• 제목/요약/키워드: Positioning Map

검색결과 339건 처리시간 0.023초

Traffic Flow Sensing Using Wireless Signals

  • Duan, Xuting;Jiang, Hang;Tian, Daxin;Zhou, Jianshan;Zhou, Gang;E, Wenjuan;Sun, Yafu;Xia, Shudong
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제15권10호
    • /
    • pp.3858-3874
    • /
    • 2021
  • As an essential part of the urban transportation system, precise perception of the traffic flow parameters at the traffic signal intersection ensures traffic safety and fully improves the intersection's capacity. Traditional detection methods of road traffic flow parameter can be divided into the micro and the macro. The microscopic detection methods include geomagnetic induction coil technology, aerial detection technology based on the unmanned aerial vehicles (UAV) and camera video detection technology based on the fixed scene. The macroscopic detection methods include floating car data analysis technology. All the above methods have their advantages and disadvantages. Recently, indoor location methods based on wireless signals have attracted wide attention due to their applicability and low cost. This paper extends the wireless signal indoor location method to the outdoor intersection scene for traffic flow parameter estimation. In this paper, the detection scene is constructed at the intersection based on the received signal strength indication (RSSI) ranging technology extracted from the wireless signal. We extracted the RSSI data from the wireless signals sent to the road side unit (RSU) by the vehicle nodes, calibrated the RSSI ranging model, and finally obtained the traffic flow parameters of the intersection entrance road. We measured the average speed of traffic flow through multiple simulation experiments, the trajectory of traffic flow, and the spatiotemporal map at a single intersection inlet. Finally, we obtained the queue length of the inlet lane at the intersection. The simulation results of the experiment show that the RSSI ranging positioning method based on wireless signals can accurately estimate the traffic flow parameters at the intersection, which also provides a foundation for accurately estimating the traffic flow state in the future era of the Internet of Vehicles.

포인트 클라우드를 이용한 IndoorGML 데이터의 자동적 구축 (Automated Construction of IndoorGML Data Using Point Cloud)

  • 김성환;이기준
    • 한국측량학회지
    • /
    • 제38권6호
    • /
    • pp.611-622
    • /
    • 2020
  • 실내공간에 대한 측위 기술과 함께 LiDAR (Light Detection And Ranging)나 카메라와 같이 공간을 측정 장비가 발달하면서 실내공간에 대한 분석과 탐색, 가상현실이나 증강현실을 통한 시각화 서비스에 대한 수요가 증가하고 있다. 이를 위해서는 실제 세계로부터 측정된 데이터를 이용하여 3차원 객체로 모델링하는 작업이 필요하다. 또한 이렇게 구조화된 데이터의 가용성과 상호운용성을 높이기 위하여 표준화된 규격으로 저장하는 것도 매우 중요하다. 본 논문에서는 LiDAR 장비를 통해 획득한 포인트 클라우드 데이터를 이용하여 실내공간을 표현하기 위한 국제표준인 IndoorGML 데이터를 자동적으로 구축하는 방법을 제안하고자 한다. IndoorGML 데이터를 구성하는 과정에서 고려해야 할 점들을 살펴본 후, 자유공간추출과 연결성 검출 과정으로 이루어진 데이터 구축 과정을 통하여 실제로 IndoorGML 데이터를 구축한다. 실험을 통하여 제안 기법이 입력 포인트 클라우드로부터 3차원 데이터 모델을 효과적으로 재구성할 수 있음을 검증한다.

항만내 차량 위치인식 및 영상 확인 시스템 구현 (Implementation of Vehicle Location Identification and Image Verification System in Port)

  • 이기욱
    • 한국컴퓨터정보학회논문지
    • /
    • 제14권12호
    • /
    • pp.201-208
    • /
    • 2009
  • 최근의 항만은 유비쿼터스 환경 구축에 따른 일반적인 항만 관리에 있어 U-Port 서비스를 도입하여 컨테이너 위치 추적 시스템, 항만 터미널 관리 시스템, 선진정보교환시스템 등을 구현하고 있다. 특히, 화물 차량과 컨테이너의 위치 추적 서비스는 실시간으로 화물차량과 컨테이너의 위치와 상태 정보를 제공하여 효율적인 차량 운행 관리와 문제 발생시 즉각적인 대처가 가능하게 한다. 하지만 대규모 항만 내에서 화물 차량의 무질서한 운행이나 주 정차, 도난 파손 사고 출입 관제 등의 문제를 효율적으로 관리하기에는 미흡하다. 본 논문에서는 항만 내에서의 이러한 문제점을 해결하기 위하여 자동 게이트 통관 시점부터 항만 내에 화물 차량이 체재하는 동안 차량 또는 출입자의 위치를 전자 지도상에 표시하고, 확인이 필요하거나 사고 발생 지역을 원격에서 영상으로 확인할 수 있는 항만내 차량 또는 출입자의 위치 인식 및 고해상도 영상 압축, AVE/H.264 저장 및 영상 전송을 통한 영상 확인 시스템을 구현하였다.

고해상도 위성영상으로부터 건물 정위 레이어 자동추출 (Automated Extraction of Orthorectified Building Layer from High-Resolution Satellite Images)

  • 김승희;김태정
    • 대한원격탐사학회지
    • /
    • 제39권3호
    • /
    • pp.339-353
    • /
    • 2023
  • 고해상도 위성영상의 제공이 증가함에 따라 위성영상의 위치정확도 향상이 요구되고 있다. 이를 위해 기복변위를 제거하고 인공지물의 정위가 수립된 정사영상 생성의 중요성이 높아지고 있다. 본 논문에서는 기존에 구축된 건물 높이 데이터베이스를 이용하여 원본 위성영상에서의 건물 옥상면과 건물포함영역을 자동으로 추출하였다. 이후 추출된 건물 옥상면을 정위치 편집하여 건물 정위 레이어(layer)를 생성하였다. 추출된 건물포함영역을 이용하여 위성영상에서 건물영역을 공백 처리하여 비건물 정위 레이어를 생성하였다. 이후, 실감정사 건물레이어와 실감정사 비건물레이어를 중첩하여 최종 정사영상을 제작하였다. 본 연구에서 제안한 방법은 KOMPSAT-3 및 KOMPSAT-3A 위성영상을 이용해 실험하였으며, 실험 결과를 수치지형도와 중첩하여 검증을 수행하였다. 실험결과 건물 정위 레이어는 0.4 m의 위치 오차를 가지는 것으로 나타났다. 제안 방법을 통해 도심지역에 대한 자동 실감정사영상 생성의 가능성을 확인하였다.

The branching patterns and termination points of the facial artery: a cadaveric anatomical study

  • Vu Hoang Nguyen;Lin Cheng-Kuan;Tuan Anh Nguyen;Trang Huu Ngoc Thao Cai
    • 대한두개안면성형외과학회지
    • /
    • 제25권2호
    • /
    • pp.77-84
    • /
    • 2024
  • Background: The facial artery is an important blood vessel responsible for supplying the anterior face. Understanding the branching patterns of the facial artery plays a crucial role in various medical specialties such as plastic surgery, dermatology, and oncology. This knowledge contributes to improving the success rate of facial reconstruction and aesthetic procedures. However, debate continues regarding the classification of facial artery branching patterns in the existing literature. Methods: We conducted a comprehensive anatomical study, in which we dissected 102 facial arteries from 52 embalmed and formaldehyde-fixed Vietnamese cadavers at the Anatomy Department, University of Medicine and Pharmacy, Ho Chi Minh City, Vietnam. Results: Our investigation revealed eight distinct termination points and identified 35 combinations of branching patterns, including seven arterial branching patterns. These termination points included the inferior labial artery, superior labial artery, inferior alar artery, lateral nasal artery, angular artery typical, angular artery running along the lower border of the orbicularis oculi muscle, forehead branch, duplex, and short course (hypoplastic). Notably, the branching patterns of the facial artery displayed marked asymmetry between the left and right sides within the same cadaver. Conclusion: The considerable variation observed in the branching pattern and termination points of the facial artery makes it challenging to establish a definitive classification system for this vessel. Therefore, it is imperative to develop an anatomical map summarizing the major measurements and geometric features of the facial artery. Surgeons and medical professionals involved in facial surgery and procedures must consider the detailed anatomy and relative positioning of the facial artery to minimize the risk of unexpected complications.

Perceptional Change of a New Product, DMB Phone

  • Kim, Ju-Young;Ko, Deok-Im
    • 마케팅과학연구
    • /
    • 제18권3호
    • /
    • pp.59-88
    • /
    • 2008
  • Digital Convergence means integration between industry, technology, and contents, and in marketing, it usually comes with creation of new types of product and service under the base of digital technology as digitalization progress in electro-communication industries including telecommunication, home appliance, and computer industries. One can see digital convergence not only in instruments such as PC, AV appliances, cellular phone, but also in contents, network, service that are required in production, modification, distribution, re-production of information. Convergence in contents started around 1990. Convergence in network and service begins as broadcasting and telecommunication integrates and DMB(digital multimedia broadcasting), born in May, 2005 is the symbolic icon in this trend. There are some positive and negative expectations about DMB. The reason why two opposite expectations exist is that DMB does not come out from customer's need but from technology development. Therefore, customers might have hard time to interpret the real meaning of DMB. Time is quite critical to a high tech product, like DMB because another product with same function from different technology can replace the existing product within short period of time. If DMB does not positioning well to customer's mind quickly, another products like Wibro, IPTV, or HSPDA could replace it before it even spreads out. Therefore, positioning strategy is critical for success of DMB product. To make correct positioning strategy, one needs to understand how consumer interprets DMB and how consumer's interpretation can be changed via communication strategy. In this study, we try to investigate how consumer perceives a new product, like DMB and how AD strategy change consumer's perception. More specifically, the paper segment consumers into sub-groups based on their DMB perceptions and compare their characteristics in order to understand how they perceive DMB. And, expose them different printed ADs that have messages guiding consumer think DMB in specific ways, either cellular phone or personal TV. Research Question 1: Segment consumers according to perceptions about DMB and compare characteristics of segmentations. Research Question 2: Compare perceptions about DMB after AD that induces categorization of DMB in direction for each segment. If one understand and predict a direction in which consumer perceive a new product, firm can select target customers easily. We segment consumers according to their perception and analyze characteristics in order to find some variables that can influence perceptions, like prior experience, usage, or habit. And then, marketing people can use this variables to identify target customers and predict their perceptions. If one knows how customer's perception is changed via AD message, communication strategy could be constructed properly. Specially, information from segmented customers helps to develop efficient AD strategy for segment who has prior perception. Research framework consists of two measurements and one treatment, O1 X O2. First observation is for collecting information about consumer's perception and their characteristics. Based on first observation, the paper segment consumers into two groups, one group perceives DMB similar to Cellular phone and the other group perceives DMB similar to TV. And compare characteristics of two segments in order to find reason why they perceive DMB differently. Next, we expose two kinds of AD to subjects. One AD describes DMB as Cellular phone and the other Ad describes DMB as personal TV. When two ADs are exposed to subjects, consumers don't know their prior perception of DMB, in other words, which subject belongs 'similar-to-Cellular phone' segment or 'similar-to-TV' segment? However, we analyze the AD's effect differently for each segment. In research design, final observation is for investigating AD effect. Perception before AD is compared with perception after AD. Comparisons are made for each segment and for each AD. For the segment who perceives DMB similar to TV, AD that describes DMB as cellular phone could change the prior perception. And AD that describes DMB as personal TV, could enforce the prior perception. For data collection, subjects are selected from undergraduate students because they have basic knowledge about most digital equipments and have open attitude about a new product and media. Total number of subjects is 240. In order to measure perception about DMB, we use indirect measurement, comparison with other similar digital products. To select similar digital products, we pre-survey students and then finally select PDA, Car-TV, Cellular Phone, MP3 player, TV, and PSP. Quasi experiment is done at several classes under instructor's allowance. After brief introduction, prior knowledge, awareness, and usage about DMB as well as other digital instruments is asked and their similarities and perceived characteristics are measured. And then, two kinds of manipulated color-printed AD are distributed and similarities and perceived characteristics for DMB are re-measured. Finally purchase intension, AD attitude, manipulation check, and demographic variables are asked. Subjects are given small gift for participation. Stimuli are color-printed advertising. Their actual size is A4 and made after several pre-test from AD professionals and students. As results, consumers are segmented into two subgroups based on their perceptions of DMB. Similarity measure between DMB and cellular phone and similarity measure between DMB and TV are used to classify consumers. If subject whose first measure is less than the second measure, she is classified into segment A and segment A is characterized as they perceive DMB like TV. Otherwise, they are classified as segment B, who perceives DMB like cellular phone. Discriminant analysis on these groups with their characteristics of usage and attitude shows that Segment A knows much about DMB and uses a lot of digital instrument. Segment B, who thinks DMB as cellular phone doesn't know well about DMB and not familiar with other digital instruments. So, consumers with higher knowledge perceive DMB similar to TV because launching DMB advertising lead consumer think DMB as TV. Consumers with less interest on digital products don't know well about DMB AD and then think DMB as cellular phone. In order to investigate perceptions of DMB as well as other digital instruments, we apply Proxscal analysis, Multidimensional Scaling technique at SPSS statistical package. At first step, subjects are presented 21 pairs of 7 digital instruments and evaluate similarity judgments on 7 point scale. And for each segment, their similarity judgments are averaged and similarity matrix is made. Secondly, Proxscal analysis of segment A and B are done. At third stage, get similarity judgment between DMB and other digital instruments after AD exposure. Lastly, similarity judgments of group A-1, A-2, B-1, and B-2 are named as 'after DMB' and put them into matrix made at the first stage. Then apply Proxscal analysis on these matrixes and check the positional difference of DMB and after DMB. The results show that map of segment A, who perceives DMB similar as TV, shows that DMB position closer to TV than to Cellular phone as expected. Map of segment B, who perceive DMB similar as cellular phone shows that DMB position closer to Cellular phone than to TV as expected. Stress value and R-square is acceptable. And, change results after stimuli, manipulated Advertising show that AD makes DMB perception bent toward Cellular phone when Cellular phone-like AD is exposed, and that DMB positioning move towards Car-TV which is more personalized one when TV-like AD is exposed. It is true for both segment, A and B, consistently. Furthermore, the paper apply correspondence analysis to the same data and find almost the same results. The paper answers two main research questions. The first one is that perception about a new product is made mainly from prior experience. And the second one is that AD is effective in changing and enforcing perception. In addition to above, we extend perception change to purchase intention. Purchase intention is high when AD enforces original perception. AD that shows DMB like TV makes worst intention. This paper has limitations and issues to be pursed in near future. Methodologically, current methodology can't provide statistical test on the perceptual change, since classical MDS models, like Proxscal and correspondence analysis are not probability models. So, a new probability MDS model for testing hypothesis about configuration needs to be developed. Next, advertising message needs to be developed more rigorously from theoretical and managerial perspective. Also experimental procedure could be improved for more realistic data collection. For example, web-based experiment and real product stimuli and multimedia presentation could be employed. Or, one can display products together in simulated shop. In addition, demand and social desirability threats of internal validity could influence on the results. In order to handle the threats, results of the model-intended advertising and other "pseudo" advertising could be compared. Furthermore, one can try various level of innovativeness in order to check whether it make any different results (cf. Moon 2006). In addition, if one can create hypothetical product that is really innovative and new for research, it helps to make a vacant impression status and then to study how to form impression in more rigorous way.

  • PDF

한반도 일원의 중력측정 및 보정의 정밀화와 고밀도 부우게이상 (On the Improvement of Precision in Gravity Surveying and Correction, and a Dense Bouguer Anomaly in and Around the Korean Peninsula)

  • 신영홍;양철수;옥수석;최광선
    • 한국지구과학회지
    • /
    • 제24권3호
    • /
    • pp.205-215
    • /
    • 2003
  • 정밀하고 밀도 높은 부우게이상자료는 지구물리학과 물리측지학적인 측면에서 중요한 기초자료가 된다. 이를 위해서 정밀한 절대중력기준점망의 설치외에도 두 가지 측면을 고려해야 하는데, 하나는 중력측정과 보정의 정밀도를 향상시키는 것이며, 다른 하나는 측점의 밀도를 높이는 일이다. 중력측정에서 GPS를 어떻게 적절히 이용할 것인가에 대해서 알아보았는데, 40km이내의 기선거리에서 두 대의 측지용 GPS수신기를 이용하면, 5분간의 GPS측정으로도 충분하다고 여겨진다. 이 경우 PNU95 지오이드모델과 같은 정밀한 지오이드모델을 사용하여야 한다, 이 방법을 적용함으로써, 비용 및 시간과 인력을 줄일 수 있을 뿐만 아니라 질적인 측면에서도 향상을 가져온다. 또 교점오차를 보정하고 지형효과를 정밀하게 계산하기 위해 컴퓨터 프로그램을 개발했다. 중력탐사에서 같은 지점에서 중복 측정하는 것은 스프링의 변이를 보정하는 것뿐만 아니라 망조정을 적용함으로써 결과들에 대해 통계적으로 접근하는 것을 가능하게 한다. 그럼으로써 다양한 원인에 기인한 큰 오차를 쉽게 찾아내고 보정하여 자료의 질을 향상시킬 수 있으며, 또한 측정의 질을 평가할 수 있다. 최근의 컴퓨터 기술과 디지털 고도자료의 발달도 좀더 정밀한 지형보정을 사용하여 부우게이상의 질을 향상하도록 우리를 고무하고 있다. 본 연구에서는 육상중력, 선상중력, 북한의 부우게이상도, 일본의 중력자료, 고도위성자료, EGM96 지오포텐셜 자료 등, 다양한 중력자료를 입수하였다. 따라서, 이들 자료를 계산하고 편집하여 한반도 일원의 정밀 부우게이상도를 작성할 수 있었는데, 이것은 지구물리학과 물리측지학의 응용에 유용한 자료가 될 것이다.

마이크로 셀룰라 Wide-band CDMA 환경에서의 위치 추정 알고리즘 (Radio location algorithm in microcellular wide-band CDMA environment)

  • 장진원;한일;성단근;신병철;홍인기
    • 한국통신학회논문지
    • /
    • 제23권8호
    • /
    • pp.2052-2063
    • /
    • 1998
  • 본격척인 위치추적 시스템은 2차 세계대전 중에 등장한 전파항법 장치 (ground-based radio navigation system)에서부터 시작하여 꾸준히 연구되어 왔으며 현재 대표적인 위치추적 시스템으로는 GPS (global positioning system)을 들 수 있다. 최근에는 셀룰라 서비스의 보편화에 따라 기지국을 이용하여 위치추적 서비스를 제공하는 연구가 진행되고 있으나 지금까지는 주로 기지국간 동기 시스템인 매크로 셀룰라에 집중되어 왔다. 하지만, 기지국에서 정확한 시간을 이용할 수 없는 wide-band CDMA 시스템의 기지국간 비동기 상황에 대한 연구는 전무하다. 본 논문에서는 기지국간 비동기인 마이크로 셀룰라 wide-band CDMA 시스템 상황에서 두 가지 위치추정 알고리즘을 제안한다. 첫째는 공통영역을 통한 위치추정 방법으로 의사거리에 의해 구성되는 원 사이의 겹치는 공통영역을 사각형으로 근사하여 그 중심을 개인국의 위치로 추정하는 방법이고 둘째는 도로정보를 이용하는 방법으로서 의사거리 하나만을 이용하여 기지국에서 그 의사거리에 해당되는 도로 지점을 확인하고 주변 파일럿 세기를 확인하여 그 지점 중에서 선택하는 방식이다. 이 두 방식은 시뮬레이션을 이용하여 기존의 대표적인 방식들 (Taylor series를 이용한 방식. conjugate gradient 방식 및 공통현 방식)과 비교되며 또한 기지국과 개인국간의 파일럿 채널 송수신의 간섭으로 인한 영향을 조사한다. 기존의 위치추정 알고리즘이 반복 연산을 수행하는 데 비히여 제안 알고리즘은 반복 연산을 하지 않으며 마이크로 셀 환경에서 간접파의 영향을 적게 받기 때문에 보다 적은 위치 에러를 나타낸다., 초과확률 등을 이용한 분석을 실시하였다. 분석 결과 Warm ENSO episode의 경우 강수량 증가와 유의한 상관관계를 나타냈으며, Cold ENSO episode의 경우 강수량 감소와 유의한 상관관계를 나타내었다. 이러한 분석 결과는 최근 들어 우리나라에 발생하고 있는 이상기후발생과 관련된 연구에 유용한 정보를 제공해 줄 수 있을 것으로 판단된다.EX>$\times$2등 LEED패턴을 관찰할 수 있었다.유(思惟)로서 관찰추리(觀察推理)되였기 때문에 현대의학(現代醫學)과의 비교설명(比較說明)이 거의 불가능(不可能)하며 또한 한의학이론(韓醫學理論)의 과학적근거제시(科學的根據提示)도 현재(現在)로서는 어려운 형편(形便)이다. 그러나 이 의학(醫學)은 이미 2,000여년간(餘年間) 동양(東洋)에서 전래(傳來)한 경험의학(經驗醫學)으로서 동양인(東洋人)들은 이 의학(醫學)으로 소화계질환(消化系疾患)을 포함(包含)한 여러 가지 인간(人間)의 질병(疾病)을 치료(治療)해 왔고 현재(現在)도 이 의학(醫學)으로 치료(治療)를 하고 있고 실제적(實際的)으로 많은 치효(治效)를 보고 있는 것이다. 그러므로 이 의학(醫學)속에는 아직도 현대과학(現代科學)으로서 해명(解明)되지 못하는 어떤 요소(要素)들이 깃들여 있는 것이 확실(確實)하며 이것을 밝혀내기 위해서 우리 의학자(醫學者)들은 이 의학(醫學)에 관(關)한 모든 것을 연구(硏究)해 보아야 한다. 이런 뜻에서 본고찰(本考察)은 한방(漢方)의 역대제문헌(歷代諸文獻)을 섭렵(涉獵)하여 소화계질환(消化系疾患)에 관(關)한 제이론(諸理論)들을 발췌(拔萃), 한방(漢方)에서 보는 (1) 소화기관(消化器官)의 생리(生理) (2) 병리(病理), 증후(證候)

  • PDF

GPS 취약 환경에서 전술급 무인항공기의 주/야간 영상정보를 기반으로 한 실시간 비행체 위치 보정 시스템 개발 (Development of Real-Time Vision Aided Navigation Using EO/IR Image Information of Tactical Unmanned Aerial System in GPS Denied Environment)

  • 최승기;조신제;강승모;이길태;이원근;정길순
    • 한국항공우주학회지
    • /
    • 제48권6호
    • /
    • pp.401-410
    • /
    • 2020
  • 본 연구에서는 전술급 무인항공기의 GPS 신호간섭 및 재밍(Jamming)/기만(Spoofing) 공격 시 위치항법 정보의 취약성을 보완하기 위해 개발한 영상정보 기반 실시간 비행체 위치보정 시스템을 기술하고자 한다. 전술급 무인항공기는 GPS 두절 시 항법장비가 GPS/INS 통합항법에서 DR/AHRS 모드로 전환하여 자동비행이 가능하나, 위치 항법의 경우 대기속도 및 방위각을 활용한 추측항법(DR, Dead Reckoning)으로 인해 시간이 지나면 오차가 누적되어 비행체 위치 파악 및 데이터링크 안테나 자동추적이 제한되는 등의 문제점을 갖고 있다. 이러한 위치 오차의 누적을 최소화하기 위해 영상감지기를 이용한 특정지역 위치보정점을 바탕으로 비행체 자세, 영상감지기 방위각/고각 및 수치지도 데이터(DTED)를 활용하여 비행체 위치를 계산하고 이를 실시간으로 항법장비에 보정하는 시스템을 개발하였다. 또한 GPS 시뮬레이터를 이용한 지상시험과 추측항법 모드의 비행시험으로 영상정보 기반 실시간 비행체 위치보정 시스템의 기능 및 성능을 검증하였다.

Fuzzy-AHP를 활용한 미래유망 의료기기 우선순위 도출 (A Study on the Prioritization of Medical Device using Fuzzy-AHP)

  • 이창섭;윤재웅;전재헌;이석준
    • 경영과정보연구
    • /
    • 제36권1호
    • /
    • pp.181-213
    • /
    • 2017
  • 전 세계적으로 고령화 문제가 대두됨에 따라 최근 의료기기 산업이 미래 유망 산업으로 주목받고 있다. 하지만 의료기기 산업의 높은 성장이 예견됨에도 불구하고 국내외 협소한 내수시장과 영세한 기업구조로 인해 국내 기업들의 자체적인 노력만으로는 성장에 한계가 있다. 따라서 본 연구에서는 국내 의료기기 산업의 효과적인 육성을 위해 다음과 같은 연구를 수행하였다. 첫째, 한국보건산업진흥원의 의료기기 분류체계를 참고하여 의료기기를 중분류, 세분류, 세세분류로 구분했으며, 의료기기 관련 전문가 30명을 대상으로 설문조사를 실시하였다. 둘째, 설문조사 결과를 토대로 AHP 분석과 이를 보완한 Fuzzy-AHP 분석을 수행하였으며, AHP와 Fuzzy-AHP의 분석결과 도출된 Global 가중치를 X축과 Y축으로 하는 포지셔닝 맵을 활용하여 분류별 미래 유망 의료기기 우선순위를 도출하였다. 셋째, 보건산업 통계의 의료기기 생산액과 우선순위를 비교분석하여 핵심 미래 유망 의료기기를 선별하였다. 연구 결과 '치과 재료'의 세분류인 '치과용 임플란트'가 핵심 미래 유망 의료기기로 선정되었으며, 해당 의료기기의 지원 전략을 제시하였다. 의료기기 산업이 미래 유망 산업으로 주목받고 있는 현 시점에서 본 연구를 통해 도출된 핵심 미래 유망 의료기기 및 전략 도출 방법이 국내 의료기기 R&D 개발 및 지원 정책에 활용될 것으로 기대된다.

  • PDF