• 대한치과보철학회지
• /
• 제28권2호
• /
• pp.91-108
• /
• 1990

The purpose of this study was to compare the maganitude of the discrepancies of the mounting errors in according to the states of dentitions, and to the superoinferior, anteroposterior, and rightleft driecetions. GROUP I. : Fourteen patients 22 to 26 years of age with a full complement of teeth, were used in the study. The criteria fro patient selection were a complete dentition, sparse restorarive treatment, and adequate posterior and anterior occlusan stops. And they had no sign and sympton at TMG area. GROUPII. : Eigth patients 37 to 62 years of age with bilateral free ends. The criteria for patient selection were Kennedy classification class 1 cases, and adequate posterior and anterior stops. And the opposite dentitions were a full complement of teeth. Irreversible hydrocolloid impresiion of each arch was taken of each patient. These were immediatel poured in stone and mounted on a Denar Mark II. Articulator with the arbitrary slidematic face-bow. With hand articulation th e mandibular cast was mounted to the maxillary cast in centric occlusion. Five types of interocclusal records were taken of each patient : (1) aluwax (2) baseplate wax; (3) znic oxide-eugenol pasts; (4) polyether (Ramitec); (5) modeling compound. All measurement of the five selected recording materials were compared with those of the hand-articulated full arch models in centric occlusion or maximum interdigitation. The results were as follows; 1. There were statistical differences in amount of devitation in according to the materials and the states of dentition. The amount of deviation of compound was the largest. 2. There were statistical differences in amount of deviation in complete dentition at all directions. The amount of diviation of compound was the largest. And at the right-left direction the amount of znic oxide-eugenol paste was larger than that of baseplate wax. 3. There was a statistical difference in amount of diviations in partial edentulous dentition at the superoinferior direction. The amount of deviation of compound was larger than that of znic oxide-eugenol paste. 4. There was as statistical difference in amount of deviations in partial edentulous dentition at the right-left direction. The amount of deviation of baseplate wax was larger that tnat of polyether. 5. There was not a statistical difference in amount of diviation in partial edentulous dentition at the anteroposterior direction.

• 대한치과보철학회지
• /
• 제56권3호
• /
• pp.218-226
• /
• 2018

부분 무치악 환자에게 소수의 임플란트를 전략적인 위치에 식립하여 추가적인 유지와 지지를 얻는 임플란트 보조 국소의치(Implant-assisted removable partial denture, IARPD)를 제작할 수 있다. 최근 이러한 임플란트 보조 국소의치로 치료한 여러 증례와 임상가이드라인을 보면 후방 무치악 부위에 임플란트를 식립하는 것이 추천된다. 그러나 실제 임상에서는 구치부의 심한 치조골 흡수나 해부학적 이유로 외과적 수술(상악동거상술, 골 이식술 등)이 부가적으로 필요한 경우가 많다. 이에 대해 후방의 무치악 부위는 가철성 국소의치로 수복하되, 소수의 치아가 잔존하는 전방 무치악 부위는 임플란트 고정성 보철물로 수복하여 지대주로 활용하는 치료방법이 대안으로 제시될 수 있다. 본 증례는 상악 구치부 치아의 상실과 잔존치열에 중등도 이상의 마모를 보이는 환자에 대한 증례로 상악 전방부에 3개의 임플란트를 식립하고 잔존하는 상악 전치부 자연치와 더불어 각각 써베이드 고정성 보철물을 제작하였으며 상악 후방연장 국소의치를 제작하였다. 그와 함께 손상된 하악 자연치는 고정성 보철물로 전악수복하였다. 이로써 감소된 수직고경 및 붕괴된 교합평면을 회복하여 기능적, 심미적으로 향상되었으며 지속적인 경과관찰 중이다. 본 증례를 통해 전방부 임플란트 써베이드 고정성 보철물과 후방연장 국소의치에 의한 보철치료 증례의 3년 경과관찰 결과를 보고하고자 한다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제26권6호
• /
• pp.644-651
• /
• 2000

In cases of severe alveolar bony resorption in the edentulous posterior maxillae, implant placement is limited anatomically due to maxillary sinus. If the ridge is atrophic, the various bone grafting methods are required for the ridge augmentation. But the result of the onlay grafting procedure is not always promising. On the posterior maxilla, maxillary sinus mucosa lifting and bone grafting into the sinus floor, subantral augmentation(SA) technique are recommended. Various SA procedures have been developed for implant installation. We perfer to simultaneous block bone graft and implant installation through the residual alveolar ridge into the grafted block bone to fix the grafted bone and to gain the primary stability of the installed fixture. When a sagittal skeletal discrepancy in present due to the severe alveolar bony resorption of the maxilla, the advancement of the maxilla by Le Fort I osteotomy simultaneously with installation of implant fixtures combined with sinus lifting and interpositional bone graft procedure can be indicated. We applied various SA techniques for implant installtion to the 46 edentulous posterior maxillae, and total 154 implants were installed at our department from 1992 to 1999. Various SA techniques were classified in detail and the indications of each techniques were discussed. The changes of residual bony height following SA procedure were studied. The results were as follows. 1. The SA procedure combined with bone graft and simultaneous fixture installation were performed in 41 cases, 126 fixtures were installed and 5 fixtures were removed out of them. Le Fort I osteotomy procedure combined with sinus lifting and interpositional bone graft simultaneous with fixture installation were performed in 5 cases. Total 28 fixtures were installed and 2 fixtures were removed so far. 2. Autogenous block bone graft into sinus floor were performed in 35 cases, autogenous particulated marrow cancellous bone(PMCB) graft in 9 cases, and demineralized human bone powder in 2 cases. The donor site for bone graft were anterior iliac bone in 39 cases, posterior iliac bone in 3 cases and mandibular symphysis in 1 case and mandibular ramus in 1 case. 3. In 9 cases with which SA procedure had been performed with the block bone graft, the change of pre- and postoperative residual bony height were measured using MPR(multiplanar reformatted)-CT. The mean residual bony height was 8.0mm preoperatively, 20.2mm at 6 months following up operation and we gained average 12.2mm alveolar bony height. So, we can recommend this one-stage subantral augmentation and fixture installation technique as a time conserving, safe and useful method for compromised posterior edentulous maxilla.

• 대한치과보철학회지
• /
• 제54권1호
• /
• pp.65-71
• /
• 2016

치아 교합면의 점진적인 마모는 나이가 들면서 진행되는 정상적인 과정이다. 그러나 과도한 마모는 병적인 치수 상태, 교합 부조화, 기능 장애 및 심미적인 문제를 가져온다. 치아 수복을 위한 공간 확보, 심미성 증진, 또는 교합관계를 수정하기 위해서는 수직고경 변경을 고려하여야 하는데 환자의 심미적 요구와 술자의 기능적 목표를 최소침습적으로 달성하는 것을 충족시키는 범위 내에서 수직고경을 결정하고 새로운 수직고경에 대한 적응 평가를 함께 이루어야 한다. 그리고 과피개 교합 문제는 단순히 피개 교합의 정도에 국한된 문제라기 보다는 전후방적인 교합 문제를 복합적으로 지니고 있는 경우가 많다. 이러한 고려사항을 생각해 보았을 때 근본적인 문제 해결을 위해서는 악골 및 치아의 전후방적인 관계 개선과 더불어 결손부의 적절한 수복이 뒤따라야 한다. 본 증례는 67세 남자 환자로 다수 치아 마모와 구치부 상실된 환자로 수직고경의 증가를 동반하여 하악 무치악 부위는 가철성 국소의치, 상하악 유치악 부위는 고정성 보철물로 수복을 하였으며, 이에 기능적, 심미적으로 만족스러운 결과를 얻었기에 증례를 보고하고자 한다.

• 한국동물학회지
• /
• 제6권1호
• /
• pp.15-20
• /
• 1963

The characteristics of the pharyngeal bones and their teeth in Korean Cyprinids fishes, as a rule, are summarized as follow : 1. The materials 13 genera and 17 species from Nak Dong River. 2. Breadth of bone about 2.8(Cyprinus carpio) to 4.9(Culter brevicauda) in bone length. Length of bone about 8.5(Carassius carassius ) to 20.2 (Pseudogobio esocinus ) in body length. Breadth of pitted surface about 66%(Carassius carassius) to 85%(Acanthorhodeus asmussi ) of breadth of bone. 3. The position and distinct ratio of anterior angle correlated. 4. Posterior limb always longer than anteriro, but posterior edentulous process not shorter than anterior's or equal. 5. Zacco platypus with pitted surface on anterior limb , but Z.temmincki without it. 6. Teeth one to three rowed in accordance with the differences of each genus : a. one rowed genera ..... Carassius , Pseudorasbora, Sarcocheilichthys (Sakiyae), Pungtungia, Acheilognathus, Acanthorhodeus. b. two rowed genera ........ Pseudogobio, Gnathopogon, Tribolodon. c. Three rowed genera .... Cyprinus, Hemibarbus, Zacco , Culter 7. Teeth of main (primary ) row with four or five teeth is symmetrized exceptive three genera (Tribolodon, Zacco, Culter). 8. Grinding surface and bill type correlated. 9. In Acheilognathus, A.Yamatsutae have one or two indistinct serration but each individual is unlike.

• Journal of Periodontal and Implant Science
• /
• 제36권4호
• /
• pp.891-900
• /
• 2006

Perforation of maxillary sinus is a common complication of implant placement in posterior maxilla. The purpose of this study was to evaluate the prognosis of sinus perforated implants placed in partially edentulous maxillae. Eighteen sinus perforated implants in 15 patients were examined for cumulative survival rate, radiographic preoperative bone level, and radiographic marginal bone level change. Twenty-two non-perforated implants in the same patients served as control. The results were as follows; 1. There was no statistically significant difference in cumulative survival rate between sinus perforated implants and non-perforated implants (P>0.05). 2. There was no statistically significant difference in the marginal bone level between sinus perforated implants and non-perforated implants (P>0.05). 3. There was no statistically significant difference in cumulative survival rate according to the preoperative bone level (P>0.05). These results suggests that perforation of maxillary sinus may not affect implant success in posterior maxillae.

• Imaging Science in Dentistry
• /
• 제46권1호
• /
• pp.39-45
• /
• 2016

The incidental finding of an enlarged mastoid foramen on the right posterior mastoid region of temporal bone is reported, together with a discussion of its clinical significance. A 67-year-old female underwent the pre-implant assessment of a maxillary left edentulous region. A cone-beam computed tomographic (CBCT) image was acquired and referred for consultation. Axial CBCT slices revealed a unilateral, well-defined, noncorticated, low-attenuation, transosseous defect posterior to the mastoid air cells in the right temporal bone. The borders of the osseous defect were smooth and continuous. No other radiographic signs suggestive of erosion or sclerosis were noted in the vicinity. The density within the defect was homogenous and consistent with a foramen and/or soft tissue. The patient's history and physical examination revealed no significant medical issues, and she was referred to a neuroradiologist for a second opinion. The diagnosis of an enlarged mastoid foramen was made and the patient was reassured.

• 대한치과보철학회지
• /
• 제51권3호
• /
• pp.183-189
• /
• 2013

연구 목적: 이 연구의 목적은 완전무치악 환자에서 임플란트 지지 고정성 하이브리드 수복물로 수복한 환자의 임상성적을 알아보는 것이다. 연구 대상 및 방법: 분당서울대병원에서 2003년 10월부터 2009년 11월 사이에 4-6개의 임플란트 지지 고정성 하이브리드 수복물로 수복을 하고 1년 이상 기능한 환자를 대상으로 하였다. 방사선 사진상에서 변연골 흡수량을 측정하고 성별, 해부학적 위치(상악 대 하악), 대합치, 하중시기, 식립 경사도에 따른 차이를 비모수 검정(Mann-Whitney U test) 하고, 외팔보의 길이에 따른 영향을 회귀분석하였으며 합병증을 조사하였다. 유의 수준P<.05로 검정하였다. 결과: 총 16명, 16개 수복물에서 84개의 임플란트의 평균 28개월 후의 골흡수량은 $0.53{\pm}0.39mm$였다. 환자의 성별, 해부학적 위치(상악 대 하악), 대합치, 하중시기에 따른 골흡수량의 유의차는 관찰되지 않았으며(P>.05) 회귀분석 결과 외팔보의 길이와 외팔보 인접 최후방 임플란트의 골흡수량 사이에도 유의성이 없었다(P>.05). 16명중11명의 환자에서 합병증이 발생하였으며 전장재 파절과 인공치 탈락이 가장 많았다. 결론: 짧은 기간의 후향적 연구라는 한계 내에서, 임플란트 지지 고정성 하이브리드 수복물의 평균 골흡수는 매우 적었지만 높은 빈도의 합병증 발생을 보였다. 외팔보 인접 최후방 임플란트의 경사와 관계 없이 외팔보 인접 최후방 임플란트보다 나머지 전방부 임플란트의 변연골 흡수량이 유의하게 컸다. 모든 증례의 외팔보 길이(< 17 mm)는 외팔보 인접 최후방 임플란트 변연골 흡수량에 영향을 주지 않았다.

• 구강회복응용과학지
• /
• 제17권4호
• /
• pp.283-305
• /
• 2001

The purpose of this study was to analyze the stress distribution of condylar regions and edentulous mandible with implant-supported cantilever prostheses on the certain conditions, such as amount of load, location of load, direction of load, fixation or non-fixation on the condylar regions. Three dimensional finite element analysis was used for this study. FEM model was created by using commercial software, ANSYS(Swanson, Inc., U.S.A.). Fixed model which was fixed on the condylar regions was modeled with 74323 elements and 15387 nodes and spring model which was sprung on the condylar regions was modeled with 75020 elements and 15887 nodes. Six Br${\aa}$nemark implants with 3.75 mm diameter and 13 mm length were incorporated in the models. The placement was 4.4 mm from the midline for the first implant; the other two in each quardrant were 6.5 mm apart. The stress distribution on each model through the designed mandible was evaluated under 500N vertical load, 250N horizontal load linguobuccally, buccal 20 degree 250N oblique load and buccal 45 degree 250N oblique load. The load points were at 0 mm, 10 mm, 20 mm along the cantilever prostheses from the center of the distal fixture. The results were as follows; 1. The stress distribution of condylar regions between two models showed conspicuous differences. Fixed model showed conspicuous stress concentration on the condylar regions than spring model under vertical load only. On the other hand, spring model showed conspicuous stress concentration on the condylar regions than fixed model under 250N horizontal load linguobuccally, buccal 20 degree 250N oblique load and buccal 45 degree 250N oblique load. 2. Fixed model showed stress concentration on the posterior and mesial side of working and balancing condylar necks but spring model showed stress concentration on the posterior and mesial side of working condylar neck and the posterior and lateral side of balancing condylar neck under vertical load. 3. Fixed model showed stress concentration on the posterior and lateral side of working condylar neck and the anterior and mesial side of balancing condylar neck but spring model showed stress concentration on the anterior sides of working and balancing condylar necks under horizontal load linguobuccally. 4. Fixed model showed stress concentration on the posterior side of working condylar neck and the posterior and lateral side of balancing condylar neck but spring model showed stress concentration on the anterior side of working condylar neck and the anterior and lateral side of balancing condylar neck under buccal 20 degree oblique load. 5. Fixed model showed stress concentration on the anterior and lateral side of working condylar neck and the posterior and mesial side of balancing condylar neck but spring model showed stress concentration on the anterior side of working condylar neck and the anterior and lateral side of balancing condylar neck under buccal 45 degree oblique load.. 6. The stress distribution of bone around implants between two models revealed difference slightly. In general, magnitude of Von Mises stress was the greatest at the bone around the most distal implant and the progressive decrease more and more mesially. Under vertical load, the stress values were similar between implant neck and superstructure vertically, besides the greatest on the distal side horizontally. 7. Under horizontal load linguobuccally, buccal 20 degree oblique load and buccal 45 degree oblique load, the stress values were the greatest on the implant neck vertically, and great on the labial and lingual sides horizontally. After all, it was considered that spring model was an indispensable condition for the comprehension of the stress distributions of condylar regions.

• Imaging Science in Dentistry
• /
• 제47권1호
• /
• pp.39-44
• /
• 2017

Purpose: Insufficient knowledge of the anatomy of the maxillary sinuses prior to sinus graft surgery may lead to perioperative or postoperative complications. This study sought to characterize the position of the posterior superior alveolar artery (PSAA) within the maxillary sinuses using cone-beam computed tomography (CBCT). Materials and Methods: A total of 300 patients with edentulous posterior maxillae, including 138 females and 162 males with an age range of 33-86 years, who presented to a radiology clinic between 2013 and 2015 were enrolled in this retrospective cross-sectional study. The distance from the inferior border of the PSAA to the alveolar crest according to the residual ridge classification by Lekholm and Zarb, the distance from the PSAA to the nasal septum and zygomatic arch, and the diameter and position of the PSAA were all assessed on patients' CBCT scans. The data were analyzed using the Mann-Whitney test and the t-test. Results: The PSAA was detected on the CBCT scans of 87% of the patients; it was located beneath the sinus membrane in 47% of cases and was intraosseous in 47% of cases. The diameter of the artery was between 1 and 2 mm in most patients (72%). The mean diameter of the artery was $1.29{\pm}0.39mm$, and the mean distances from the PSAA to the zygomatic arch, nasal septum, and alveolar crest were $22.59{\pm}4.89mm$, $26.51{\pm}3.52mm$, and $16.7{\pm}3.96mm$, respectively. Conclusion: The likelihood of detecting the PSAA on CBCT scans is high; its location is intraosseous or beneath the sinus membrane in most patients. Determining the exact location of the PSAA on CBCT scans preoperatively can help prevent it from being damaged during surgery.