• Journal of Korean Port Research
• /
• v.14 no.3
• /
• pp.303-312
• /
• 2000

In this paper, we describe an image processing algorithm which is able to recognize the road lane. This algorithm performs to recognize the interrelation between AGV and the other vehicle. We experimented on AGV driving test with color CCD camera which is setup on the top of vehicle and acquires the digital signal. This paper is composed of two parts. One is image preprocessing part to measure the condition of the condition of the lane and vehicle. This finds the information of lines using RGB ratio cutting algorithm, the edge detection and Hough transform. The other obtains the situation of other vehicles using the image processing and viewport. At first, 2 dimension image information derived from vision sensor is interpreted to the 3 dimension information by the angle and position of the CCD camera. Through these processes, if vehicle knows the driving conditions which are lane angle, distance error and real position of other vehicles, we should calculate the reference steering angle.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1440-1443
• /
• 1997

The optimal residual generator based on parity relation approach for the fault detection and isolation of a arge diesel engine actuator position servo system is presented. The closed-loop residual generator is designed to have robustness against modeling errors and noise. Main purpose of the fault detection and isolation system in the process is to detect and isolate two important faults, i.e., actuatro fault and fault of speed sensor, that, if not detected and compensated, degrade the overall control system performance. Simulation results are give to show the practical applicability of the fault detecrtion and isloation scherme.

• The Journal of Korea Robotics Society
• /
• v.12 no.3
• /
• pp.258-262
• /
• 2017

In this paper, we propose a new collision detection algorithm for human-robot collaboration. We use an IMU sensor located at the tip of the manipulator and the kinematic behavior of the manipulator to detect the unexpected collision between the robotic manipulator and environment. Unlike other method, the developed algorithm uses only the kinematic relationship between the manipulator joint and the end effector. Therefore, the collision estimation signal is not affected by the error of the dynamics model. The proposed collision detection algorithm detects the collision by comparing the estimated acceleration of the end effector derived from the position, velocity and acceleration trajectories of the robot joints with the actual acceleration measured by the sensor. In simulation, we compare the performance of our method with the conventional Residual Observer (ROB). Our method is less sensitive to the load variation because of the independency on the dynamic modeling of the manipulator.

• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.409-411
• /
• 1994

A rotating experimental unit for the train control is made and the train detection method by the inductive radio line is adopted. In this unit, the inductive radio line is spreaded on the rotor plate and the receiving antennas are equipped on the stator side. The detection circuits for train position and train speed are composed and an application of the train control by PID controller is presented.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.1224-1227
• /
• 2002

In this paper, we propose a composition method of the template image whose detection performance does not have incorrect detection and improves also on the tough photography conditions of the outdoors, rainy weather and night. This research was done to measure a relative position between a spreader and a target container with image processing to realize full-automatic quayside gantry cranes. By the proposal method, we confirmed that the template image for object detection has a contour image more effective than a gray image.

• Journal of Sensor Science and Technology
• /
• v.23 no.3
• /
• pp.149-157
• /
• 2014

This paper considers the ability of counting and positioning multi-targets by using a mobile UWB radar device. After a background subtraction process, distinguishing between clutters and human body signals, the position of targets will be computed using weighted Gaussian mixture methods. While computer vision offers many advantages, it has limited performance in poor visibility conditions (e.g., at night, haze, fog or smoke). UWB radar can provide a complementary technology for detecting and tracking humans, particularly in poor visibility or through-wall conditions. As we know, for 2D measurement, one method is the use of at least two receiver antennas. Another method is the use of one mobile radar receiver. This paper tried to investigate the position detection of the stationary human body using the movement of one UWB radar module.

• Proceedings of the KIEE Conference
• /
• 1997.07a
• /
• pp.346-348
• /
• 1997

This paper presents microprocessor-based real-time speed and position detection by inductive radio loop in new transportation system, such as magnetically levitated train system, rubber tyred train, and linear-motor car. The constant elapsed time method is used in this study for high accurate detection over a wide speed range. And for reliability and safety of the system, it is duplicated and data-bus level comparison is performed by fail-safe comparator.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.786-791
• /
• 2004

This study proposed the analysis of mass position detection and modified stiffness due to the change of the mass and stiffness of structure by using the original and modified dynamic characteristics. The method is applied to examples of a cantilever and 3 degree of freedom by modifying the mass. The predicted detection of mass positions and magnitudes are in good agreement with these from the structural reanalysis using the modified mass.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.306-308
• /
• 2005

The vehicle detection method using pulse radar has the advantage of maintenance in comparison with loop detection method. We have the information about the vehicle being and position by dividing the signals into sectors in accordance with SSC method, and by applying the discriminant function based on stochastical data. We also reduce the signal processing time.

• Proceedings of the KIEE Conference
• /
• 2006.04a
• /
• pp.117-119
• /
• 2006

In this work, we suggest another method to localize DFT in spatial domain. This enables DFT algorithm to be used for local pattern matching. Once calculated, it costs same load to calculate localized DFT regardless of the size or the position of local region In spatial domain. We applied this method to face detection problem and got the results which prove the utility of our method.