• Journal of Power Electronics
• /
• 제9권3호
• /
• pp.499-506
• /
• 2009

In this paper, the initial pole-position estimation of a surface (non-salient) permanent magnet synchronous motor is mathematically analyzed and surveyed on the basis of simulation analysis, and developed for accurate servo motor drive. This algorithm is well carried out under the full closed-loop position control without any pole sensors and is completely insensitive to any motor parameters. This estimation is based on the principle that the initial pole-position is simply calculated by the reverse trigonometric function using the two feedback currents in the full closed-loop position control. The proposed algorithm consists of the predefined reference position profile, the information of feedback currents, speed, and relative position, and the reverse trigonometric function for the initial-pole position estimation. Comparing with the existing researches, the mathematical analysis is introduced to get a more accurate initial pole-position of the surface permanent magnet motor under the closed-loop position control. It is found that the proposed algorithm can be easily applied in servo drive applications because it satisfies the following user's specifications; accuracy and moving distance.

• Structural Engineering and Mechanics
• /
• 제11권6호
• /
• pp.617-636
• /
• 2001

For the potential application of smart materials to seismic structural control, this paper reviews seismic control techniques for civil engineering structures, and developments of smart materials for vibration and noise control. Analytical and finite element methods adopted for the design of distributed sensors/actuators using piezoelectric materials are discussed. Investigation of optimum position of sensors/actuators and damping are also outlined.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.486-489
• /
• 2004

In this paper, we try to detect the peel out effect and find the strain difference between the main structure and retrofitting patch material when they separate from each other. In the experiment, two fiber optic Bragg grating sensors are applied to the main concrete structure and the patching material separately at the same position. The sensors show coincident behaviors at the initial loading, but different behaviors after a certain load. The test results show the possibility of optical fiber sensor monitoring of beam structures retrofitted by the composite patches.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.309.1-309
• /
• 2002

This paper is concerned with the dynamic modeling of a rectangular plate with piezoelectric actuators and sensors. The experimental frequency response plots can be used to verify the theoretical modeling. The active vibration control was achived by using positive position feedback controller. Theoretical analysis will follow.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.71-74
• /
• 1992

This paper describes the automation of the surface grinder for a grinding wheel by application of programmable logic controller(PLC) with a position sensor, and a limit switch. The control system is designed to provide feeding a workpiece on the turn table and pressing it by the upper disk automatically. In this development the automation of checking the thickness of a grinding wheel is most important. In order to measure the relative displacement, the proximity sensors were employed and the sensitivities of the sensors were investicated and discussed the superiority. It has been shown by model experiment that the automation system of the surface grinder is performed satisfactory.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 I
• /
• pp.471-475
• /
• 2001

This paper is concerned with the experiments on the dynamic characteristics and active vibration control of plate with piezoceramic sensors and actuators. The experimental frequency response plots can be used to verify the theoretical modeling. The active vibration control was achived by using a single-input single-output positive position feedback controller. Theoretical analysis will follow.

• 한국위성정보통신학회논문지
• /
• 제10권1호
• /
• pp.56-61
• /
• 2015

본 논문에서는 사물인터넷(IoT, Internet of Things) 사용자가 안드로이드 플랫폼 기반의 홈 허브가 유니티 3D 모델링으로 사물인터넷 센서의 3D 위치표출 방안이 제안되었다. 특별히, 3차원 공간에서 IoT 센서는 설치 공간별로 클러스링을 통해 IoT센서 속성과 배터리 상태를 모니터링 방식을 설계한다. 또한, 3차원 공간상에서 신규 설치한 IoT 센서가 인접 센서들의 무선신호의 비콘신호 및 도착시간 분석에 따른 센서의 위치를 추적하는 방식은 센서의 무선신호세기(RSSI, received signal strength indicator)와 방위각을 기반으로 3차원 공간상에서 수신 각도에 따른 센서의 3D 위치를 표출할 수 있다. 이때 유니티 런쳐가 탑재된 스마트 허브 플랫폼은 사물인터넷 센서의 동작상태 모니터링이 가능하며, 다양한 센서의 생애주기를 관리할 수 있도록 동영상이 3차원 텍스쳐가 동시에 연동하도록 활용할 수 있다.

• 한국항공우주학회지
• /
• 제37권10호
• /
• pp.1002-1009
• /
• 2009

본 논문에서는 저가의 스트랩다운 센서 및 탐색기 기반의 정밀한 유도필터 설계를 다룬다. 고려된 스트랩다운 센서는 3축의 가속도계와 자이로로 구성된 IMU, 3 축 자기장계 및 압력고도계이다. 유도탄의 위치, 속도, 자세 및 압력고도계의 바이어스 오차가 유도필터의 상태변수로 고려된다. 상태방정식 및 측정방정식의 비선형성이 크기 때문에 UKF(Unscented Kalman Filter)를 도입한다. 제안된 유도필터는 표적 위치오차가 없을 경우 항법필터로 동작한다. 표적오차가 존재하는 경우에도 유도탄-표적간 상대 정보를 정확히 추정함으로서 정밀한 유도성능을 보장한다. 특수한 교전상황에서는 유도필터의 가관측성 문제가 발생함이 확인되었다.

• Physical Therapy Rehabilitation Science
• /
• 제8권3호
• /
• pp.146-151
• /
• 2019

Objective: The purpose of this study was to investigate the test-retest reliability and concurrent validity of the joint angle of the lower extremities during sit-to-stand movements with wearable sensors based on a portable gait analysis system (PGAS), and the results were compared with a analysis system (MAS) to predict the clinical potential of it. Design: Cross-sectional study. Methods: Sixteen persons with stroke (9 males, 7 females) participated in this study. All subjects had the MAS and designed PGS applied simultaneously and eight sensor units of designed PGAS were placed in a position to avoid overlap with the reflexive markers from MAS. The initial position of the subjects was 90º of hip, knee, and ankle joint flexion while sitting on a chair that was armless and backless. The height of the chair was adjusted to each individual. After each trial, the test administrator checked the quality of data from both systems that measured sit-to-stand for test-retest reliability and concurrent validity. Results: As a result, wearable sensor based designed PGAS and MAS demonstrated reasonable test-retest reliability for the assessment of joint angle in the lower extremities during sit-to-stand performance. The intra-class correlation coefficients (ICCs) for wearable sensor based designed PGAS showed an acceptable test-retest reliability, with ICCs ranging from 0.759 to 0.959. In contrast, the MAS showed good to excellent test-retest reliability, with ICCS ranging from 0.811 to 0.950. In concurrent validity, a significant positive relationship was observed between PGAS and MAS for variation of joint angle during sit-to-stand movements (p<0.01). A moderate to high relationship was found in the affected hip (r=0.665), unaffected hip (r=0.767), affected knee (r=0.876), unaffected knee (r=0.886), affected ankle (r=0.943) and unaffected ankle (r=0.823) respectively. Conclusions: The results of this study indicated that wearable sensor based designed PGAS showed acceptable test-retest reliability and concurrent validity in persons with stroke for sit-to-stand movements and wearable sensors based on developed PGAS may be a useful tool for clinical assessment of functional movement.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 F
• /
• pp.2136-2138
• /
• 1997

This paper describes a new detecting method of initial rotor position for PMSM without a position sensors. The proposed method uses the fact that the back-EMF is differently generated according to tile initial rotor position of Permanent Magnet Synchronous Motor (PMSM). The voltage with short duty is impressed to each phase at standstill. Then, we can detect the rotor position by comparing the amplitudes and signs of three phase current each other. Experimental results show the validity of the proposed method.