Structural Engineering and Mechanics

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Review of seismic vibration control using 'smart materials'

  • Valliappan, S. (School of Civil and Environmental Engineering, The University of New South Wales) ;
  • Qi, K. (School of Civil and Environmental Engineering, The University of New South Wales)
  • Published : 2001.06.25
⟨ Previous Next ⟩

Abstract

For the potential application of smart materials to seismic structural control, this paper reviews seismic control techniques for civil engineering structures, and developments of smart materials for vibration and noise control. Analytical and finite element methods adopted for the design of distributed sensors/actuators using piezoelectric materials are discussed. Investigation of optimum position of sensors/actuators and damping are also outlined.

Keywords

References

  1. Agnes, G., and Napolitano, K. (1993), "Active constrained layer viscoelastic damping", Proc. 34th AIAA/ASME/ ASCE/AHS/ASC Structures, Struct. Dyn. and Mater. Conf., 3499-3506.
  2. Allik, H., and Hughes, T.J.R. (1970), "Finite element method for piezoelectric vibration", Int. J. Numer. Meth. Eng., 2, 151-157. https://doi.org/10.1002/nme.1620020202
  3. Bailey, T., and Hubbard, J.E. (1985), "Distributed piezoelectric polymer active vibration of a cantilever beam", J. of Guidance, Control and Dynamics, 8(5), 606-610.
  4. Baz, A., and Ro, J. (1995a), "Vibration control of plates with active constrained layer damping", Proc. SPIE Conf. on Smart Structures and Materials 1995 Passive Damping, C. D. Johnson, ed., San Diego, California, 2445, 393-409.
  5. Baz, A., and Ro, J. (1995b), "Optimum design and control of active constrained layer damping", Special 50th Anniversary Design Issue, ASME, 117, 135-338.
  6. Buckle, I.G., and Mayes, R.L. (1990), "Seismic isolation: history, application, and performance a world review", Earthquake Spectra, 6(2), 161-201. https://doi.org/10.1193/1.1585564
  7. Caughey, T.K. (1998), "The potential and challenge of applying structural control to large civil engineering structures", Proc. of The Second World Conference on Structural Control, Kyoto, Japan, 1, 35-40.
  8. Crawley, E.F., and de Luis, J. (1987), "Use of piezoelectric actuators as elements of intelligent structures", AIAA J., 25(10), 1373-1385. https://doi.org/10.2514/3.9792
  9. Crawley, E.F., and Lazarus, K.B. (1989), "Induced strain actuation of composite plates", AIAA Paper 89-1326-CP, 30th AIAA Structural Dyn. and Mater. Conf., Mobile, Alabama.
  10. Crawley, E.F., and Lazarus, K.B. (1991), "Induced strain actuation of isotropic and anisotropic plates", AIAA J., 95(6), 944-951.
  11. Ehrgott, R.C., and Masri, S.F. (1992), "Modelling the oscillatory dynamics behaviour of electro-rheological materials in shear", Smart Mater. and Struct., 1(4), 275-285. https://doi.org/10.1088/0964-1726/1/4/002
  12. Fanson, J.L., and Caughey T.K. (1987), "Positive position feedback control for large space structures", Proc. of AIAA/ASME/ASCE/AHS 28th Structures, Struct. Dyn. and Mater. Conf., Monterey, CA, AIAA Paper 87-0902.
  13. Franco Correia, V.M., Mota Soares, C.M., and Mota Soares, C.A. (1999), "A numerical model for the optimal design of composite laminated structures with piezoelectric laminate", Proc. SPIE Conf. on Smart Struct. and Materials, Mathematics and Control in Smart Structures, Newport Beach, California, 3667, 427-437.
  14. Fujita, T., Nonaka, H., Yang, C.S., Kondo, H., Mori, Y., and Amasaka, T. (1998), "Active vibration control of frame structures with smart structure using magnetostrictive actuators", Proc. SPIE Conf. on Smart Struct. and Integ. Sys., San Diego, CA., 3329, 584-594.
  15. Ghosh, K., and Batra, R.C. (1994), "Shape control of plates using piezoelectric elements", Proc. SPIE Conf. on Active Mater. and Smart Struct., Texas A&M Univ., USA, 2427, 107-121.
  16. Guyan, R.J. (1965), "Reduction of stiffness and mass matrices", AIAA J., 3, 380. https://doi.org/10.2514/3.2874
  17. Ha, S.K., Keilers, C., and Chang, F.K. (1992), "Finite element analysis of composite structures containing distributed piezoceramic sensors and actuators", AIAA J., 30(3), 772-780. https://doi.org/10.2514/3.10984
  18. Hanagud, S., Obal, M.W. and Calise, A.J. (1987), "Optimal vibration control by the use of piezoelectric sensors and actuators", Proc. of AIAA/ASME/ASCE/AHS 28th Structures, Struct. Dyn. and Mater. Conf., Monterey, CA, AIAA, 87-0959.
  19. Heyliger, P., and Ramirez, G. (1994), "Coupled discrete finite layer elements for laminated piezoelectric plates", Communications in Appl. Numer. Meth. in Eng., 10, 971-981. https://doi.org/10.1002/cnm.1640101203
  20. Housner, G.W., Bergman, L.A., Caughey, T.K., Chassiakos, A.G., Clauss, R.O., Masri, S.F., Skelton, R.E., Soong, T.T., Spencer, B.F., and Yao, J.P.T. (1997), "Structural control: Past, present and future", J. Eng. Mech., ASCE, 123(9), 897-971. https://doi.org/10.1061/(ASCE)0733-9399(1997)123:9(897)
  21. Huang, S.C., Inman, D.J., and Austin, E.M. (1996), "Some design considerations for active and passive constrained layer damping treatments", Smart Mater. and Struct., 5, 301-313. https://doi.org/10.1088/0964-1726/5/3/008
  22. Hwang, W.S., and Park, H.C. (1993), "Finite element modelling of piezoelectric sensors and actuators", AIAA J., 31(5), 930-937. https://doi.org/10.2514/3.11707
  23. Kameda, T., Fujita, T., Hatayama, T., Arikabe, T., Murai, N., Aizawa, S., and Tohyama, K. (1997), "Active vibration control of frame structures of shear and bending type with smart structure using piezoelectric actuator", Proc. of SPIE Conf. on Smart Structures and Integrated Systems, San Diego, California, 3041, 75- 86.
  24. Kang, Y.K., Park, H.C., Hwang, W., and Han, K.S. (1996), "Optimal placement of piezoelectric sensor/actuator for vibration control of laminated beams", AIAA J., 34(9), 1921-1926. https://doi.org/10.2514/3.13326
  25. Kelly, J.M. (1986), "Seismic base isolation: review and bibliography", Soil Dyn. and Earthq. Eng., 5, 202-216. https://doi.org/10.1016/0267-7261(86)90006-0
  26. Kim, S.J., and Jones, D.J. (1991), "Optimal design of piezoactuators for active noise and vibration control", AIAA J., 29(2), 2047-2053. https://doi.org/10.2514/3.10840
  27. Kim, J., Varadan, V.V., and Varadan, V.K. (1997), "Finite element modelling of structures including piezoelectric active devices", Int. J. Numer. Meth. Eng., 40, 817-832. https://doi.org/10.1002/(SICI)1097-0207(19970315)40:5<817::AID-NME90>3.0.CO;2-B
  28. Kirby, G.C., Matic, P., and Lindner, D.K. (1994), "Optimal actuator size and location using genetic algorithms for multivariable control", Adapt. Struct. and Composite Mater.: Analysis and Application, ASME, E. Garcia, ed., AD-Vol. 45/MD-Vol. 54, 325-335.
  29. Lee, H.J., and Saravanos, D.A. (1997), "Generalised finite element formulation for smart multilayered thermal piezoelectric composite plates", Int. J. Solid and Structures, 34(26), 3355-3371. https://doi.org/10.1016/S0020-7683(96)00215-6
  30. Lee, H.J., and Saravanos, D.A. (1999), "A mixed multi-field finite element formulation for Thermopiezoelectric composite shells", Proc. SPIE Conf. on Smart Struct. and Mat., Mathematics and Control in Smart Structures, Newport Beach, California, 3667, 449-460.
  31. Lee-Glauser, G.J., Ahmadi, G., and Horta, L.G. (1997), "Integrated passive/active vibration absorber for multistory buildings", J. Struct. Eng., ASCE, 123(4), 499-504. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:4(499)
  32. Lesieutre, G.A., and Lee, U. (1996), "A finite element for beams having segmented active constrained layer with frequency-dependent viscoelastics", Smart Mater. and Struct., 5, 615-627. https://doi.org/10.1088/0964-1726/5/5/010
  33. Liao, W.H., and Wang, K.W. (1997), "On the active-passive hybrid control actions of structures with active constrained layer treatment", J. of Vib. and Acoustics, 129, 563-572.
  34. Liao, W.H., and Wang, K.W. (1998), "Characteristics of enhanced active constrained layer damping treatments with edge elements, part 1: Finite element model development and validation", J. of Vib. and Acoustics, 120, 886-893. https://doi.org/10.1115/1.2893916
  35. Lim, Y.H., Varadan, V.V., and Varadan, V.K. (1996), "Finite element modelling of the transient response of smart structures", Proc. SPIE Conf. on Smart Struct. and Materials, Mathematics and Control in Smart Struct., San Diego, California, 2715, 233-242.
  36. Main, J.A., Garcia, E., and Howard, D. (1994), "Optimal placement and sizing of paired piezoactuators in beams and plates", Smart Mater. and Struct., 3, 373-381. https://doi.org/10.1088/0964-1726/3/3/013
  37. Makris, N., Constantinou, M.C., and Dargush, G.F. (1993), "Analytical model of viscoelastic liquid dampers", J. Struct. Eng., ASCE, 119, 3310-3325. https://doi.org/10.1061/(ASCE)0733-9445(1993)119:11(3310)
  38. Masri, S.F., Miller, R.K., Dehghanyar, T.J., and Caughey, T.K. (1989), "Active parameter control of nonlinear vibrating structures", J. of Appl. Mechanics, ASCE, 56, 658-666. https://doi.org/10.1115/1.3176143
  39. Mita, A., and Feng, M.Q. (1994), "Vibration control strategy for tall buildings using interaction between mega and sub-structures", Proc., Int. Workshop on Civil Infrastructural System, 329-341.
  40. Naillon, M., Coursant, R.H., and Besnier, F. (1983), "Analysis of piezoelectric structures by a finite element method", Acta Electronica, 25(4), 341-362.
  41. Panda, S.C., and Natarajan, R. (1979), "Finite element analysis of laminated composite plates", Int. J. for Numer. Meth. Eng., 14, 69-79. https://doi.org/10.1002/nme.1620140106
  42. Ray, M.C., Bhattacharyya, R., and Samanta, B. (1994), "Static analysis of an intelligent structure by the finite element method", Comput. & Struct., 52(4), 617-631. https://doi.org/10.1016/0045-7949(94)90344-1
  43. Reddy, J.N. (1995), Theory and Analysis of Laminated Composite Structures, John Wiley, New York.
  44. Reddy, J.N., and Robins, D.H. Jr. (1994), "Structural theories and computational models for composite laminates", Appl. Mech. Review, 47(6), 147-170. https://doi.org/10.1115/1.3111076
  45. Reinhorn, A., and Riley, M.A. (1994), "Control of bridge vibrations with hybrid devices", Proc., 1st World Conf. on Struct. Control, TA2: 50-59.
  46. Samanta, B., Ray, M.C., and Bhattacharyya, R. (1996), "Finite element model for active control of intelligent structures", AIAA J., 34(9), 1885-1893. https://doi.org/10.2514/3.13322
  47. Saravanos, D.A. (1997), "Mixed laminated theory and finite element for smart piezoelectric composite shell structures", AIAA J., 35(8), 1327-1333. https://doi.org/10.2514/2.264
  48. Saravanos, D.A., Heyliger, P.R., and Hopkins, D.A. (1997), "Layerwise mechanics and finite element for the dynamic analysis of piezoelectric composite plates", Int. J. of Solids and Struct., 34(3), 359-378. https://doi.org/10.1016/S0020-7683(96)00012-1
  49. Shen, I.Y. (1994), "Bending vibration control of composite plate structures though intelligent constrained layer damping treatments", Proc. SPIE Conf. On Smart Struct. and Materials 1994 Passive Damping, (ed. by C. D. Johnson), Orland, Florida, 2193, 115-125.
  50. Shen, K.L., and Soong, T.T. (1995), "Modelling of viscoelastic dampers for structural application", J. of Eng. Mech., ASCE, 121(6), 694-701. https://doi.org/10.1061/(ASCE)0733-9399(1995)121:6(694)
  51. Shinozuka, M., Constantinou, M.C., and Ghanem, R. (1992), "Passive and active fluid dampers in structural application", Proc., U. S./China/Japan Work. on Struct. Control, 507-516.
  52. Sirohi, J., and Chopra, I. (1998), "Fundamental behaviour of piezoceramic sheet actuators", Proc., SPIE Conf. on Smart Struct. and Integrated Sys., San Diego, CA, 3329, 626-646.
  53. Skinner, R.I., Kelly, J.M., and Heine, A.J. (1975), "Hysteresis dampers for earthquake-resistant structures." Earthq. Eng. and Struct. Dyn., 3, 287-296.
  54. Soong, T.T. (1988), "State-of-the-art review: Active control in civil engineering", Eng. Struct., 10, 74-84. https://doi.org/10.1016/0141-0296(88)90033-8
  55. Soong, T.T., and Dargush, G.F. (1997), Passive Energy Dissipation Systems in Structural Engineering, John Wiley & Sons, Inc., New York, N. Y.
  56. Suzuki, T., Kageyama, M., Nobata, A., Inaba, S., and Yoshida, O. (1994), "Active vibration control system installed in a high-rise building", Proc., 1st World Conf. on Struct. Control, pp. FP3:3-11.
  57. Tzou, H.S., and Tseng, C.I. (1990), "Distributed piezoelectric sensor/actuator design for dynamic measurement/ control of distributed parameter systems: a piezoelectric finite element approach", J. Sound and Vibration, 138(1), 17-34. https://doi.org/10.1016/0022-460X(90)90701-Z
  58. Tzou, H.S., and Tseng, C.I. (1991), "Distributed vibration control and identification of coupled elastic/ piezoelectric systems: finite element formulation and application", Mechanical Systems and Signal Processing, 5(3), 215-231. https://doi.org/10.1016/0888-3270(91)90044-6
  59. Tzou, H.S., and Ye, R. (1996), "Analysis of piezoelastic structures with laminated piezoelectric triangle shell elements", AIAA J., 34(1), 110-115. https://doi.org/10.2514/3.12907
  60. Van Nostrand, W.C., Knowles, G.J., and Inman, D.J. (1994), "Finite element model for active constrained-layer damping", Proc., SPIE Conf. on Smart Struct. and Mater., 2193, 126-137.
  61. Varadan, V.V., Lim, Y.H., and Varadan, V.K. (1996), "Closed loop finite element modelling of active/passive damping in structural vibration control", Smart Mater. and Struct., 5, 685-694. https://doi.org/10.1088/0964-1726/5/5/016
  62. Veley, D.E., and Rao, S.S. (1996), "A comparison of active, passive and hybrid damping treatment in structural design", Proc. SPIE Conf. on Smart Structures and Materials, San Diego, California, 2720, 184-195.
  63. Villaverde, R. (1994), "Seismic control of structures with damped resonant appendages", Proc. of 1st World Conf. on Structural Control, 1, pp. WP4: 113-122.
  64. Wang, B.T., Burdisso, R.A., and Fuller, C.R. (1994), "Optimal placement of piezoelectric actuators for active structural control", J. of Intelligent Material Systems and Structures, 5(1), 67-77. https://doi.org/10.1177/1045389X9400500108
  65. Wang, B.T., and Rogers, C.A. (1991), "Laminated plate theory for spatially induced strain actuators", J. of Compos. Mater, 25, 433-452. https://doi.org/10.1177/002199839102500405
  66. Wu, H.T., and Chang F.K. (1989), "Transient dynamic analysis of laminated composite plates subject to transverse impact", Comput. & Struct., 31(3), 453-466. https://doi.org/10.1016/0045-7949(89)90393-3

Cited by

  1. Vibration Control Design for a Plate Structure with Electrorheological ATVA Using Interval Type-2 Fuzzy System vol.7, pp.7, 2017, https://doi.org/10.3390/app7070707
  2. Optimal Vibration Control of a Model Frame Structure Using Piezoceramic Sensors and Actuators vol.11, pp.5, 2005, https://doi.org/10.1177/1077546305053396
  3. Loop Shaping Control of a Model-Story Building Using Smart Materials vol.19, pp.7, 2008, https://doi.org/10.1177/1045389X07080222
  4. Vibration control of civil structures using piezoceramic smart materials: A review vol.28, pp.11, 2006, https://doi.org/10.1016/j.engstruct.2006.02.002
  5. Optimal number and placements of piezoelectric patch actuators in structural active vibration control vol.21, pp.6, 2004, https://doi.org/10.1108/02644400410545218
  6. Smart materials and structures—a finite element approach—an addendum: a bibliography (1997–2002) vol.11, pp.5, 2003, https://doi.org/10.1088/0965-0393/11/5/302
  7. Guide to the Literature of Piezoelectricity and Pyroelectricity. 21 vol.300, pp.1, 2004, https://doi.org/10.1080/00150190490447998a
  8. Experimental Investigation on a Cable Structure Equipped with an Electrodynamic Damper and Its Monitoring Strategy through Energy Harvesting vol.19, pp.11, 2001, https://doi.org/10.3390/s19112631