• Economic and Environmental Geology
• /
• v.41 no.6
• /
• pp.747-761
• /
• 2008

In order to experiment the acoustic remote classification of seabed sediment, we achieved ground-truth data(i.e. video and grab samples, etc.) and developed post-processing for automatic classification procedure on the basis of 300 kHz MultiBeam Echo Sounder(MBES) backscattering data, which was acquired using KONGBERG Simrad EM3000 at Sock-Cho Port, East Sea of South Korea. Sonar signal and its classification performance were identified with geo-referenced video imagery with the aid of GIS (Geographic Information System). The depth range of research site was from 5 m to 22.7 m, and the backscattering amplitude showed from -36dB to -15dB. The mean grain sizes of sediment from equi-distanced sampling site(50 m interval) varied from 2.86$(\phi)$ to 0.88(\phi). To acquire the main feature for the seabed classification from backscattering amplitude of MBES, we evaluated the correlation factors between the backscattering amplitude and properties of sediment samples. The performance of seabed remote classification proposed was evaluated with comparing the correlation of human expert segmentation to automatic algorithm results. The cross-model perception error ratio on automatic classification algorithm shows 8.95% at rocky bottoms, and 2.06% at the area representing low mean grain size.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.18 no.2
• /
• pp.124-136
• /
• 2006

The change pattern of the sediment grain size distribution information (median grain size(D50)) due to some gridding method and sampling density is analyzed with reference to the grid information estimated by the 90 sediment samples which was collected in the coastal water off the Baengnyeongdo Island, in June 2004. The standard deviation of absolute deviation (AD) estimated the selected gridding method shows 8.0 ${\mu}m$ at June, 2004 and 10 ${\mu}m$ November, 2004. The estimated statistical information of absolute deviation in comparison with the grid information of reference and changed sampling density shows that the AD mean error trends increase as the number of samples decrease. The AD mean error is below 10% in the case of the information estimation using 50-sample with reference to the 90-sample information. In this case, the sampling density is suggested as about 9 sediment samples per $km^2$, at coastal zone in Yoggipo port in the condition of the study area is 5.9 $km^2$.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.33 no.5
• /
• pp.319-329
• /
• 2020

Among the bridges used in Korea, those that are more than 30 years old account for approximately 11% of the total bridges. Therefore, developing a seismic performance-evaluation method is necessary by considering the bridge age. Three composite steel-concrete box girder bridges with port, elastic-rubber, and lead-rubber bearings were selected, and a structural analysis model was developed using the OpenSEESs program. In this study, pier aging was reflected by the reduction in the area of the longitudinal and transverse rebars. Four conditions of 5%, 10%, 25%, and 50% in the degree of pier aging were used. As input earthquakes, 40 near-fault and far-field earthquakes were used, and the maximum displacement and maximum shear-force responses of the piers were obtained and compared. The result shows that as the aging degree increases, the pier strength decreases. Therefore, the pier displacement response increases. To analyze the effects of displacement response and shear resistance, displacement ratio D_ratio and shear-force ratio F_ratio were evaluated. The older the sample bridge is, the greater is the tendency of D_ratio to increase and the smaller is the tendency of F_ratio to decrease.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.133-144
• /
• 2009

Incheon Bridge, 18.4 km long sea-crossing bridge, will be opened to the traffic in October 2009 and this will be the new landmark of the gearing up north-east Asia as well as the largest & longest bridge of Korea. Incheon Bridge is the integrated set of several special featured bridges including a magnificent cable-stayed girder bridge which has a main span of 800 m width to cross the navigation channel in and out of the Port of Incheon. Incheon Bridge is making an epoch of long-span bridge designs thanks to the fully application of the AASHTO LRFD (load & resistance factor design) to both the superstructures and the substructures. A state-of-the-art of the geotechnologies which were applied to the Incheon Bridge construction project is introduced. The most Large-diameter drilled shafts were penetrated into the bedrock to support the colossal superstructures. The bearing capacity and deformational characteristics of the foundations were verified through the world's largest static pile load test. 8 full-scale pilot piles were tested in both offshore site and onshore area prior to the commencement of constructions. Compressible load beyond 30,000 tonf pressed a single 3 m diameter foundation pile by means of bi-directional loading method including the Osterberg cell techniques. Detailed site investigation to characterize the subsurface properties had been carried out. Geotextile tubes, tied sheet pile walls, and trestles were utilized to overcome the very large tidal difference between ebb and flow at the foreshore site. 44 circular-cell type dolphins surround the piers near the navigation channel to protect the bridge against the collision with aberrant vessels. Each dolphin structure consists of the flat sheet piled wall and infilled aggregates to absorb the collision impact. Geo-centrifugal tests were performed to evaluate the behavior of the dolphin in the seabed and to verify the numerical model for the design. Rip-rap embankments on the seabed are expected to prevent the scouring of the foundation. Prefabricated vertical drains, sand compaction piles, deep cement mixings, horizontal natural-fiber drains, and other subsidiary methods were used to improve the soft ground for the site of abutments, toll plazas, and access roads. Light-weight backfill using EPS blocks helps to reduce the earth pressure behind the abutment on the soft ground. Some kinds of reinforced earth like as MSE using geosynthetics were utilized for the ring wall of the abutment. Soil steel bridges made of corrugated steel plates and engineered backfills were constructed for the open-cut tunnel and the culvert. Diverse experiences of advanced designs and constructions from the Incheon Bridge project have been propagated by relevant engineers and it is strongly expected that significant achievements in geotechnical engineering through this project will contribute to the national development of the longspan bridge technologies remarkably.

• Journal of Korean Academy of Nursing
• /
• v.25 no.3
• /
• pp.472-484
• /
• 1995

The purpose of this study was to develop a home health care model in the public health system and to test the effectiveness of the model. Seven com-munity health practitioners in Yon- Cheon county. Kyunggi province, carried out home health care service for this research. The subjects of the home health care were a total of 111 community residents with chronic health problems and risk-prone infants and children; 29 persons with hypertension, 18 persons with diabetes, 12 persons with neurologic problems, 12 elderly, and 40 infants and children. During the period of study, from December, 1993 to March, 1995, a demonstrative home health care model was developed in the Yon-Cheon County community health centers with the cooperation of the Yon-Cheon Medical Center and Yon-Cheon Public Health Center for the first six months. A home care practice manual and recording system for home visits were also co-developed by the researchers and community health practitioners. Four workshops and monthly conferences were held for this purpose. Actual home care practice took place for two months, and on-going evaluation and replanning accompanied this process. The result of the evaluation of home care service were as follows. 1) For persons with hypertension, diabetes, neurologic problems, there was significant improvement in knowledge of disease and care, but no significant difference was seen in health behavior or symptoms after home care service. 2) No significant difference was seen in level of self esteem or depression after reminiscence therapy among 12 elderly subjects. 3) There were significant differences in satis-faction toward child rearing and parental sup-port, but no significant difference In education needs for parental role after home care service among parents of infants and children. 4) There was significant improvement in the quality of life among the subjects after the home care service. 5) Subjects responded that they were highly satisfied with the home care service given by the community health practitioners. Although, the actual implementation period was very short, and not all of the evaluation outcomes showed significant improvement, the home health care model of community health practitioners was, in general, positively evaluated. Through this re-search, the possibility of community health practitioners working as active home care personnel in the public health care system is supported. Further research with an expanded area and subjects for a longer period is recommended. Cost effectiveness research is also needed.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.2
• /
• pp.194-199
• /
• 2017

When sea tide and wave velocity change, the behavior of silt protectors underwater changes, and a hydraulic force exceeding the anchor wave force is applied. In this study, the movement mechanism of a silt protector has been analyzed using the mass-spring method. The initial position of the silt protector was in the Jindo area near Gwangpo Port (742-1, Gyupori, Chongdo-myeon, Jindo-gun, Jeonnam, Korea). The tension required to exceed the holding power of the anchor was 0.05 m/s at 318 sec., 0.15 m/s at 77 sec., 0.25 m/s at 43 sec., and 0.3 m/s at 37 sec.. As the anchor started to move from the sea floor and the tide speed increased to 0.01 m/s, anchor movement start time shortened by an average of 11.2 sec.. Compared with when tide was the only affecting factor, the silt protector and anchor were found to have moved 19.7 % at 0.1 m/s, 7.6 % at 0.15 m/s, 5.8 % at 0.2 m/s, 4.3 % at 0.25 m/s and 2.8 % at 0.3 m/s, showing an increase. When wave effect was added to the tide, anchor movement started when the flow rate was slow 7.6 % of the time. With a high flow velocity, anchor movement started without any significant difference less than 4.3 % of the time. When tide speed exceeded 0.13 m/s and the direction of the waves matched, the silt protector was not able to perform due to collisions with surrounding sea structures. When installing a silt protector, the fluid flow situation and the silt protector situation must be carefully analyzed using the mass-spring method to apply the result found in this study.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.2
• /
• pp.168-176
• /
• 2017

HNS accidents involve large-scale fires and explosions, causing numerous human casualties and extreme environmental pollution in the surrounding area. The widespread diffusion of effects should be prevented through rapid decision making. In this study, a high-quality, standardized, and digitized HNS accident databases has been generated based on the HNS standard code proposed. Furthermore, the HNS Accident Tracking System (HATS) was applied and implemented to allow for systematic integration management and sharing. In addition, statistical analysis was performed on 76 cases of domestic HNS accident data collected over 23 years using HATS. In Korea, an average of 3.3 HNS accidents occurred each year and major HNS accident factors were Springs (41 %), Aprons (51 %), Chemical Carriers (49 %), Crew's Fault (45 %) and Xylenes (12 %). (The number in parentheses is the percentage of HNS accident factors for each HNS accident classification)

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09c
• /
• pp.72-77
• /
• 2010

The Incheon Bridge, which was opened to the traffic in October 2009, is an 18.4 km long sea-crossing bridge connecting the Incheon International Airport with the expressway networks around the Seoul metropolitan area by way of Songdo District of Incheon City. This bridge is an integration of several special featured bridges and the major part of the bridge consists of cable-stayed spans. This marine cable-stayed bridge has a main span of 800 m wide to cross the vessel navigation channel in and out of the Incheon Port. In waterways where ship collision is anticipated, bridges shall be designed to resist ship impact forces, and/or, adequately protected by ship impact protection (SIP) systems. For the Incheon Bridge, large diameter circular dolphins as SIP were made at 44 locations of the both side of the main span around the piers of the cable-stayed bridge span. This world's largest dolphin-type SIP system protects the bridge against the collision with 100,000 DWT tanker navigating the channel with speed of 10 knots. Diameter of the dolphin is up to 25 m. Vessel collision risk was assessed by probability based analysis with AASHTO Method-II. The annual frequency of bridge collapse through the risk analysis for 71,370 cases of the impact scenario was less than $0.5{\times}10^{-4}$ and satisfies design requirements. The dolphin is the circular sheet pile structure filled with crushed rock and closed at the top with a robust concrete cap. The structural design was performed with numerical analyses of which constitutional model was verified by the physical model experiment using the geo-centrifugal testing equipment. 3D non-linear finite element models were used to analyze the structural response and energy-dissipating capability of dolphins which were deeply embedded in the seabed. The dolphin structure secures external stability and internal stability for ordinary loads such as wave and current pressure. Considering failure mechanism, stability assessment was performed for the strength limit state and service limit state of the dolphins. The friction angle of the crushed stone as a filling material was reduced to $38^{\circ}$ considering the possibility of contracting behavior as the impact.

• International Area Studies Review
• /
• v.16 no.3
• /
• pp.293-321
• /
• 2012

This study aims to examine how institutions has been formed to deepen interdependence and to keep check in trade on the border regions of East Sea Rim between the macro structure and micro behaviors. The transitional nations such as China, Russia, and North Korea adjacent to the East Sea Rim exhibits unique characteristics in terms of transaction governance structure. While the regional economy in northeast China is still overwhelmed by the stated-owned enterprises(SOEs), it strongly encourages the private economic trade to form institutional economy through the border trade port and peddler trade market. Thus trade is shaped by the mixed governance. In far east Russia, whereas the SOEs are in charge of exporting oil, gas etc., private firms and small scale traders are importing household items, so that it can also be called as the mixed governance, while informal social networks simultaneously work. In North Korea, for the trade, since the firms are mainly required to have the permits from the different levels of government, it is regarded as the hierarchical governance. The institutional economics seems to well explain the changing agencies and their influence on the trade among the regions in the East Sea Rim.

• Geophysics and Geophysical Exploration
• /
• v.8 no.1
• /
• pp.104-111
• /
• 2005

Dmitri Donskoi, the Russian cruiser launched in 1883, is known to have sunk near Ulleung Island (East Sea, Korea) on May 29, 1905, while it was participating in the Russo-Japanese War. In order to find this ship, information about its possible location was obtained from Russian and Japanese maritime historical records. The supposed location of the ship was identified, and we conducted a five-year geophysical survey from 1999 to 2003. A reconnaissance three-dimensional topographic survey of the sea floor was carried out using multi-beam echo sounder, marine magnetometer, and side-scan sonar. An anomalous body identified through the initial reconnaissance survey was identified by a detailed survey using a remotely operated vehicle, deep-sea camera, and the mini-submarine Pathfinder. Interpretation of the acquired data showed that the ship is hanging on the side of a channel, at the bottom of the sea 400 m below sea level. The location is about 2 km from Port Jeodong, Uleung Island. We discovered 152 mm naval guns and other war materiel still attached to the hull of the ship. In addition, the remnants of the steering gear and other machinery that were burnt during the final action were found near the hull. Strong magnetic fields, resulting from the presence of volcanic rocks in the survey area, affected the resolution of the magnetic data gathered; as a result, we could not locate the ship reliably using the magnetic method. Severe sea floor topography in the gully around the hull gave rise to diffuse reflections in the side-scan sonar data, and this prevented us from identifying the anomalous body with the side-scan sonar technique. However, the sea-floor image obtained from the multi-bean echo sounder was very useful in verifying the location of the ship.