• Journal of Hospice and Palliative Care
• /
• v.14 no.1
• /
• pp.28-33
• /
• 2011

Purpose: Recognition of impending death is crucial not only for efficient communication with the caregiver of the patient, but also determination of the time to refer to a separate room. Current studies simply list the events 'that have already occurred' around 48 hours before the death. This study is to analyze the predictability of each event by comparing the time length from 'change' to death. Methods: Subjects included 160 patients who passed away in a palliative care unit in Incheon. The analysis was limited to 80 patients who had medical records for the last week of their lives. We determined 9 symptoms and 8 signs, and established the standard of 'significant change' of each event before death. Results: The most common symptom was increased sleeping (53.8%) and the most common sign was decreased blood pressure (BP) (87.5%). The mean time to death within 48 hours was 46.8% in the case of resting dyspnea, 13.6% in the ease of low oxygen saturation, and 36.9% in the case of decreased BP. The symptom(s) which had the highest positive predictive value (PV) for death within 48 hours was shown to be resting dyspnea (83%), whereas the combination of resting dyspnea and confusion/delirium (65%) had the highest negative PV. As for the most common signs before death within 48 hours, the positive PVs were more than 95%, and the negative PV was the highest when decreased BP and low oxygen saturation were combined. The difference in survival patterns between symptoms and signs was significant. Conclusion: The most reliable symptoms to predict the impending death are resting dyspnea and confusion/delirium, and decline of oxygen saturation and BP are the reliable signs to predict the event.

• Journal of Korean Academy of Nursing
• /
• v.22 no.1
• /
• pp.49-67
• /
• 1992

Most hospitalized children will experience physical pain as well as psychological distress. Preschool children's pain perception related to painful procedures can increase due to elevated anxiety and fear because they do not have understanding logical of their disease and hospitalization. In particular, they are distressed about needle - related procedures which are feared because they are seen to be a cause of bodily damage. This descriptive study attempted to identify pain perception levels in preschool children and their mothers. A self-reporting measurement and behavioral observation were used to collect the data. A total of 25 hospitalized preschool children and their mothers were investigated and data were collected about 60 painful procedures. Data collection was carried out by the researcher and two trained investigators from November first to December tenth. Three insruments were used to collect the data : Faces Pain Rating Scale(FPRS) developed by Beyer was used to measure the degree of preschool children's pain perception about painful procedures. The Visual Analogue Scale(VAS) devised by Huskisson was used to assess the degree of mothers' pain perception about their children's painful procedures. A Pain Behavioral Checklist based on the Procedure Behavior Check List by LeBaron and Zelter and modified by the researcher was used to observe behaviors of preschool children, their mothers, and nurses when the painful procedures took place. The data were analyzed by an SPSS program, and were tested using real numbers, percentages, Pearson correlation coefficient, t-test, and ANOVA. The results of this study are as follows : 1. Of all the painful procedures, the mean score for the FPRS for the preschool children's pain perception was 4.02 points, and the mean score for the VAS of mothers' pain perception was 10.92 points. 2. A Positive correlation which was statistically significant was found between the pain perception of preschool children and their mothers (r＝.53, p＜.01). that is, the higher the children's pain perception was, the higher their mothers' pain perception was. 3. The characteristics of the painful procedures related with children's pain perception as follows : The type of painful procedure was found to be statistically significant (F＝23.44, p＜.01), Among the three procedures Ⅳ starting was found to be perceived as the most painful procedures to the children. The greater the number of times that the procedure had been done, the higher the pain perception was (F＝4.44, p＜.01), and the longer the duration of the procedure, the higher the pain perception wa(r＝.30, p＜.05). Pain perception in the treatment room was higher than in the children's room(t＝6.30, ＜.01), pain perception in the mother's presence was the higher than when the mother was not present (t＝2.91, p＜.01). 4. The characteristics of the painful procedures related with the mothers' pain perception as follows : The type of painful procedure was found to be statistically significant(F＝6.01, p＜.01). Among the three procedures Ⅳ sampling was found to be perceived as the most painful procedures to the mothers. The greater the number of times that the procedure had been done, the higher the pain perception was (F＝5.95, p＜.01), and the longer the duration of the procedure, the higher the pain perception was (r＝.31, p＜.05). Pain perception in the treatment room was higher than in the children's room (t＝3.51, p＜.01), but pain perception in the mother's presence showed statistically significant no difference. 5. Of all of the 19 children's behaviors during the painful procedures, the most frequent behaviors observed Were as follows in order of frequency “crying”, “screamirig”, “facial grimacing”, “physical resistance”, Of all of the nine methers' behaviors, the most frequent by observed in “console children”, “hold children”, “applaud children”, Of all of the 11 nurses' behaviors during the painful procedures, the mast frequent in order were “smiling”, “physical restraint”, “console children”, “praise children”. 6. A positive correlation between children's and mothers' pain perception and children's behaviors was found to be statistically significant (r＝.65, p＜.01, r＝67, p＜.01). Also the relationship between children's and mothers' pain percertion, and mothers' behavior was found to be statistically significant (r＝.57, p＜. 01, 4＝.60, p＜.01). The relationship between children's pain perception and nurses' behaviors was also found to be statistically significant (r＝.46, p＜.01), but there was difference between mothers' pain perception and nurses' behaviors.

• Asia pacific journal of information systems
• /
• v.21 no.1
• /
• pp.103-122
• /
• 2011

Recently, numerous documents have been made available electronically. Internet search engines and digital libraries commonly return query results containing hundreds or even thousands of documents. In this situation, it is virtually impossible for users to examine complete documents to determine whether they might be useful for them. For this reason, some on-line documents are accompanied by a list of keywords specified by the authors in an effort to guide the users by facilitating the filtering process. In this way, a set of keywords is often considered a condensed version of the whole document and therefore plays an important role for document retrieval, Web page retrieval, document clustering, summarization, text mining, and so on. Since many academic journals ask the authors to provide a list of five or six keywords on the first page of an article, keywords are most familiar in the context of journal articles. However, many other types of documents could not benefit from the use of keywords, including Web pages, email messages, news reports, magazine articles, and business papers. Although the potential benefit is large, the implementation itself is the obstacle; manually assigning keywords to all documents is a daunting task, or even impractical in that it is extremely tedious and time-consuming requiring a certain level of domain knowledge. Therefore, it is highly desirable to automate the keyword generation process. There are mainly two approaches to achieving this aim: keyword assignment approach and keyword extraction approach. Both approaches use machine learning methods and require, for training purposes, a set of documents with keywords already attached. In the former approach, there is a given set of vocabulary, and the aim is to match them to the texts. In other words, the keywords assignment approach seeks to select the words from a controlled vocabulary that best describes a document. Although this approach is domain dependent and is not easy to transfer and expand, it can generate implicit keywords that do not appear in a document. On the other hand, in the latter approach, the aim is to extract keywords with respect to their relevance in the text without prior vocabulary. In this approach, automatic keyword generation is treated as a classification task, and keywords are commonly extracted based on supervised learning techniques. Thus, keyword extraction algorithms classify candidate keywords in a document into positive or negative examples. Several systems such as Extractor and Kea were developed using keyword extraction approach. Most indicative words in a document are selected as keywords for that document and as a result, keywords extraction is limited to terms that appear in the document. Therefore, keywords extraction cannot generate implicit keywords that are not included in a document. According to the experiment results of Turney, about 64% to 90% of keywords assigned by the authors can be found in the full text of an article. Inversely, it also means that 10% to 36% of the keywords assigned by the authors do not appear in the article, which cannot be generated through keyword extraction algorithms. Our preliminary experiment result also shows that 37% of keywords assigned by the authors are not included in the full text. This is the reason why we have decided to adopt the keyword assignment approach. In this paper, we propose a new approach for automatic keyword assignment namely IVSM(Inverse Vector Space Model). The model is based on a vector space model. which is a conventional information retrieval model that represents documents and queries by vectors in a multidimensional space. IVSM generates an appropriate keyword set for a specific document by measuring the distance between the document and the keyword sets. The keyword assignment process of IVSM is as follows: (1) calculating the vector length of each keyword set based on each keyword weight; (2) preprocessing and parsing a target document that does not have keywords; (3) calculating the vector length of the target document based on the term frequency; (4) measuring the cosine similarity between each keyword set and the target document; and (5) generating keywords that have high similarity scores. Two keyword generation systems were implemented applying IVSM: IVSM system for Web-based community service and stand-alone IVSM system. Firstly, the IVSM system is implemented in a community service for sharing knowledge and opinions on current trends such as fashion, movies, social problems, and health information. The stand-alone IVSM system is dedicated to generating keywords for academic papers, and, indeed, it has been tested through a number of academic papers including those published by the Korean Association of Shipping and Logistics, the Korea Research Academy of Distribution Information, the Korea Logistics Society, the Korea Logistics Research Association, and the Korea Port Economic Association. We measured the performance of IVSM by the number of matches between the IVSM-generated keywords and the author-assigned keywords. According to our experiment, the precisions of IVSM applied to Web-based community service and academic journals were 0.75 and 0.71, respectively. The performance of both systems is much better than that of baseline systems that generate keywords based on simple probability. Also, IVSM shows comparable performance to Extractor that is a representative system of keyword extraction approach developed by Turney. As electronic documents increase, we expect that IVSM proposed in this paper can be applied to many electronic documents in Web-based community and digital library.

• Journal of Intelligence and Information Systems
• /
• v.26 no.2
• /
• pp.27-42
• /
• 2020

Traditional companies with offline stores were unable to secure large display space due to the problems of cost. This limitation inevitably allowed limited kinds of products to be displayed on the shelves, which resulted in consumers being deprived of the opportunity to experience various items. Taking advantage of the virtual space called the Internet, online shopping goes beyond the limits of limitations in physical space of offline shopping and is now able to display numerous products on web pages that can satisfy consumers with a variety of needs. Paradoxically, however, this can also cause consumers to experience the difficulty of comparing and evaluating too many alternatives in their purchase decision-making process. As an effort to address this side effect, various kinds of consumer's purchase decision support systems have been studied, such as keyword-based item search service and recommender systems. These systems can reduce search time for items, prevent consumer from leaving while browsing, and contribute to the seller's increased sales. Among those systems, recommender systems based on association rule mining techniques can effectively detect interrelated products from transaction data such as orders. The association between products obtained by statistical analysis provides clues to predicting how interested consumers will be in another product. However, since its algorithm is based on the number of transactions, products not sold enough so far in the early days of launch may not be included in the list of recommendations even though they are highly likely to be sold. Such missing items may not have sufficient opportunities to be exposed to consumers to record sufficient sales, and then fall into a vicious cycle of a vicious cycle of declining sales and omission in the recommendation list. This situation is an inevitable outcome in situations in which recommendations are made based on past transaction histories, rather than on determining potential future sales possibilities. This study started with the idea that reflecting the means by which this potential possibility can be identified indirectly would help to select highly recommended products. In the light of the fact that the attributes of a product affect the consumer's purchasing decisions, this study was conducted to reflect them in the recommender systems. In other words, consumers who visit a product page have shown interest in the attributes of the product and would be also interested in other products with the same attributes. On such assumption, based on these attributes, the recommender system can select recommended products that can show a higher acceptance rate. Given that a category is one of the main attributes of a product, it can be a good indicator of not only direct associations between two items but also potential associations that have yet to be revealed. Based on this idea, the study devised a recommender system that reflects not only associations between products but also categories. Through regression analysis, two kinds of associations were combined to form a model that could predict the hit rate of recommendation. To evaluate the performance of the proposed model, another regression model was also developed based only on associations between products. Comparative experiments were designed to be similar to the environment in which products are actually recommended in online shopping malls. First, the association rules for all possible combinations of antecedent and consequent items were generated from the order data. Then, hit rates for each of the associated rules were predicted from the support and confidence that are calculated by each of the models. The comparative experiments using order data collected from an online shopping mall show that the recommendation accuracy can be improved by further reflecting not only the association between products but also categories in the recommendation of related products. The proposed model showed a 2 to 3 percent improvement in hit rates compared to the existing model. From a practical point of view, it is expected to have a positive effect on improving consumers' purchasing satisfaction and increasing sellers' sales.

• Journal of Intelligence and Information Systems
• /
• v.22 no.3
• /
• pp.45-69
• /
• 2016

Recently, sentiment analysis using open Internet data is actively performed for various purposes. As online Internet communication channels become popular, companies try to capture public sentiment of them from online open information sources. This research is conducted for the purpose of analyzing pulbic sentiment of Korean Top-10 companies using a multi-categorical sentiment lexicon. Whereas existing researches related to public sentiment measurement based on big data approach classify sentiment into dimensions, this research classifies public sentiment into multiple categories. Dimensional sentiment structure has been commonly applied in sentiment analysis of various applications, because it is academically proven, and has a clear advantage of capturing degree of sentiment and interrelation of each dimension. However, the dimensional structure is not effective when measuring public sentiment because human sentiment is too complex to be divided into few dimensions. In addition, special training is needed for ordinary people to express their feeling into dimensional structure. People do not divide their sentiment into dimensions, nor do they need psychological training when they feel. People would not express their feeling in the way of dimensional structure like positive/negative or active/passive; rather they express theirs in the way of categorical sentiment like sadness, rage, happiness and so on. That is, categorial approach of sentiment analysis is more natural than dimensional approach. Accordingly, this research suggests multi-categorical sentiment structure as an alternative way to measure social sentiment from the point of the public. Multi-categorical sentiment structure classifies sentiments following the way that ordinary people do although there are possibility to contain some subjectiveness. In this research, nine categories: 'Sadness', 'Anger', 'Happiness', 'Disgust', 'Surprise', 'Fear', 'Interest', 'Boredom' and 'Pain' are used as multi-categorical sentiment structure. To capture public sentiment of Korean Top-10 companies, Internet news data of the companies are collected over the past 25 months from a representative Korean portal site. Based on the sentiment words extracted from previous researches, we have created a sentiment lexicon, and analyzed the frequency of the words coming up within the news data. The frequency of each sentiment category was calculated as a ratio out of the total sentiment words to make ranks of distributions. Sentiment comparison among top-4 companies, which are 'Samsung', 'Hyundai', 'SK', and 'LG', were separately visualized. As a next step, the research tested hypothesis to prove the usefulness of the multi-categorical sentiment lexicon. It tested how effective categorial sentiment can be used as relative comparison index in cross sectional and time series analysis. To test the effectiveness of the sentiment lexicon as cross sectional comparison index, pair-wise t-test and Duncan test were conducted. Two pairs of companies, 'Samsung' and 'Hanjin', 'SK' and 'Hanjin' were chosen to compare whether each categorical sentiment is significantly different in pair-wise t-test. Since category 'Sadness' has the largest vocabularies, it is chosen to figure out whether the subgroups of the companies are significantly different in Duncan test. It is proved that five sentiment categories of Samsung and Hanjin and four sentiment categories of SK and Hanjin are different significantly. In category 'Sadness', it has been figured out that there were six subgroups that are significantly different. To test the effectiveness of the sentiment lexicon as time series comparison index, 'nut rage' incident of Hanjin is selected as an example case. Term frequency of sentiment words of the month when the incident happened and term frequency of the one month before the event are compared. Sentiment categories was redivided into positive/negative sentiment, and it is tried to figure out whether the event actually has some negative impact on public sentiment of the company. The difference in each category was visualized, moreover the variation of word list of sentiment 'Rage' was shown to be more concrete. As a result, there was huge before-and-after difference of sentiment that ordinary people feel to the company. Both hypotheses have turned out to be statistically significant, and therefore sentiment analysis in business area using multi-categorical sentiment lexicons has persuasive power. This research implies that categorical sentiment analysis can be used as an alternative method to supplement dimensional sentiment analysis when figuring out public sentiment in business environment.

• The Journal of Korean Physical Therapy
• /
• v.10 no.2
• /
• pp.13-32
• /
• 1998

A questionaire was conducted to obtain ran satisfactions in information of the 325 disabled persons among the total 9,314 handicapped people in Taejon area, and was surveyed during the period of June 1 to August 31, 1997. The results are as follows: 1. Among the studied disabled persons, $54.5\%$ of male, and $45.5\%$ of female. 2. Before disabled in occupation, $32.0\%$ of out of work group were high, $6.5\%$ of farm, student group were low. Before disabled in occupation by gender, male group is $29.9\%$ of out of work group were high, $0.6\%$ of housework group were low. female group is$34.5\%$ of out of work group were high, $4.7\%$ of student group were low(P<0.001). 3. After disabled in occupation, $75.1\%$ of out of work group wert high, $10.8\%$ of in working group were low. After disabled in occupation by gender, male group is $87.6\%$ of out of work group were high, $1.7\%$ of housework group were low. female group is $60.1\%$ of out of work group were hgh, $10.8\%$ of in working group were low(P<0.001). 4. Medical security status, $64.9\%$ of medical aid group wore high, $35.1\%$ of medical insurance group were low. Medical security status by gender, male group is $71.2\%$ of medical aid group were high, $28.8\%$ of medical insurance group were Iew. female group is $57.4\%$ of medical aid group wan high, $42.6\%$ of medical insurance were low(P<0.01). 5. Disabled record status, $68.6\%$ of record group were high, $31.4\%$ of non group were low. Disabled record status by gender, male group is $78.5\%$ of record group were high, $21.5\%$ of non record group were low. female group is $56.6\%$ of record group were high, $43.4%$ of non record group were low(P<0.001). 6. Disabled duration status, $42.2\%$ of loss than 9 year group were high, $10.2\%\;of\;20-29,\;30-39$ year group were low. Disabled duration status by gender,'male group is $44.6\%$ of less than 9 year group were high, $6.2\%$ of 20-29 year group wert low. female group is $39.2\%$ of less than 9 year were high, $39.2\%$ of 30-39 year group were low (P<0.05). 7. Cause of disabled status, $26.5\%$ of other group, $23.7\%$ of congenital group were high. $9.2\%$ of unknown group, $6.8\%$ of industry accident, $2.5\%$ of drug poisoning group were low. Cause of disabled status by gender, male group is $27.7\%$ of other group, $23.7\%$ of congenital group were high, $2.3\%$ drug poisoning group were low. female group is $25.0\%$ of other group, $20.9\%$ of congenital group were high, $2.5\%$ of drug poisoning group were low (P<0.001). 8. Disabled type status, $19.4\%$ of double disabled group were high, $2.2\%$ of muscle paralysis group were low. Disabled type status by gender, male group is $22.0\%$ of double disabled group were high, $2.3\%$ of muscle paralysis group were low. female group is $23.3\%$ of rheumatism group were high, $0.7\%$ of amputation group were low(P<0.001). 9. Smoking status, $73.2\%$ of non smoking group were high, $26.8\%$ of smoking group were low. Smoking status by gender, male group is $59.9\%$ of double non smoking group were high, $40.1\%$ of Smoking group were low, female group is $89.2\%$ of non smoking group were high, $10.8\%$ of smoking group were low(P<0.001). 10. Drinking status, $80.0\%$ of non drinking group were high, $20.0\%$ of drinking group were low. Drinking status by gender, male group is $72.3\%$ of non drinking group were high, $27.7\%$ of drinking group were low. female group is $89.2\%$ of non drinking group were high, $10.8\%$ of drinking group were low(P<0.001). 11. Stress level status, $52.9\%$ of high stress group were high, $1.8\%$ of very severe stress group were low. Stress level status by gender, male group is $50.8\%$ of high stress group were high, $2.3\%$ of very severe stress group were low. female group is $55.4\%$of high stress group were high, $1.4\%$ of very severe stress group were low. 12. Heed status, $28.0\%$ of economic support were high, $4.6\%$ of speech therapy, brace group were low. Need status by Sender, male group is $2i2\%$ of economic support group were high, $4.5\%$ of bracegroup were low. female group is$27.7\%$ of economic support group were high, $3.4\%$ of speech therapy group were low. 13. Care satisfaction comparision, 3.09, 0.55 point of IBR, 4.01, 0.45 point of CHR(P<0.001). 14. The variables which had positive correlation with IBR were gender(r=0.1406, P<0.01), age(r=0.1872, p<0.001), economic level(r=0.1246, P<0.05), disabled record(r=0.1137, P<0.05), education level(r=-0.1122. p<0.05). 15. The variables which had positive : correlation with CBR were gender(r=0.1613, P<0.01), age(r=0.2255, P<0.001). list of family(r=0.12i3, P<0.01), disabled record(r=0.1273, P<0.05). education level(r=-0.1294, P<0.01).

• Journal of Global Scholars of Marketing Science
• /
• v.17 no.2
• /
• pp.31-54
• /
• 2007

The exchange between buyers and sellers in the industrial market is changing from short-term to long-term relationships. Long-term relationships are governed mainly by formal contracts or informal agreements, but many scholars are now asserting that controlling relationship by using formal contracts under environmental dynamism is inappropriate. In this case, partners will depend on each other's flexibility or interdependence. The former, flexibility, provides a general frame of reference, order, and standards against which to guide and assess appropriate behavior in dynamic and ambiguous situations, thus motivating the value-oriented performance goals shared between partners. It is based on social sacrifices, which can potentially minimize any opportunistic behaviors. The later, interdependence, means that each firm possesses a high level of dependence in an dynamic channel relationship. When interdependence is high in magnitude and symmetric, each firm enjoys a high level of power and the bonds between the firms should be reasonably strong. Strong shared power is likely to promote commitment because of the common interests, attention, and support found in such channel relationships. This study deals with environmental dynamism in high-tech industry. Firms in the high-tech industry regard it as a key success factor to successfully cope with environmental changes. However, due to the lack of studies dealing with environmental dynamism and supply chain commitment in the high-tech industry, it is very difficult to find effective strategies to cope with them. This paper presents the results of an empirical study on the relationship between environmental dynamism and supply chain commitment in the high-tech industry. We examined the effects of consumer, competitor, and technological dynamism on supply chain commitment. Additionally, we examined the moderating effects of flexibility and dependence of supply chains. This study was confined to the type of high-tech industry which has the characteristics of rapid technology change and short product lifecycle. Flexibility among the firms of this industry, having the characteristic of hard and fast growth, is more important here than among any other industry. Thus, a variety of environmental dynamism can affect a supply chain relationship. The industries targeted industries were electronic parts, metal product, computer, electric machine, automobile, and medical precision manufacturing industries. Data was collected as follows. During the survey, the researchers managed to obtain the list of parts suppliers of 2 companies, N and L, with an international competitiveness in the mobile phone manufacturing industry; and of the suppliers in a business relationship with S company, a semiconductor manufacturing company. They were asked to respond to the survey via telephone and e-mail. During the two month period of February-April 2006, we were able to collect data from 44 companies. The respondents were restricted to direct dealing authorities and subcontractor company (the supplier) staff with at least three months of dealing experience with a manufacture (an industrial material buyer). The measurement validation procedures included scale reliability; discriminant and convergent validity were used to validate measures. Also, the reliability measurements traditionally employed, such as the Cronbach's alpha, were used. All the reliabilities were greater than.70. A series of exploratory factor analyses was conducted. We conducted confirmatory factor analyses to assess the validity of our measurements. A series of chi-square difference tests were conducted so that the discriminant validity could be ensured. For each pair, we estimated two models-an unconstrained model and a constrained model-and compared the two model fits. All these tests supported discriminant validity. Also, all items loaded significantly on their respective constructs, providing support for convergent validity. We then examined composite reliability and average variance extracted (AVE). The composite reliability of each construct was greater than.70. The AVE of each construct was greater than.50. According to the multiple regression analysis, customer dynamism had a negative effect and competitor dynamism had a positive effect on a supplier's commitment. In addition, flexibility and dependence had significant moderating effects on customer and competitor dynamism. On the other hand, all hypotheses about technological dynamism had no significant effects on commitment. In other words, technological dynamism had no direct effect on supplier's commitment and was not moderated by the flexibility and dependence of the supply chain. This study makes its contribution in the point of view that this is a rare study on environmental dynamism and supply chain commitment in the field of high-tech industry. Especially, this study verified the effects of three sectors of environmental dynamism on supplier's commitment. Also, it empirically tested how the effects were moderated by flexibility and dependence. The results showed that flexibility and interdependence had a role to strengthen supplier's commitment under environmental dynamism in high-tech industry. Thus relationship managers in high-tech industry should make supply chain relationship flexible and interdependent. The limitations of the study are as follows; First, about the research setting, the study was conducted with high-tech industry, in which the direction of the change in the power balance of supply chain dyads is usually determined by manufacturers. So we have a difficulty with generalization. We need to control the power structure between partners in a future study. Secondly, about flexibility, we treated it throughout the paper as positive, but it can also be negative, i.e. violating an agreement or moving, but in the wrong direction, etc. Therefore we need to investigate the multi-dimensionality of flexibility in future research.

• Korean Journal of Environment and Ecology
• /
• v.28 no.1
• /
• pp.80-89
• /
• 2014

This study of the school's outdoor space for relaxing and activity of the two most numerous students, high heat and low heat with a green space, playground targets of thermal comfort indicators UTCI, PMV, WBGT using the thermal comfort students feeling compare the analyzed. The destination of this study, school facilities of Nam-gu, Namdong- gu, Incheon were studied and the investigation period was conducted from July to August. List of measurement, in the case of thermal comfort indicators, UTCI, PMV, WBGT was measured in the case of green, ratio of green coverage and GVZ was measured. GVZ analysis were as follows: A school ($4.71m^3/m^2$) B school ($3.34m^3/m^2$) C school ($0.38m^3/m^2$). Comparative analysis of the results of thermal comfort indicators by schools, UTCI was Green space $26.15{\sim}31.38^{\circ}C$ and playground $40.66{\sim}42.94^{\circ}C$, PMV values were 1.76 to 2.66 as a green space. WBGT was Green space $26.15{\sim}31.38^{\circ}C$, playground $31.67{\sim}34.53^{\circ}C$. Comparative analysis of the results of thermal comfort indicators UTCI, PMV, WBGT all A school, B school, C school, on the green space was comfortable levels more than playground. The results of the school type thermal comfort and green correlation analysis of thermal comfort UTCI, PMV, WBGT all solar radiation, globe temperature, and a positive correlation shown solar radiation, globe temperature is not comfortable, the higher was considered. UTCI, PMV, WBGT of thermal comfort indicator all ratio of green coverage, GVZ and negative correlation appears ratio of green coverage, GVZ was increased due to the lowering of the value of thermal comfort indicators was considered to be comfortable.

• Survey Research
• /
• v.13 no.1
• /
• pp.135-158
• /
• 2012

Korean telephone surveys have been based on landline telephone directory or RDD(Random Digit Dialing) method. These days, however, there has been an increase of the households with no landline, or households with the line but not willing to register in the directory. Moreover, it is hard to contact young people or office workers who are usually staying out of home in the daytime. Due to these issues above, the predictability of election polls gets weaker. Especially, low accessibility to those who stay out of home when the poll's done, results in predictions with positive inclination toward conservatism. A solution to resolve this problem is to contact respondents by using both mobile and landline phones-via landline phone to those who are at home and via mobile phone to those who are out of home in the daytime(Mixed Mode Survey, hereafter MMS). To conduct MMS, 1) we need to obtain the sampling frames for the landline and mobile surveys, and 2) we need to decide the proportion of sample size of both. In this paper, we propose a heuristic method for conducting MMS. The method uses RDD for the landline phone survey, and the access panel list for the mobile phone survey. The proportion of sample sizes between landline and mobile phones are determined based on the 'Lifestyle and Time Use Study' conducted by Statistics Korea. As a case study, 4 election polls were conducted in the periods of the special election for the mayor of Seoul on Oct 26th, 2011. From the initial 3 polls, reactions and responses regarding the issues raised during the survey period were appropriately covered, and the final poll showed a very close prediction to the real election result.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.65 no.4
• /
• pp.485-495
• /
• 2020

Melon (Cucumis melo L.), one of the most important fruit crop species, is cultivated worldwide. In this study, a total of 206 melon accessions conserved at the National Agrobiodiversity Center (NAC) in RDA were characterized for nine morphological characteristics according to the NAC descriptor list. In addition, to confirm the genetic composition of each melon accession, genetic profiling was performed using 20 SSR markers. Among the 206 melon accessions, 159 (77.2%) were collected from Asia. The color of fruit flesh and skin were mostly 'white' (56.0%) and 'green' (49%), respectively. Days to female flowering (FD) and maturity (MD) of the accessions ranged from 58 to 72 and 17 to 63, respectively. The fruit length and width of the accessions ranged from 6.0 to 29.3 and 3.6 to 17.2 cm, respectively. The sugar content (SU) ranged from 2.5% to 13.2% with an average of 7.0%. In correlation analysis, SU showed positive and negative correlations with MD and FD, respectively. The accessions were classified into four clusters by cluster analysis. From the results of genetic profiling using 20 SSR markers, three accessions (K189118, K100486, and K190292) were expected to be inbred lines among 206 melon accessions. These results could expand the knowledge of the melon germplasm, providing valuable material for the development of new melon varieties to suit consumer tastes.