• Current Optics and Photonics
• /
• v.7 no.4
• /
• pp.337-344
• /
• 2023

Three-point bending is the main method for measuring the elastic modulus of a thin plate. Although various displacement transducers may be used to measure the bending, these are single-point measurements, and it is difficult to eliminate the error caused by eccentric load and shear force. Error-correction models for the elastic modulus of quartz glass using digital speckle interferometry are proposed for eccentric load and shear force. First, the positional misalignment between maximum deflection and load is analyzed, and the error caused by eccentric load is corrected. Then, the additional displacement caused by shear force at different positions of the quartz glass plate is explored. The effect of shear deformation is also corrected, by measuring two points. Since digital speckle interferometry has the advantage of full-field measurement, it can simultaneously obtain deflection data for multiple points to realize error correction. Experimental results are presented to demonstrate that the proposed model can effectively correct the measurement error of the elastic modulus.

• Journal of Ocean Engineering and Technology
• /
• v.38 no.1
• /
• pp.1-9
• /
• 2024

The vertical center of gravity (VCG) has a significant impact on the roll motion response of a surface ship, particularly oil tankers based on the oil level in the tanker after discharging oil at several stations or positional changes, such as changes in the superstructure and deck structure. This study examined the motion response of the Korea very large crude carrier 2 (KVLCC2) at various VCGs, especially roll motion when the VCG changed. The potential theory in the Ansys AQWA program was used as a numerical simulation method to calculate the motion response. On the other hand, the calculations obtained through potential theory overestimated the roll amplitudes during resonance and lacked precision. Therefore, roll damping is a necessary parameter that accounts for the viscosity effect by performing an experimental roll decay. The roll decay test estimated the roll damping coefficients for various VCGs using Froude's method. The motion response of the ship in regular waves was evaluated for various VCGs using the estimated roll-damping coefficients. In addition, the reliability of the numerical simulation in motion response was verified with those of the experiment method reported elsewhere. The simulation results showed that the responses of the surge, sway, heave, pitch, and yaw motion were not affected by changing the VCG, but the natural frequency and magnitude of the peak value of the roll motion response varied with the VCG.

• Korean Journal of Cognitive Science
• /
• v.33 no.1
• /
• pp.1-22
• /
• 2022

Lavie's perceptual load theory (Lavie, 1995) proposes that the influence of distractors would be blocked as the load gets higher. Studies of perceptual load have usually adopted the flanker task, developed by Eriksen and Eriksen (1974), which measures reaction time on the target flanked by distractors. In the post-cueing forced task, participants should report the identity of the target cued later, and negative repetition effect (NRE) has often been observed. NRE means the effect that the accuracy of identification is worse when the target is flanked by the same nontargets than when flanked by different nontargets. This study has tried to check whether perceptual load has an effect on identification rate and NRE. Experiment 1 manipulated the similarity between targets and a distractor, and observed a tendency of NRE, but not the effect of perceptual load. Experiment 2 used 4, 2 (in two kinds of diagonal arrangement), or none distractors of the same identity to burden more perceptual load. NRE was significant and perceptual load showed significance but not a linear trend. Experiment 3 checked again whether NRE would be varied according to two levels of perceptual load strengthened by positional variability of load stimuli, but did not find the effect of perceptual load. It is concluded that perceptual load might have a limited effect on the early stage of perceptual processing due to divided attentional processing of the targets briefly exposed. Implications of this study were discussed.

• Journal of Nutrition and Health
• /
• v.34 no.8
• /
• pp.896-904
• /
• 2001

Conjugated linoleic acid(CLA) is a group of positional and geometric isomers of linoleic acid(LA) and exhibits anticarcinogenic activity in multiple experimental animal models. Cis-9,trns-11(c9t11) and trans-10,cis-12(t10c12) CLA are the principal isomers found in foods. The present study was performed to determine whether CLA and the two isomers inhibits HT-29 cell proliferation and to assess whether such an effect was related to changes in secretion of eicosanoids. Cells were incubated in serum-free medium with various concentrations(0 to 20$\mu$M) of CLA or LA. CLA inhibited cell proliferation in a dose-dependent manner, with maximal inhibition(70 $\pm$ 1%) observed at 20$\mu$M concentration after 96 hours. However, LA had no effect at the same concentration range. To compare the ability of c9f11 and t10c12 to inhibit cell proliferation, cells were incubated with increasing concentrations(0 to 4$\mu$M) of these isomers. T10c12 inhibited cell proliferation in a dose-dependent manner. A 66 $\pm$ 2% decrease in cell number was observed within 96 hours after addition of 4$\mu$M t10c12. By contrast, c9t11 had no effect. The concentrations of CLA and the two isomers in the plasma membrane were increased when they were added to the incubation medium. However, they did not alter the levels of arachidonic acid in plasma membrane. To assess whether the proliferation inhibiting effect of CLA was related to changes in eicosanoid production, prostaglandin E$_2$(PGE$_2$) and leukotriene B$_4$(LTB$_4$) concentrations in conditioned media were estimated by a competitive enzyme immunoassay. Both CLA and t10c12 increased the production of materials reactive to PGE$_2$ and LTB$_4$ antibodies in a dose-dependent manner. By contrast, c9t11 had no effect. These results indicate that inhibition of HT-29 cell proliferation by CLA is attributed to the effect of the t10v12 isomer. The materials reactive to PGE$_2$ and LTB$_4$ antibodies may inhibit growth stimulatory effect of arachidonic acid-derived eicosanoids on HT-29 cell proliferation.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.5
• /
• pp.1647-1652
• /
• 2012

With the objective to design and synthesis of Schiff's base symmetrical liquid crystal dimmers and to study the effect of molecular structure variation ($o-ortho$, $m-meta$, $p-para$) and change in alkoxy terminal chain length on mesomorphic properties of liquid crystals, We have synthesized Schiff base dimers from dialdehyde derivative containing 2-hydroxy-1,3-dioxypropylene as short spacer with aniline derivatives having different lengths of terminal alkoxy chains ($n$ = 5, 7, 9). The chemical structure of the final products was characterized by proton nuclear magnetic resonance ($^1H$ NMR) spectroscopy and fourier transform infrared (FT-IR) spectroscopy. The mesomorphic properties and optical textures of the resultant dimers were characterized by differential scanning calorimetry (DSC) and polarized optical microscopy (POM). The existence of smectic A phase transition was confirmed by the observation of batonnets and fan shaped textures in optical microscopy when compound were heated from crystalline phase. All of the dimers of this series, with the exception of $\mathbf{2S_5}$ -ortho, -meta, -para, were thermotropic liquid crystal. The compound $\mathbf{2S_9}$ -meta was monotropic, while the rest were enantiotropic. It was found that the change in terminal alkoxy chain length has pronounced effect on the mesomorphic properties. The temperature range of smectic A phase window widens with increasing alkoxy chain length.

• Radiation Oncology Journal
• /
• v.12 no.3
• /
• pp.295-300
• /
• 1994

It was the purpose of present study to develop a new thermoseed for heating deep-seated tumors and assessment of the effect of magnetic control on thermoseeds. Aqueous suspension of iron micro spheres (Ferropolysaccharide) was injected directly into the VX-2 hepatoma and heated with 1.2 MHz inductive radiofrequency unit. Aqueous thermoseed suspension was delivered to the tumor by simple percutaneous injection. The limitation of the thermoseed heating method is the positional change of thermoseed particles in the tumor after implantation. The thermoseed particles could enter the systemic blood circulation and cause a severe embolization of a critical organ. To minimize this limitation, we have used the magnetic control after loading the thermoseed in the tumor, W hen ferropolysaccharides were exposed to a strong magnetic field, they magnetized and subsequently exerted a magnetic force on each other, forming larger aggregates of particles. The size of aggregated Particles were too big to enter the systemic blood circulation. Thus, unlike other thermoseed method, we hold the thermoseed particles stationary in the tumor. The temperature of the injected site and immediate vicinity elevated by $4-5^{\circ}C$. The temperature of the surrounding normal hepatic tissue elevated by $1-2^{circ}C$ only. The heating effect within the tumor was variable depending on the density of ferromagnetic aqueous suspension. Our results suggest that inductive heating of tumor injected with ferropolysaccharide solution offers the possibility of effective heat delivery to the defined tumor volume, which is difficult to heat with other heating devices.

• The Journal of Korean Academy of Prosthodontics
• /
• v.25 no.1
• /
• pp.17-40
• /
• 1987

The purpose of this study was to clarify the effect of clasp design on abutment tooth adjacent to a distal extension base under the influence by the location of functional loading. The RPI clasp, the Akers clasp and the combination clasp were selected for evaluation. Tests were performed at 10Kg, 20Kg, 30Kg loads on the buccal, central, lingual, mesial and distal positions of loading platform of each mandibular distal extension partial denture. The laser reflexion method was used for three dimensional measurement of abutment movement, which is possible to measure precisely without contact. The movement in the mesiodistal(X), buccolingual(Y), and occlusoapical(Z) directions and the rotational movement(R) were measured, and in addition, the total movement (SV) as expressed by the three dimensional summation vector independent of direction was calculated. The data were analyzed using Student t-test, p<.05. The following results were obtained from this study; 1. Clasp design did not generally affect the direction of abutment tooth movement except the movement in an undesirable occlusal direction in case of the Akers clasp and the combination clasp. 2. The greater the load on the prosthesis, the greater was the abutment tooth movement, and the direction of abutment tooth movement was affected by positional loading. 3. Each prosthesis was dislodged from the test base under the small amount of load in the distal load position, and the buccal loading showed the greatest abutment tooth movement under the maximum load. 4. RPI clasp was evaluated as the most favorable design.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.3 s.35
• /
• pp.143-150
• /
• 2005

Camera image is very sensitive to illumination that result in difficulties for recognizing character. Also Camera captured document images have not only skew but also vignetting effect and geometric distortion. Vignetting effect make it difficult to separate characters from the document images. Geometric distortion, occurred by the mismatch of angle and center position between the document image and the camera, make the shape of characters to be distorted, so that the character recognition is more difficult than the case of using scanner. In this paper, we propose a method that can increase the performance of character recognition by correcting the geometric distortion of document images using a linear approximation which changes the quadrilateral region to the rectangle one. The proposed method also determine the quadrilateral transform region automatically, using the alignment of character lines and the skewed angles of characters located in the edges of each character line. Proposed method, therefore, can correct the geometric distortion without getting positional information from camera.

• Journal of Nutrition and Health
• /
• v.37 no.3
• /
• pp.182-192
• /
• 2004

Conjugated linoleic acid (CLA) is the mixture of positional and geometric isomers of linoleic acid (LA), which is found abundantly in dairy products and meats. This study was performed to investigate the anticarcinogenic effect of CLA in HepG2 hepatoma cells. HepG2 cell were treated with LA and CLA at the various concentrations of 10, 20, 40, 80 uM each at different incubation times. After each incubation times, cell proliferation, fatty acids incorporation into cell, peroxidation and postaglandin E$_2$ (PGE$_2$) and thromboxane $A_2$ (TXA$_2$) for the eicosanoid metabolism were measured. LA treated HepG2 cells were increased cell growth 6 - 70％ of control whereas CLA increased cell death the half of those in LA group (p 〈 0.001). LA and CLA were incorporated very well into the cellular membranes four times higher than in control according to concentration and longer incubation times. Moreover, LA synthesized significantly arachidonic acids corresponding with LA concentration compared to CLA supplementation. The supplementation with LA increased intracellular lipid peroxides concentration corresponding with LA concentration and five times higher than those in CLA significantly at any incubation times (p 〈 0.001). PGE$_2$ and TXA$_2$ levels were three to twenty times lower in condition of CLA treatments than LA, respectively. Overall, the dietary CLA might change the HepG2 cell growth by the changes of cell composition, production of lipid peroxide. Since CLA have not changed the levels of arachidonic acid of cell membrane, which was sources of eicosanoids, eicosanoid synthesis was not increased in CLA compared to LA. Our results was suggest CLA has a possibility to protect the progress of atherosclerosis because CLA does not produce lipid production and endothelial contraction factors in liver.

• Korean Journal of Breeding Science
• /
• v.42 no.2
• /
• pp.144-150
• /
• 2010

The objective of this study was to map gene/QTL for photoblastism in a weedy rice (photoblastic rice: PBR) using DNA markers. Light-induced effect on germination of seeds was compared among three accessions (Oryza sativa L.), PBR, Milyang 23 and Ilpum. Results showed that PBR seeds started to show photoblastism during seed development, different from Ilpum and Milyang 23. Frequency distribution of germination in the F4 lines from crosses between Ilpum and PBR and, Milyang 23 and PBR revealed bimodal distributions suggesting that photoblastism was controlled by a few genes. Bulked segregant analysis using $F_4$ populations derived from the above two crosses was conducted to identify gene/QTL for photoblastism. Two QTL were identified on chromosomes 1 and 12 explaining 11.2 and 12.8% of the phenotypic variance, respectively. Two QTL were further mapped between two SSR markers, RM8260 and RM246 on chromosome 1, and between RM270 and 1103 on chromosome 12. It is noteworthy that two QTL for photoblastism were colocalized with the QTL for seed dormancy reported in the previous QTL studies. The clustering of two genes for photoblastism and dormancy possibly indicates that these regions constitute rice phytochrome gene clusters related to germination. Because PBR has a low degree of dormancy, a pleiotropic effect of a single gene controlling dormancy and photoblastism can be ruled out. The linked markers will provide the foundation for positional cloning of the gene.