• Journal of the Korean Society of Clothing and Textiles
• /
• v.40 no.4
• /
• pp.701-715
• /
• 2016

This research compared 3 types of jacket pattern design methods for men's wear (age range 25-35) in textbooks. We are to develop research pattern with problem solving based on an analysis of three jacket patterns. The comparative analysis revealed that loose-silhouette slopers A and B scored high in functional evaluation and low in appearance evaluation. However, the tight-silhouette slim-line sloper C received high points in appearance evaluation, but low scores in functional evaluation. All three slopers were evaluated low in the back appearance. The design characteristics of the development jacket sloper were: front width, ($1/10chest{\times}2$)+0.8cm; side width, 1/10 chest+5.5cm; back width, ($1/10chest{\times}2$)+1.5cm; armscye depth, 1/8 chest+11cm; waist back length, 1/2 jacket length+5cm; and hip length, 1/2 (jacket length-waist length)+1cm. The proportions against jacket length were applied to waist length, hip length, and the position of chest/waist pockets. In addition, the back part with low appearance estimation was adjusted as comfortable with the back curve line. Appearance evaluation and 3D clothes modeling system (CLO) showed an overall improvement in the developed jacket sloper when compared to the original jacket slopers.

• Journal of Gifted/Talented Education
• /
• v.21 no.2
• /
• pp.309-335
• /
• 2011

Writings of gifted students were classified by the writing analysis protocol built on the scientific inquiry process and writings of scientific journals. These writings were classified 7 types based on the existence of tentative explanations and types of conclusion. In addition the writings were classified by linear form, double linear form, supporting-conclusion form based on the number and position of writings. The characteristics of writings show that, first, the tentative explanation is located at the beginning and the drawing conclusion at the end of articles. Secondly, students prefer the linear form writing to explain their logics. Finally, supporting-conclusion writings are shown when answers of question is written only in the drawing conclusion without estimation.

• Korean Journal of Childcare and Education
• /
• v.9 no.5
• /
• pp.37-78
• /
• 2013

This study aimed to analyze the operating expenses and to estimate the standard child-care service cost in family childcare centers. The subjects were 442 family childcare centers in Korea and the data were analyzed with descriptive statistics by using SPSS 18.0 programs. The main results were as follows. Firstly, as the result of operating expenses analyses of family childcare centers, monthly average staff wages were 5,120,000 won and average general operating costs per month were 5,114,170 won. Therefore, monthly average operating costs of family childcare centers were totally 10,234,170 won. Secondly, the four standard child care service costs were calculated on the basis of the directors holding an additional teacher's position concurrently, whether the additional cooking staff were employed or not, and the type of lunch/snack materials.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.1
• /
• pp.47-60
• /
• 2018

In this paper, we proposed a method for eliminating aiming error of unguided anti-tank rocket using improved target tracking. Since predicted fire is necessary to hit moving targets with unguided rockets, a method was proposed to estimate the position and velocity of target using fire control system. However, such a method has a problem that the hit rate may be lowered due to the aiming error of the shooter. In order to solve this problem, we used an image-based target tracking method to correct error caused by the shooter. We also proposed a robust tracking method based on TLD(Tracking Learning Detection) considering characteristics of the FCS(Fire Control System) devices. To verify the performance of our proposed algorithm, we measured the target velocity using GPS and compared it with our estimation. It is proved that our method is robust to shooter's aiming error.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.3
• /
• pp.551-560
• /
• 2011

Recently, There has been increasing concern about WLAN-based indoor positioning system. Most of the existing WLAN-based positioning systems use a fingerprinting method as a main approach. In the fingerprinting approach, the accuracy of the location of a mobile objects is proportional to the number of reference points. However, depending on the increasing number of reference points in the training phase, it requires more time and effort to create fingerprint database. To solve these problems, we propose the new indoor positioning algorithm that calculate the distance between a mobile objects and an AP using the information of surrounding environment WLAN based APs and applied the particle filter to the proposed algorithm in order to improve the accuracy of the estimated location in this paper. To implement this algorithm, at first environmental information database such as wall, iron door, glass door, partition etc. existing in the periphery of the AP should be established. The positioning use attenuation model and path loss model. Our experimental results with proposed algorithm are verified that the positioning accuracy was low but solved the problems with fingerprinting, compared with other positioning algorithms.

• The Journal of the Acoustical Society of Korea
• /
• v.36 no.3
• /
• pp.218-227
• /
• 2017

In this paper, an algorithm to calculate both bearing and distance error for target detection and localization is proposed using the Cramer Rao lower bound to estimate the minium variance of their error in DOA (Direction Of Arrival) estimation. The performance of arrays in detection and localization depends on the accuracy of DOA, which is affected by a variation of SNR (Signal to Noise Ratio). The SNR is determined by sonar parameters such as a SL (Source Level), TL (Transmission Loss), NL (Noise Level), array shape and beam steering angle. For verification of the suggested method, a Monte Carlo simulation was performed to probabilistically calculate the bearing and distance error according to the SNR which varies with the relative position of the target in space and noise level.

• The Journal of Churna Manual Medicine for Spine and Nerves
• /
• v.9 no.1
• /
• pp.1-14
• /
• 2014

Objective : The purpose of this study is to offer a new approach to diagnostic X-ray in perspective of Chuna manual medicine for clinical application. Methods : Characteristics of each malposition in X-ray were analyzed comprehensively, based on the listing system. By verifying these results, find out the methods of X-ray diagnosis according to the each malposition. Results : 1. Vertebral malposition can be explained by alignment and relative position of vertebral body in the X-ray. To obtain more accurate estimation of subluxation, features of other structures should be considered, such as spinous process, intervertebral foramen and disc space. 2. Pelvic malposition can be determined by relative location of anterior superior iliac spine (ASIS) and posterior superior iliac spine (PSIS) in the X-ray. Also other pelvic parameters should be utilized to make a diagnosis of sacral malposition. Conclusions : Diagnostic X-ray should be applied to many clinicians for reasonable Chuna manual medicine application. And further studies are needed to use the diagnostic X-ray in the perspective of Chuna manual medicine.

• Journal of the Ergonomics Society of Korea
• /
• v.30 no.1
• /
• pp.229-235
• /
• 2011

Objective: Making a new ergonomic interface system based on camera vision system, which helps the handicapped in home environment. Background: Enabling the handicapped to manipulate the consumer electronics by the proposed interface system. Method: A wearable device for capturing the eye image using a near-infrared(NIR) camera and illuminators is proposed for tracking eye gaze position(Heo et al., 2011). A frontal viewing camera is attached to the wearable device, which can recognize the consumer electronics to be controlled(Heo et al., 2011). And the amount of user's eye fatigue can be measured based on eye blink rate, and in case that the user's fatigue exceeds in the predetermined level, the proposed system can automatically change the mode of gaze based interface into that of manual selection. Results: The experimental results showed that the gaze estimation error of the proposed method was 1.98 degrees with the successful recognition of the object by the frontal viewing camera(Heo et al., 2011). Conclusion: We made a new ergonomic interface system based on gaze tracking and object recognition Application: The proposed system can be used for helping the handicapped in home environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.9
• /
• pp.614-619
• /
• 2014

In WSN (Wireless Sensor Networks) based surveillance system, it needs to know the occurrence of events or objects and their locations, because the data have no meaning without location information. Using traditional 2D localization mechanisms provide good accuracy where altitude is fixed. But the mapping the position estimated by 2D localization to the real world can cause an error. Even though 3D localization mechanisms provide better accuracy than 2D localization, they need four reference nodes at least and high processing overhead. In our surveillance system, it is needed to estimate the height of the detected object in order to determine if the object is human. In this paper, we propose a height estimation mechanism which does not require many reference nodes and high complexity. Finally, we verify the performance of our proposed mechanism through various experiments.

• Journal of Navigation and Port Research
• /
• v.37 no.4
• /
• pp.337-343
• /
• 2013

To ensure the safety for vessels anchored in stormy weather, duty officer and VTS operator have to frequently check whether their anchors are dragging. To judge dragging of the anchored vessel, it is important for VTS operator to recognize the turning circle and its center of the anchored vessel. The judgement for the anchored vessel dragging can be made by using Radar and AIS. If it is available, CCTV or eye-sighting can be used to know the center of turing circle. However, the VTS system collects individual ship's dynamic information from AIS and ARPA radar and monitors of the anchored vessels, it is difficult for VTS operator not only to get the detailed status information of the vessels, but also to know the center of turning circle. In this study, we propose an efficient algorithm to estimate the center of turning circle of anchored vessel by using the ship's heading and position data, which were from AIS. To verify the effectiveness of the proposed algorithm, the experimental study was made for the anchored vessel under real environments.