• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.5
• /
• pp.91-96
• /
• 2018

The oleophobic property of surfaces modified with micro-post structures are investigated for a range of micro-post diameter ($11-23{\mu}m$) and pitch ($20-40{\mu}m$). The contact angle of an oil droplet on surfaces with various micro-post dimensions was calculated using the Cassie-Baxter model and did not show a good agreement with the measured contact angle. From measurement, the micro-post with diameter of $23{\mu}m$ and pitch of $32{\mu}m$ was found to have the highest contact angle ($134.3^{\circ}$).

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.10a
• /
• pp.341-344
• /
• 2008

Plastics is commonly used in consumer electronics because of it is high strength per unit mass and good productivity. But. using, transporting, and keeping of plastic component was happened post-deformation. As time goes by and temperature is changed, the post-deformation causes the problems of exterior design and performance. But, it is difficult to estimate the post-deformation by only thermal deformation analysis. Also, the estimation technique of the pest-deformation must be easily applied to product development and it should be reliable because development time of product is limited. In the paper. the process to predict the post deformation under cyclic thermal loadings was suggested. The process was applied to the real panel, and the deformation predicted by the analysis was compared with that of real test, which showed the possibility of applying the suggested process to predict the post deformation of plastic product under thermal loadings.

• BMB Reports
• /
• v.44 no.3
• /
• pp.147-157
• /
• 2011

The meiotic process from the primordial stage to zygote in female germ cells is mainly adjusted by post-transcriptional regulation of pre-existing maternal mRNA and post-translational modification of proteins. Several key proteins such as the cell cycle regulator, Cdk1/cyclin B, are post-translationally modified for precise control of meiotic progression. The second messenger (cAMP), kinases (PKA, Akt, MAPK, Aurora A, CaMK II, etc), phosphatases (Cdc25, Cdc14), and other proteins (G-protein coupled receptor, phosphodiesterase) are directly or indirectly involved in this process. Many proteins, such as CPEB, maskin, eIF4E, eIF4G, 4E-BP, and 4E-T, post-transcriptionally regulate mRNA via binding to the cap structure at the 5' end of mRNA or its 3' untranslated region (UTR) to generate a closed-loop structure. The 3' UTR of the transcript is also implicated in post-transcriptional regulation through an association with proteins such as CPEB, CPSF, GLD-2, PARN, and Dazl to modulate poly(A) tail length. RNA interfering is a new regulatory mechanism of the amount of mRNA in the mouse oocyte. This review summarizes information about post-transcriptional and post-translational regulation during mouse oocyte meiotic maturation.

• Journal of Information Technology Applications and Management
• /
• v.15 no.1
• /
• pp.203-224
• /
• 2008

The purpose of this study is to investigate the evaluation perspectives of IT business value and empirically analyze the differences of evaluation perspectives between ex ante evaluation and post implementation evaluation, and among various information system types. 4 evaluation perspectives which have been used in the previous studies and in the field of industry practices are financial, customer, internal process, and growth, which are based on the BSC model. Data of 98 information systems have been collected from 89 companies including manufacturers, banks, insurances, and stock trading companies. As results of multi-way MANOVA test, 3 out of 8 hypothesis have been accepted statistically. While the order of importance of 4 perspectives in ex ante evaluation is customer, financial, internal process, and growth, the order of post implementation evaluation appears to be much different : that is, internal process, customer, financial, and growth. These findings provide insights for both IT practitioners and researchers.

• International conference on construction engineering and project management
• /
• 2011.02a
• /
• pp.542-549
• /
• 2011

This research will attempt to reveal that private developers in the Malaysian construction industry have been practicing strategic partnering in their organizations. While the investigation was conducted using quantitative and qualitative approaches, this paper will only reveal results obtained from the questionnaire survey. Results from the questionnaire survey indicate that private developers in the Malaysian construction industry had implemented strategic partnering in their organizations. The elements of the partnering process, which are partnering formation, partnering application and partnering completion or reactivation were tested. The results show that all the elements of the partnering process have been exercised in their projects. Thus it can be surmised that strategic partnering has been practiced by private developers in the Malaysian construction industry.

• Journal of Powder Materials
• /
• v.25 no.4
• /
• pp.340-345
• /
• 2018

Additive manufacturing by electron beam melting is an affordable process for fabricating near net shaped parts of titanium and its alloys. 3D additive-manufactured parts have various kinds of voids, lack of fusion, etc., and they may affect crack initiation and propagation. Post process is necessary to eliminate or minimize these defects. Hot isostatic pressing (HIP) is the main method, which is expensive. The objective of this paper is to achieve an optimum and simple post heat treatment process without the HIP process. Various post heat treatments are conducted for the 3D-printed Ti-6Al-4V specimen below and above the beta transus temperature ($996^{\circ}C$). The as-fabricated EBM Ti-6Al-4V alloy has an ${\alpha}^{\prime}$-martensite structure and transforms into the ${\alpha}+{\beta}$ duplex phase during the post heat treatment. The fatigue strength of the as-fabricated specimen is 400 MPa. The post heat treatment at $1000^{\circ}C/30min/AC$ increases the fatigue strength to 420 MPa. By post heat treatment, the interior pore size and the pore volume fraction are reduced and this can increase the fatigue limit.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.3
• /
• pp.217-226
• /
• 2009

In this paper, we analyze process of implementing and successful enabler of Postal Logistics Integrated Information Systems(PostNet) through a case study on Korea Post. PostNet was integrated by considering contingently organizational integration (organizational structure redesign), strategical integration (business process reengineering), and technical integration(data integration, application integration, and integrated platform implementation). And also integration was implemented for supporting three aspects. PostNet has implication for advanced integration with business mission and operational efficiency by comparing integration with physical level and hardware level. Korea Post has the biggest logistics network, organization, and service in logistics industry area. The results of this paper will suggest theoretical framework for the future information system integration, and will be utilized as a practical guideline for the information system integration.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.2
• /
• pp.114-118
• /
• 2009

PVA (polyvinyl alcohol) brush cleaning method is a typical cleaning method for semiconductor cleaning process especially post-CMP cleaning. PVA brush contacts with the wafer surface and abrasive particle, generating the contact rotational torque of the brush, which is the removal mechanism. The brush rotational torque can overcome theoretically the adhesion force generated between the abrasive particle and wafer by zeta potential. However, after CMP (chemical mechanical polishing) process, many particles remained on the wafer because the brush was contaminated in previous post-CMP cleaning step. The abrasive particle on the brush redeposits to the wafer. The level of the brush contamination increased according to the cleaning run time. After cleaning the brush, the level of wafer contamination dramatically decreased. Therefore, the brush cleanliness effect on the cleaning performance and it is important for the brush to be maintained clearly.

• Proceedings of the Korea Technology Innovation Society Conference
• /
• 2012.05a
• /
• pp.207-225
• /
• 2012

한국이 탈추격에 진입하였으며 이에 대응한 새로운 기술혁신전략이 필요하다고 제기되고 있는데, 본 연구에서는 이를 산업연관표에 기반한 산업별 생산방식 변화 등의 분석을 통하여 확인하며, 산업별 인력 구성의 변화를 중심으로 새로운 기술혁신전략을 모색하였다. 인력양성과 활용의 측면을 중심으로 한 학습과정(leaning process)이 R&D 등 혁신노력과 성공적으로 조응될 때 기대한 혁신성과가 실현될 수 있음을, 28산업분류 수준에서 대학 전공의 일에서의 유용성과 R&D투입간 조응성을 통하여 분석하고, 이러한 사항이 국가수준의 혁신정책에 통합되어야 함을 제시하였다.

• Food Science of Animal Resources
• /
• v.41 no.5
• /
• pp.802-815
• /
• 2021

To investigate the effect of postmortem phases on lamb meat quality, the physicochemical quality, microstructure and water mobility of oyster cut, short loin, knuckle and silverside muscles from Small-Tail Han sheep were evaluated in the pre-rigor, rigor mortis and post-rigor phases. Pre-rigor lamb meat had higher pH and water holding capacity (WHC), whereas lower CIE L^*, b^*, hue angle values than rigor mortis and post-rigor meat (p<0.05). The Warner-Bratzler shear force (WBSF) values were higher in rigor mortis short loin and silverside than their pre-rigor and post-rigor counterparts, pre-rigor short loin had lower WBSF value than its post-rigor counterpart (p<0.05). Muscle fibers shrank laterally and longitudinally during the onset of rigor mortis. Rigor mortis and postrigor lamb meat exhibited wide I-bands, dark A-bands, short sarcomeres and large inter-myofibrillar spaces. The shift of immobilized water to free water and repulsion from the intra-myofibrillar space to the extracellular space result in the increase of water loss in rigor mortis and post-rigor lamb meat. The results of the principal component analysis (PCA) indicated that rigor mortis and post-rigor lamb meat had similar quality properties but different from pre-rigor lamb meat. In conclusion, the lamb meat in the pre-rigor phase had good tenderness, color and WHC. The results of this research could provide some theoretical references for lamb meat production and processing.