• Journal of Biosystems Engineering
• /
• v.4 no.1
• /
• pp.1-23
• /
• 1979

The use of barley seeder attached to rotary tiller in the rural area has a significant meaning not only for the solution of labor peak season, but also for the increase of land utilization efficiency. The facts that presently being used barley seeders are all based on the mechanical principles of the reverse rotation, center drive and are all using forward rotating tine, which is used to be easily and heavily worn out when it rotates reversely, raise problem of recommending them to rural area in Korea. Therefore, the main objective of the study was to develop new type of rotary tine attachable to barley seeders. To attain the objective the following approaches were applied. (1) The kinematic analysis of reverse rotating barley seeders. (2) The studies on the soil bin and artificial soil. (3) The comparative experiment on the power requirement of prototype tine. The results obtained from the studies are summarized as follow: 1. The kinematic analysis of barley seeder attached to rotary tiller: The following results were obtained from the kinematic analysis for deriving general formulae of the motion and velocity characterizing the rotary tine of barley seeders presently being used by farmers. a) The position vector (P) of edge point (P) in the rotary tine of reverse rotating, center drive was obtained by the following formula. $$P=(vt+Rcos wt)i+Rsin wt j+ \{ Rcos \theta r sin \alpha cos (wt- \beta +\theta r) +Rsin \theta r sin \alpha sin (wt-\beta + \theta r) \} lk $$ b) The velocity of edge point $(P^')$ of reverse rotating, center drive rotary tine was obtained by the following formula. $$(P^')=(V-wR sin wt)i+(w\cdot Rcoswt)j + \{ -w\cdot Rcos \theta r\cdot sin \alpha \cdot sin (wt-\beta +\theta r) + w\cdot Rsin \theta r\cdot sin \alpha \cdot cos (wt- \beta + \theta r \} k $$ c) In order to reduce the power requirement of rotary tine, the angle between holder and edge point was desired to be reduced. d) In order to reduce the power requirement, the edge point of rotary tine should be moved from the angle at the begining of cutting to center line of machine, and the additional cutting width should be also reduced. 2. The studies on the soil bin and artificial soil: In order to measure the power requirement of various cutting tines under the same physical condition of soil, the indoor experiments Viere conducted by filling soil bin with artificially made soil similar to the common paddy soil and the results were as follows: a) When the rolling frequencies$(x)$ of the artificial soil were increased, the densIty$(Y)$ was also increased as follows: $$y=1.073200 +0.070780x - 0.002263x^2 (g/cm^3)$$ b) The absolute hardness $(Y)$ of soil had following relationship with the rolling frequencies$(x)$ and were increased as the rolling frequencies were increased. $$Y=37.74 - \frac {0.64 + 0.17x-0. 0054x^2} {(3.36-0.17x + 0.0054x^2)^3} (kg/cm^3)$$ c) The density of soil had significant effect on the cohesion and angle of internal friction of soil. For instance, the soil with density of 1.6 to 1.75 had equivalent density of sandy loam soil with 29.5% of natural soil moisture content. d) The coefficient of kinetiic friction of iron plate on artificial soil was 0.31 to 0.41 and was comparable with that of the natural soil. e) When the pulling speed of soil bin was the 2nd forward speed of power tiller, the rpm of driving shaft of rotary was similar to that of power tiller, soil bin apparatus is indicating the good indoor tester. 3. The comparative experiment on the power requirement of prototype tine of reverse rotating rotary: According to the preliminary test of rotary tine developed with various degrees of angle between holder and edge pcint due to the kinematic analysis, comparative test between prototype rotary tine with $30 ^\circ $ and $10 ^\circ$ of it and presently being used rotary tine was carried out 2nd the results were as follows: a) The total cutting torque was low when the angle between holder and edge point was reduced. b) $\theta r$ (angle between holder and edge point) of rotary tine seemed to be one: of the factors maximizing the increase of torque. c) As the angle between holder and edge point ($\theta r$) of rotary tine was $30 ^\circ $ rather than $45 ^\circ $, the angle of rotation during cutting soil was reduced and the total cutting torque was accordingly reduced about 10%, and the reduction efficiency of total cutting torque was low when the angle between holder and edge point ($\theta r$) of rotary tine was $10 ^\circ $, which indicates that the proper angle between holder and edge point of rotary tine should be larger than $10 ^\circ $ and smaller than $30 ^\circ $ . From above results, it could be concluded that the use of the prototype rotary tine which reduced the angle between holder and edge point to $30 ^\circ $, insted of $45 ^\circ $, is disirable not only decreasing the power requirements, but also increasing the durabie hour of it. Also forward researches are needed, WIlich determine the optimum tilted angle of rotary brocket, and rearrangement of the rotary tine on the rotary boss.

• Archives of design research
• /
• v.11 no.1
• /
• pp.185-197
• /
• 1998

The domestic publishing market has heen ranked at No.7 in the word publishing market(stastics material in Cultu re and Gymnastics m inistrv )Es pe cia Ill'. publishing quantity of children'book is about to reacb No.3. Such a publishing condition i." showing that Korean publishing world has limit,llion of kind and genre despite of its quant.iative improvement On the ot.her hand. t',reign juvenile publi."hing has multi-publishing form, which is a simultaneous publishing with dolls, audio stuff, game programs and CD-ROM t.itles. Even the animation is considered as of the publication at the planning s tsge. However, when we take a look at domestic condition we come to know that Korean juvenile publishing has been occupied mostly by the studying book. Also, the cautious book selection by the well educated parents in l990's has brought up the change of juvenile publishing world. Such a presen t condition bears of juvenlie publi.,;hing world. Such a present condition bears problem, which is the checking 190 translat.ions among the published picture- books of the last ye ar children's book Nevertheless, there was a sucessful domestic planned creative picture book last year. That is "Puppy s shit", which was sold out 15 000 copies and be st se ller of children's book. Whe n we take a look at the commercial success of "Puppy s shit", it is possible that domestic work holds a position in the publishing market. "Puppy s shit" is the story about valuable nature with Korean styled illustration, which tells the prefemece of Korean book in do mestic pu blis hin f.i market. With the motto "Finding prospect of the Korean creative children's book", this paper was went throu gh. By searchinf.i for creative com ponent.s of picture-book planning such as theme, story, illustration, and edit design through the foreign picture-book "What 1 want. to know from the little mole is who made it on top of his head"-and domestic creative picture/book 'Puppy's shit", this study tried to tell a couple of things like followings publication of Korean creative picture book in t.he world. professional and more artistic inner fabric and originality(the relatio nship be tween stort and illu,tration), improvement of illustration through new formative language with well expressed con ten t, planning improvem ent of Korean creative pictive picture book including literary, artistic and educative component and finally examples of planning, artict and educative component and finally example, of planning the good book with a story and illu,;tration which can in the long run improve the value of life for the children.h can in the long run improve the value of life for the children.

• Journal of Distribution Science
• /
• v.10 no.5
• /
• pp.7-17
• /
• 2012

The recent announcement of the National Research Foundation of Korea (NRF) to cease journal accreditation operations as of the end of the year 2014 can easily influence the future of many research journals in Korea. Although this plan has not yet been formalized or structured, its facilitation would be the major turning point for the current Korean research and scholarly journals and publications. In addition, the NRF's plan to select and fund top 20 or more research journals over the five year period beginning 2015 suggests that the competition will most likely increase among Korean journals. Each journal would need to develop its unique strategy to improve and strengthen its competitiveness to become or maintain its position as a major research journal in Korea. The association of Korean Distribution of Science (KODISA) and its research journal, Journal of Distribution Science (JDS), has been continuously improving its reputation as a reputable journal in the distribution and related fields since its establishment in 1999. Due to demand, JDS has had to undergo several changes in its publication cycle first from semiannual publication to quarterly, then finally to monthly publications in 2012, and has become one of the major social science journals in Korea. Furthermore, with the redesigning of its webpage with English language in July of 2011, KODISA has made the published journals freely accessible and available to both domestic and foreign researchers, scholars, practitioners, and learners. These changes have resulted in the rapid increase in the bounce rate and the number of journal submissions by foreign scholars, with four research articles having been submitted by foreign scholars just in March of 2012 alone. However, although the changes and outcomes have resulted in a reasonable success so far, the achievement may only become a short-term success without continuously developing, improving, and implementing both effective and efficient strategies through critical, thorough, and frequent examinations and evaluations of both KODISA and JDS. As such, the purpose of this research is to carefully examine both KODISA and JDS to identify problematic factors and to develop appropriate strategies to change or modify those problems for further strengthening and improving their reputation and status. The paper examines and analyzes the past, present, and future of KODISA and JDS and their managerial, operational, and systematic procedures and operations. The narrow scope of research and inefficiencies in promoting the association and the journal and the improvement of impact factors are identified as the notable problems that could hinder JDS from being included in SCOPUS or SSCI in the near future. This type of examination and exploration has not been previously conducted, so the major limitation of this paper can be identified as not meticulously elaborating on the problems nor proving detailed recommendations based on the existing researches. This article asserted that solving the problem of the narrow scope of research would lead to facilitation of resolving other inefficient problems. Inclusion of international academic disciplines to the distribution and their related fields would be the viable initiation of expanding the research area, and this strategy could promote the journal as well as improve its impact factors. The narrow scope of research seems to be a good research topic and merit further exploration as an individual research project, because this kind of research could yield the creation of new understandings or theories.

• Journal of Korean Home Economics Education Association
• /
• v.31 no.3
• /
• pp.155-177
• /
• 2019

The study aims to develop a teaching-learning plan that can solve the problem of the clothing and textiles area faced by the teenager as course of critical science perspective improving the empowerment. As a research method, it was conceptualized by applying the Laster(1986)'s curriculum development process. And it was applied to the conceptual framework of practical reasoning presented in: "Family, Food and Society A Teacher's guide" (Staaland & Storm, 1996). The results of this study are summarized as follows. First, based on the results of reviewing literature related to the clothing and textiles area, ongoing concerns related to the clothing and textiles is "Should we do with regard to clothing and textiles for families in the community? The valued ends is defined as a complex position with a high degree of freedom and a high responsibility, and the goal of learning is interdependence, emotional maturity, intellectual development, and communication ability. For the contents of education and activity structure, practical reasoning process was used as conceptual framework of education contents, and included sub-concerns, broad concepts, sub-concepts and intellectual and social skills. Second, based on the practical reasoning, we developed a teaching and learning plan in the clothing and textiles. As a result, a total of 12 plan of 5 modules were developed. And were developed a total of 31 tutorials, reading materials, picture materials, group activities, and video materials. The results of this study can be applied to teachers who want to try out practical inference process in class or teachers who have difficulty in practicing reasoning process in the field.

• Progress in Medical Physics
• /
• v.24 no.4
• /
• pp.271-277
• /
• 2013

In prostate IMRT planning, the planning target volume (PTV), extended from a clinical target volume (CTV), often contains an overlap air volume from the rectum, which poses a problem inoptimization and prescription. This study was aimed to establish a planning method for such a case. There can be three options in which volume should be considered the target during optimization process; PTV including the air volume of air density ('airOpt'), PTV including the air volume of density value one, mimicking the tissue material ('density1Opt'), and PTV excluding the air volume ('noAirOpt'). Using 10 MV photon beams, seven field IMRT plans for each target were created with the same parameter condition. For these three cases, DVHs for the PTV, bladder and the rectum were compared. Also, the dose coverage for the CTV and the shifted CTV were evaluated in which the shifted CTV was a copied and translated virtual CTV toward the rectum inside the PTV, thus occupying the initial position of the overlap air volume, simulating the worst condition for the dose coverage in the target. Among the three options, only density1Opt plan gave clinically acceptable result in terms of target coverage and maximum dose. The airOpt plan gave exceedingly higher dose and excessive dose coverage for the target volume whereas noAirOpt plan gave underdose for the shifted CTV. Therefore, for prostate IMRT plan, having an air region in the PTV, density modification of the included air to the value of one, is suggested, prior to optimization and prescription for the PTV. This idea can be equally applied to any cases including the head and neck cancer with the PTV having the overlapped air region. Further study is being under process.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.2
• /
• pp.191-198
• /
• 2009

Statement of problem: Ceramics have been important materials for the restoration of teeth. The demands of patients for tooth-colored restorations and the availability of various dental ceramics has driven the increased use of new types of dental ceramic materials. Improved physical properties of theses materials have expanded its use even in posterior crowns and fixed partial dentures. However, ceramic still has limitation such as low loading capability. This is critical for long-span bridge, because bridge is more subject to tensile force. Purpose: The wire reinforced ceramic was designed to increase the fracture resistance of ceramic restoration. The purpose of this study was to evaluate the fracture resistance of wire reinforced ceramic. Material and methods: Heat pressed ceramic(ingot No.200 : IPS Empress 2, Ivoclar Vivadent, Liechtenstein) and Ni-Cr wire(Alfa Aesar, Johnson Matthey Company, USA) of 0.41 mm diameter were used in this study. Five groups of twelve uniform sized ceramic specimens(width 4 mm, thickness 2 mm, length 15 mm) were fabricated. Each group had different wire arrangement. Wireless ceramic was used as control group. The experimental groups were divided according to wire number and position. One, two and three strands of wires were positioned on the longitudinal axis of specimen. In another experimental group, three strands of wires positioned on the longitudinal axis and five strands of wires positioned on the transverse axis. Three-point bending test was done with universal testing machine(Z020, Zwick, Germany) to compare the flexural modulus, flexural strength, strain at fracture and fracture toughness of each group. Fractured ceramic specimens were cross-sectioned with caborundum disc and grinded with sandpaper to observe interface between ceramic and Ni-Cr wire. The interface between ceramic and Ni-Cr wire was analyzed with scanning electron microscope(JSM-6360, JEOL, Japan) under platinum coating. Results: The results obtained were as follows: 1. The average and standard deviation in flexural modulus, flexural strength and fracture toughness showed no statistical differences between control and experimental groups. However, strain was significantly increased in wire inserted ceramics(P<.001). 2. Control group showed wedge fracture aspects across specimen, while experimental groups showed cracks across specimen. 3. Scanning electron microscopic image of cross-sectioned and longitudinally-sectioned specimens showed no gap at the interface between ceramic and Ni-Cr wire. Conclusion: The results of this study showed that wire inserted ceramics have a high strain characteristic. However, wire inserted ceramics was not enough to use at posterior area of mouth in relation to flexural modulus and flexural strength. Therefore, we need further studies.

• Journal of Preventive Medicine and Public Health
• /
• v.9 no.1
• /
• pp.11-24
• /
• 1976

This study was a part of large scale of a prospective study on attitudes of professional students in medicine, nursing and teaching toward population related issues in Korea. The study was first conducted in May 1974 and then in May 1975 for the 1974 class cohot using a questionaire consisted of attitude scales and other items developed by Lee. The purpose of stuay was twohold, namely, to determine the difference in students among specializations on one hand and between the first and second years in the 1974 class cohot regarding tile subject matter. A one-way analysis of variance was used for attitude scale, and absolute and relative frequency were computed for the analysis of non-attitude scale items by employing Fishers' Ratio and Duncan's multiple range test at 5% level and chi square test at 5% level as significance tests. The hypothesis 'students in health profession are more likely to have positive attitudes toward population related issues progressively as class year advances than students in teaching profession' was tested and the following results were obtained: 1) Nursing students were more likely to display favarable attitudes toward family planning than medical or teaching students although the class cohot showed slightly negative improvement in the second year. Medical and teaching students apperaed to have slightly improved attitudes in the second year. 2) Respondents in general perceived national family planning program as a means of population control and this tendency was more true among nursing students as the class year advances than two other professional groups of students. Students in teaching profession appeared to perceive it more as a means to improve individual family welfare while health students were likely to see as to improve maternal and child health. This tendency was progressively improved as the class year advanced. 3) The majority of students regardless of their respective specializations believed that family planning program should be directed toward the improvement of individual family welfare. No progressive changes in the class cohot were observed. 4) About the plan to use contraceptives in future, no singnificant differences were observes among different specializations nor in different class years. However, the majority was confirmed to have a plan to use contracepives in future. An increasing proportion of the undecided category was observed, as class year advanced among health students. 5) Students in health profession were found to be more favorable about 'more leisure opportunities' as motive for limiting number of children whereas education students indicated the reasons as 'facilitate ambitions' and 'economic base' The progressive changes toward positive direction in both groups were observed as the class years advanced. 6) Attitudes toward induced abortions of the health students were observed to be positively related to class years while an inverse relationship was found in teaching students who showed much less favor in the subject matter than health students. This phenomenon may be due to the different exposure to learning environments unique to respective specializations. 7) Health students were found to have more favorable attitudes toward population education in general than the teaching students. The teaching students appeared to have changed more to the negative direction when they became the second year while no such development was observed in health students. The teaching students seemed to hold a very conservative position with regard to sex education in schools. 8) About the equality of sexes, the nursing group was found to be most favorable while the reverse was true in the teaching group. A change in the negative direction as the class year advanced was found in the teaching group. 9) About questions related to fertility values-the 10 percent of respondents regardless of specialization indicated that they would maintain their single status in future, however no change was observed in the second year. The desired number of children was found to be two by the majority of students in nursing, medicine and teaching in order of high proportion. No changes in a different class year were observed. The childless marriage was seen by nursing students as a problem more than other students, but a slight change in positive direction was found when the nursing students became the second year. In summing, as data supported in the above, students in health profession demonstrated more favorable attitudes toward population related issues than the teaching students and this tendency became more apparent in the second year. It was noticed that health students were more conscious about the health aspect of population and family planning program while the teaching students gave more attention to the socioeconomic aspect. The sex variable seemed to have operated in the item related to the equality of sexes. In conclusion, as data presented in the above, the hypothesis of this study was accepted except in the few items. It should be noted that the limitation of this study is the short duration of the observation in measuring the possible attitude changes. It should include curriculum analysis for the respective specializations in order to indentify the area of curriculum impact on students in future study.

• Korea Journal of Hospital Management
• /
• v.7 no.4
• /
• pp.24-56
• /
• 2002

The purpose of this study was to analyze the characteristics of socio-demographic, organizational culture, organizational conflict and organizational commitment, and to examine the interrelation of influential factors in the organizational commitment. The data for this study were collected through a self-administrated survey with a structured questionnaire to 1,027 subjects from several medical doctor staff members, nursing staff members, administration staff members, pharmacist, and technical expert of eleven hospitals. The data were collected by self-reporting questionnaire from July 29 to September 7, 2002. In this analysis frequency test, t-test, ANOVA, multiple regression were used. The main results of this research is as following; 1. According to socio-demographic characteristics the respondents' level of the organizational commitment was higher in a administration staff members than others, for males than females, and for employees aged more than forty, as working for longer time, and as higher level of the working position. 2. According to the organizational culture characteristics the progressive culture, affiliative culture, and task-focused culture among many types of organizational culture were moderately and positively correlated with the level of the organizational commitment while the hierarchical culture was negatively correlated. 3. According to the organizational conflict characteristics as the respondents who got less conflict experience in the organization, their level of the organizational commitment was higher. And, technical conflict experiences were expressed greater than hierarchical conflict experiences. 4. According to the job satisfaction characteristics as his or her satisfaction that is about the promotion, working itself, salary, and fellowship in the organizational was higher, the level of the organizational commitment was higher. The most important factor of the satisfactions was the fellowship among the respondents while the level of job satisfaction for the promotion and salary was average. 5. Overall, according to the result of Multiple Regression as older age and longer working hours, the level of the organizational commitment was higher and as a higher level of the satisfaction for the promotion, working itself, salary, and fellowship in the organization, it caused more effective factors for the organizational commitment. 6. According to the result of Multiple Regression for the doctor staff members in special hospitals rather than general hospitals the hierarchical culture and task focused culture was positively correlated with the satisfaction of working itself while hierarchical conflict factors in the organizational conflict characteristics was negatively correlated with the organizational commitment. For the nursing staff members the affiliative culture and the job satisfaction for the promotion, working itself, salary, and fellowship were positively correlated with the organizational commitment. For the administration staff members as the job satisfaction for the fellowship was positively correlated with the organizational commitment. For medical and pharmacy staff members as more working experience, correlation with the organizational commitment was positive. Besides, as he or she has a high perception of the affiliative culture, it caused statistically more effective factors for the organizational commitment. For the skill and technicians, male worker expressed greater organizational commitment in the organization than female worker. And also older age along with higher education also showed higher organizational commitment. Moreover, the job satisfaction for the fellowship was positively correlated with the organizational commitment. This study identified the major effective factors of the organizational commitment and analyzed the differences among the job category. In that respect, it is significant for the study to be able to provide a reference for managing hospital of industrial accident and organizational development. However, this study has a problem, which is not to identify a valuable model for examining the relationship between organizational factors such as organizational culture, conflict, satisfaction, and commitment. Therefore, further study is needed and strengthened in the field of organizational commitment for hospital for industrial accident.

• Sleep Medicine and Psychophysiology
• /
• v.5 no.1
• /
• pp.45-53
• /
• 1998

Objectives : The change of sleep patterns commonly occurs in association with the pregnancy. This study was to investigate sleep habits during the course of normal pregnancy. Methods : Sleep habits questionnaire was administered to healthy women in their first trimester(TR1) of pregnancy and then the same questionnaire was repeatedly administered during their second(TR2) and third(TR3) trimesters. The following aspects were assessed : patterns of night sleep, daytime status, sleep posture, reasons for sleep alteration, and the experience of any particular parasomnias, as well as sleep problem-related treatment or medication. Data analysis was based on 26 women who maintaind good health throughout their pregnancy and completed the questionnaire three times. Results : In comparisons between each trimester and non-pregnant state, total night sleep time, daytime tiredness, and sleepiness were significantly increased in all trimesters. Sleep latency was significantly decreased in TR1 and TR2, but not in TR3. In addition, refreshed feeling on waking the following day was significantly decreased and the number of awakenings during night sleep was significantly increased in TR3, but not in TR1 and TR2. In comparisons between trimesters, there was a significant increase in sleep latency, daytime sleepiness and the number of awakenings during night sleep and a significant decrease in refreshed feeling on waking the following day in TR3 compared to TR1 and TR2. Over the course of pregnancy, the rate of lateral position during sleep was gradually increased and all the pregnant women took the lateral sleeping posture in TR3. The major reasons for sleep pattern alteration were nausea, vomiting and heartburn in TR1, urinary frequency, fetal movement and ache in hips in TR2, and urinary frequency, fetal movement, cramp in legs and backache in TR3. Conclusion : These findings are expected to be useful for educating pregnant women about sleep hygiene. In future studies, the underlying factors and mechanisms regarding sleep patterns during pregnancy will need to be clarified.

• KIPS Transactions on Software and Data Engineering
• /
• v.4 no.11
• /
• pp.509-520
• /
• 2015

College Scholastic Ability Test(CSAT) is a primary test to evaluate the study achievement of high-school students and used by most universities for admission decision in South Korea. Because its level of difficulty is a significant issue to both students and universities, the government makes a huge effort to have a consistent difficulty level every year. However, the actual levels of difficulty have significantly fluctuated, which causes many problems with university admission. In this paper, we build two types of data-driven prediction models to predict correct answer rate and to identify significant factors for CSAT English test through accumulated test data of CSAT, unlike traditional methods depending on experts' judgments. Initially, we derive candidate question-specific factors that can influence the correct answer rate, such as the position, EBS-relation, readability, from the annual CSAT practices and CSAT for 10 years. In addition, we drive context-specific factors by employing topic modeling which identify the underlying topics over the text. Then, the correct answer rate is predicted by multiple linear regression and level of difficulty is predicted by classification tree. The experimental results show that 90% of accuracy can be achieved by the level of difficulty (difficult/easy) classification model, whereas the error rate for correct answer rate is below 16%. Points and problem category are found to be critical to predict the correct answer rate. In addition, the correct answer rate is also influenced by some of the topics discovered by topic modeling. Based on our study, it will be possible to predict the range of expected correct answer rate for both question-level and entire test-level, which will help CSAT examiners to control the level of difficulties.