, the pot life was not outstandingly increased. Through the idea using the coating method, however, the pot life was increased up to 4.25 times in comparison with the addition of initial imidazole-based powders. Consequently, successive bonding of RFID chip could be performed with very short time of 5sec using the suggested formulation having improved pot life.

• 수산해양기술연구
• /
• 제49권3호
• /
• pp.200-207
• /
• 2013

This paper presents the mesh selectivity of a net pot for common octopus Octopus minor for the sustainable resources management of common octopus. The filed experiments were carried out the total 10 times in the southern part of coastal sea in Korea from March to May in 2010 using net pots of five different mesh sizes (16, 18, 20, 22 and 26mm). The test of size selectivity, indicated a 50% selection value on the logistic master curve of 3.195, whereby 50% of individuals with a mantle size of approximately 70.3mm selected a mesh size of 22mm. Considering that 50% of common octopus entering sexual maturity have a mantle size of 70.6mm, the optimum mesh size should be equal to, or larger than 22mm.

• 수산해양기술연구
• /
• 제52권1호
• /
• pp.9-16
• /
• 2016

This study was conducted to analyze fishing capacity and bycatch by mesh size and entrance size of spring net pot conducted by water tank and field experiment. The water tank experiments were conducted by using traps with mesh size of 22 mm and entrance size of 120 mm and 140 mm, respectively in the water tank of NIFS. The field experiment was conducted using 5 kinds of spring net pot with mesh sizes of 20 mm, 22 mm, 35 mm and entrance size of 120 mm, 130 mm, 140 mm, 360 mm by coastal trap fishery vessel operating around the area of Geoje island. In the result of water tank experiments, the catch of conger eel was 1.5 times higher when using trap with entrance size of 140 mm than that of 120 mm. In the field experiment, when using same mesh size, the larger the entrance size, the higher amount of conger eel catch, bycatch and number of bycatch species. When using the same entrance size, the larger the mesh size, the lower amount of conger eel catch and number of bycatch species, whereas the amount of bycatch showed increasing trend.