• Nuclear Engineering and Technology
• /
• v.54 no.6
• /
• pp.1935-1946
• /
• 2022

The investigations of the coated-particles of nuclear fuel samples are carried out in three stages: front-end, irradiation in the reactor core, and post-irradiation examination. The front-end stage is the initial analysis of the failures rates of produced samples before they are placed in the reactor core. The purpose of the verification is to prepare the particles for an experiment that will determine the degree of damage to the coated particles at each stage. Before starting experiments with the samples, they must be properly prepared. Polishing the samples in order to uncover the inner layers is an important, initial experimental step. The authors of this paper used a novel way to prepare samples for testing - by applying an ion polisher. Mechanical polishing used frequently for sample preparations generates additional mechanical damages in the studied fuel particle, thus directly affecting the experimental results. The polishing methods were compared for three different coated particles using diagnostic methods such as Raman spectroscopy, scanning electron microscopy, and confocal laser scanning microscopy. Based on the obtained results, it was concluded that the ion polishing method is better because the level of interference with the structures of the individual layers of the tested samples is much lower than with the mechanical method. The same technique is used for the fuel particles undergone ion implantation simulating radiation damage that can occur in the reactor core.

• Nuclear Engineering and Technology
• /
• v.53 no.4
• /
• pp.1049-1078
• /
• 2021

The review summarizes the published data on the widely applied electron-beam, laser-beam, as well as resistance upset, projection, and spot welding of zirconium alloys for nuclear applications. It provides the results of their analysis to identify common patterns in this area. Great attention has been paid to the quality requirements, the edge preparation, up-to-date equipment, process parameters, as well as post-weld treatment and processing. Also, quality control and weld repair methods have been mentioned. Finally, conclusions have been drawn about a significant gap between the capabilities of advanced welding equipment to control the microstructure and, accordingly, the properties of welded joints of the zirconium alloys and existing algorithms that enable to realize them in the nuclear industry. Considering the ever-increasing demands on the high-burnup accident tolerant nuclear fuel assemblies, great efforts should be focused on the improving the welding procedures by implementing predefined heat input cycles. However, a lot of research is required, since the number of possible combinations of the zirconium alloys, designs and dimensions of the joints dramatically exceeds the quantity of published results on the effect of the welding parameters on the properties of the welds.

• Nuclear Engineering and Technology
• /
• v.55 no.5
• /
• pp.1791-1801
• /
• 2023

The multi-physics coupled methodologies that have been widely used to analyze the complex process occurring in nuclear reactors have also been used to the R&D of numerical reactors. The advancement in the field of computer technology has helped in the development of these methodologies. Herein, we report the integration of ADPRES code and RELAP5 code into the SALOME-ICoCo framework to form a multi-physics coupling platform. The platform exploits the supervisor architecture, serial mode, mesh one-to-one correspondence and explicit coupling methods during analysis, and the uncertainty analysis tool URANIE was used. The correctness of the platform was verified through the NEACRP-L-335 benchmark. The results obtained were in accordance with the reference values. The platform could be used to accurately determine the power peak. In addition, design margins could be gained post uncertainty analysis. The initial power, inlet coolant temperature and the mass flow of assembly property significantly influence reactor safety during the rod ejections accident (REA).

• Proceedings of the Korea Information Processing Society Conference
• /
• 2023.05a
• /
• pp.615-617
• /
• 2023

In recent years, the growing popularity of dogs due to the benefits they bring their owners has contributed to the increase of the number of dogs raised. For owners, it is their responsibility to ensure their dogs' health and safety. However, it is challenging for them to continuously monitor their dogs' activities, which are important to understand and guarantee their wellbeing. In this work, we introduce a camera-based monitoring system to help owners automatically monitor their dogs' activities. The system receives sequences of RGB images and uses YOLOv7 to detect the dog presence, and then applies post-processing to perform dog-centered image cropping on each input sequence. The optical flow is extracted from each sequence, and both sequences of RGB and flow are input to a two-stream EfficientNet to extract their respective features. Finally, the features are concatenated, and a bi-directional LSTM is utilized to retrieve temporal features and recognize the activity. The experiments prove that our system achieves a good performance with the F-1 score exceeding 0.90 for all activities and reaching 0.963 on average.

• Nuclear Engineering and Technology
• /
• v.56 no.1
• /
• pp.114-122
• /
• 2024

Irradiation-induced defects and the precipitates in the wrapper material of the Indian Fast Breeder Test Reactor (FBTR), SS 316 are analyzed using the synchrotron source-based Angle Dispersive X-Ray Diffraction (ADXRD) technique with X-rays of energy 17.185 keV (wavelength ~0.72146 Å). The differences and similarities in the high displacement damage samples as a function of dpa (displacement per atom) and dpa rate in the range of 2.9 × 10^-7- 9 × 10^-7 dpa/s are studied. Ferrite and M₂₃C₆ are commonly observed in the present set of high displacement damage 40-74 dpa SS 316 samples irradiated at temperatures in the range of 400-483 ℃. Also, the dislocation density has increased as a function of the irradiation dose. The X-ray diffraction peak profile parameters quantified such as peak shift and asymmetry show that the irradiation-induced defects are sensitive to the dpa rate-irradiation temperature combinations. The increase in yield strength as a function of displacement damage is also correlated to the dislocation density.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.1
• /
• pp.74-81
• /
• 2010

The effects of different levels of natural clay enterosorbent on the growth, nutrient availability, and genital organs of post-weaning female pigs fed with an addition of zearalenone (ZEA) were investigated in the study. A total of thirty-five post-weaning gilts ($L{\times}Y{\times}D$) with an average body weight of 12.36${\pm}$1.46 kg were used in the test. The gilts were raised individually in metabolism cages and fed a corn-soybean meal-whey basal diet with an addition of 0 or 1 mg/kg of ZEA for 24 d with four levels of natural clay enterosorbent added in the feed. The treatments were: i) control; ii) control+2.5 g/kg clay; iii) control+1 mg/kg ZEA; iv) control+1 mg/kg ZEA+1.25 g/kg clay; v) control+1 mg/kg ZEA+2.5 g/kg clay; vi) control+1 mg/kg ZEA+5.0 g/kg clay; vii) control+1 mg/kg ZEA +10 g/kg clay. Pigs fed diets contaminated with additional purified ZEA had significantly reduced apparent digestibility of crude protein (CP), gross energy (GE) and apparent metabolic rate of GE (ME/GE, p<0.05) without changes of net protein utilization (NPU, p>0.05). Final body weight, average daily gain (ADG), average daily feed intake (ADFI), vulva length, vulva width, vulva area, relative weights of genital organ and proliferative changes of the ovary tissues in gilts fed ZEA-contaminated diet were increased (p<0.05) compared to the gilts fed the control diet. Addition of natural clay enterosorbent in the ZEA-contaminated diet showed a positive protection effect on ZEA feeding, and the protection was increased linearly or quadratically as clay content increased. However, in pigs fed a diet with clay alone at 2.5 g/kg level there was no significant impact (p>0.05) on all the parameters as compared to the control. It is suggested that feeding ZEA at about 1.0 mg/kg for 24 days might result in a deleterious effect in pigs, and addition of 5 or 10 g clay enterosorbent per kg diet can effectively neutralize the detrimental effects of the ZEA feeding.

• Korean Journal of Ichthyology
• /
• v.28 no.2
• /
• pp.110-115
• /
• 2016

This study was conducted in order to investigate the growth and morphological development of Cypselurus hiraii larvae and to obtain basic data for taxonomic research. Specimens for this study were collected using a scoop net (aperture Ø60 cm) at the Geomun Island in Yeosu-si, Jollanam-do in July and August of 2013, and the mean water temperature was $20.6{\pm}1.84^{\circ}C$ and the mean salinity was $32.1{\pm}0.46$‰ during the collection. In post-larvae of total length 9.58~9.69 mm (average $9.63{\pm}0.04mm$, n=5), the mouth was opened, and the maxilla was shorter than the mandible. The length of the dorsal fin did not exceed that of the ventral fin, and the dorsal fin was on the same line as that of the ventral fin. In post-larvae of total length 18.0~18.5 mm (average $18.2{\pm}0.22mm$, n=5), with the growth accelerated, the pectoral fin was developed broadly and their caudal fin was differentiated into the heterocercal tail. These characteristics suggest the development of swimming ability and resultant active feeding activities. In post-larvae of total length 22.4~23.0 mm (average $22.7{\pm}0.21mm$, n=5), striped melanophores deposited in the pectoral fin, and small spot-like melanophores expanded in the processes formed on the mandible. The dorsal and anal fins were on the same line, and the anal fin was situated behind the dorsal fin.

• The Korean Journal of Pain
• /
• v.22 no.2
• /
• pp.151-157
• /
• 2009

Background: We hypothesized that if a fluoroscopic image of the lumbar sympathetic ganglion block (LSGB) showed the spread patterns of contrast at both the L2/3 and L4/5 disc areas, then this would demonstrate a more profound blockade effect because the spread patterns are close to sympathetic ganglia. In addition, we compared the effects of LSGB and transforaminal epidural steroid injection (TFESI) for the patients suffering with spinal stenosis. Methods: Eighty patients were divided into two groups (Group S: the patients treated with TFESI, Group L: the patients treated with LSGB). The patients of group L were classified into three groups (groups A, B and, C) according to their contrast spread pattern. The preblock and postblock temperature difference between the ipsilateral and contralateral great toe ($DT^{pre}$, $DT^{post}$, $^{\circ}C$), and the DTnet were calculated as follows. $DT^{net}$ = $DT^{post}$ - $DT^{pre}$. Results: Both group showed a significant reduction of the visual analogue score (VAS) and the Oswestry disability index (ODI) score. Only the patients of group L showed a significant increase of their walking distance (WD). Group A showed the most significant changes in the $DT^{post}$ ($6.1{\pm}1.2^{\circ}C$, P = 0.021), and the DTnet ($6.0{\pm}1.0^{\circ}C$, p = 0.023), as compared to group C. Conclusions: LSGB showed a similar effect on the VAS, and ODI, and a significant effect, on WD, compared with TFESI. Group A showed a significant sympatholytic effect, as compared to group C.

• Nuclear Engineering and Technology
• /
• v.56 no.1
• /
• pp.106-113
• /
• 2024

Understanding the tritium release and retention behavior of candidate tritium breeder materials is crucial for breeder blanket design. Recently, a melt spraying process was developed to prepare Li₄SiO₄ pebbles, which were subsequently subjected to the in-pile tritium production and extraction platform in China Mianyang Research Reactor (CMRR) to investigate their in-situ tritium release behavior and irradiation performance. The results demonstrate that HT is the main tritium release form, and adding hydrogen to the purge gas reduces tritium retention while increasing the HT percent in the purge gas. Post-irradiation experiments reveal that the irradiated pebbles darken in color and their grains swell, but the mechanical properties remain largely unchanged. It is concluded that the tritium residence time of Li₄SiO₄ made by melt spraying method at 467 ℃ is approximately 23.34 h. High-density Li₄SiO₄ pebbles exhibit tritium release at relatively low temperatures (<600 ℃) that is mainly controlled by bulk diffusion. The diffusion coefficient at 525 ℃ and 550 ℃ is 1.19 × 10^-11 cm²/s and 5.34 × 10^-11 cm²/s, respectively, with corresponding tritium residence times of 21.3 hours and 4.7 hours.

• Management & Information Systems Review
• /
• v.22
• /
• pp.137-165
• /
• 2007

It seems high time to increase productivity by adopting e-business to overcome challenges posed by both external factors including the appreciation of Korean won, oil hikes and fierce global competition and domestic issues represented by disparities between large corporations and small and medium enterprises (SMEs), Seoul metropolitan and local cities, and export and domestic demand all of which weaken future growth engines in the Korean economy. The demands of the globalization era are for innovative changes in businessprocess and industrial structure aiming for creating new values. To this end, e-business is expected to play a core role in the sophistication of the Korean economy through new values and innovation. In order to examine business performance in e-business-adopting industries, this study analyzed the home shopping industry by closely looking into the financial ratios including the ratio of net profit to sales, the ratio of operation income to sales, the ratio of gross cost to sales cost, the ratio of gross cost to selling, general and administrative (SG&A) expense, and return of investment (ROI). This study, for best outcome, referred to corporate financial statements as a main resource to calculate financial ratios by utilizing Data Analysis, Retrieval and Transfer System (DART) of the Financial Supervisory Service, one of the Korea's financial supervisory authorities. First of all, the result of the trend analysis on the ratio of net profit to sales is as following. CJ Home Shopping has registered a remarkable increase in its ratio of net profit rate to sales since 2002 while its competitors find it hard to catch up with CJ's stunning performances. This is partly due to the efficient management compared to CJ's value of capital. Such significance, if the current trend continues, will make the front-runner assume the largest market share. On the other hand, GS Home Shopping, despite its best organized system and largest value of capital among others, lacks efficiency in management. Second of all, the result of the trend analysis on the ratio of operation income to sales is as following. Both CJ Home Shopping and GS Home Shopping have, until 2004, recorded similar growth trend. However, while CJ Home Shopping's operating income continued to increase in 2005, GS Home Shopping observed its operating income declining which resulted in the increasing income gap with CJ Home Shopping. While CJ Home Shopping with the largest market share in home shopping industryis engaged in aggressive marketing, GS Home Shopping due to its stability-driven management strategies falls behind CJ again in the ratio of operation income to sales in spite of its favorable management environment including its large capital. Companies in the Group B were established in the same year of 2001. NS Home Shopping was the first in the Group B to shift its loss to profit. Woori Home Shopping has continued to post operating loss for three consecutive years and finally was sold to Lotte Group in 2007, but since then, has registered a continuing increase in net income on sales. Third of all, the result of the trend analysis on the ratio of gross cost to sales cost is as following. Since home shopping falls into sales business, its cost of sales is much lower than that of other types of business such as manufacturing industry. Since 2002 in gross costs including cost of sales, SG&A expense, and non-operating expense, cost of sales turned out to have remarkably decreased. Group B has also posted a notable decline in the same sector since 2002. Fourth of all, the result of the trend analysis on the ratio of gross cost to SG&A expense is as following. Due to its unique characteristics, the home shopping industry usually posts ahigh ratio of SG&A expense. However, more than 80% of SG&A expense means the result of lax management and at the same time, a sharp lower net income on sales than other industries. Last but not least, the result of the trend analysis on ROI is as following. As for CJ Home Shopping, the curve of ROI looks similar to that of its investment on fixed assets. As it turned out, the company's ratio of fixed assets to operating income skyrocketed in 2004 and 2005. As far as GS Home Shopping is concerned, its fixed assets are not as much as that of CJ Home Shopping. Consequently, competition in the home shopping industry, at the moment, is among CJ, GS, Hyundai, NS and Woori Home Shoppings, and all of them need to more thoroughly manage their costs. In order for the late-comers of Group B and other home shopping companies to advance further, the current lax management should be reformed particularly on their SG&A expense sector. Provided that the total sales volume in the Internet shopping sector is projected to grow over 20 trillion won by the year 2010, it is concluded that all the participants in the home shopping industry should put strategies on efficient management on costs and expenses as their top priority rather than increase revenues, if they hope to grow even further after 2007.