• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.6
• /
• pp.663-670
• /
• 2014

The Pyeongtaek port is expected lack of waiting anchorage due to increase of incoming ships whit increasing of trading volume in the near future. In case of an anchorage facility's structural alternations and expansion, it should be considered comprehensively how it affects other anchorage facilities. In addition, the volume of ship traffic to relevant area should be estimated accurately and then the facility's scale is calculated. In this paper, researchers calculated cargo per unit ship with the throughput for every ship and predicted the number of ships which had entered Pyeongtaek port. As a result, the port's ability to be docked was predicted to be not enough in 2030. It will exceed the number of ships able to cast anchor at specific two parts simultaneously 12.6 and 1.6 respectively consequently, the necessity to expand the ports was suggested. Hence, the best expansion plan was examined with analysis of marine transportation environment at each ports and the improvements suggested are anchoring ships at Ippado anchorage is 19.7 and the one at Janganseo anchorage is 12.6.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.4
• /
• pp.525-532
• /
• 2022

The port of Mokpo operates the largest number of coastal passenger ships and routes in Korea. These coastal passenger ships pass through narrow channels in the south-west coast of Korea owing to the geographical effect. It is difficult to find a research for the safety of the marine traffic environment in the narrow channel used by coastal passenger ship. Therefore, in this study, the navigation safety of the target coastal passenger ship was analyzed in the narrow channel near the port of Mokpo using the Korea design standard for port and harbour facilities. As a result of the analysis, the width of the narrow channel between Maek-island and Dali-island is narrower than 1.5 times of the target ship's length over all, the degree of curvature of the narrow channel exceeds the standard value of 30°, and several fishing gears exist near the narrow channel. Finally, the following were suggested to improve the safety of navigation on the narrow channel: keeping one-way traffic during the day-time, and navigating through the designated fairway during night·visibility restriction·low tide.

• Journal of Navigation and Port Research
• /
• v.46 no.6
• /
• pp.530-537
• /
• 2022

Tug services are essential services to ensure port safety. However, due to the relatively low barrier to entry into the tug service market, the number of service companies has increased, which has led to growing concerns about excessive competition among companies and poor service quality. To solve these problems, it is necessary to prepare a service quality evaluation system, but full-fledged implementation remains far away. The purpose of this study is to develop a tug service quality evaluation model that can be practically applied. To this end, an evaluation model consisting of two major categories, eight middle categories, and 25 detailed evaluation indicators was developed through a literature review, case studies, and expert interviews. AHP analysis is also conducted to derive the relative importance of the evaluation items. As a result of the analysis, it was found that the weight of user satisfaction was higher than that of management evaluation. In addition, the weights for each detailed indicator of management evaluation were in descending order of facility management, company management, and financial soundness, and it was analyzed that the management of facilities directly used for services was important. User satisfaction is in descending order of safety, punctuality, service satisfaction convenience, and transparency. These results show that securing safety is a top priority, and that the inherent quality of services such as safety and punctuality is more urgent than those of the convenience and transparency of the process in terms of providing preliminary services.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.6
• /
• pp.654-661
• /
• 2018

This paper analyzes the type of facilities and equipment of the marina port and analyzes its lift facilities (lift pier) and equipment (marine mobile lift). It set up the lift facilities and equipment standards. Depending on the gross tonnage of vessels in operation in Korea, the required inner width of lift piers is 5.50 m for 35-ton vessels, and 6.20 m for 50-ton vessels. The inside width of the marine mobile lift is 6.10 m for 35-ton vessels, and 6.80 m for 50-ton vessels. There are two places where the target ship can be lifted from the lift pier installed on the domestic marina, and other marinas' lift piers inner widths are insufficient by about 0.35 ~ 0.50 m. Among the marine mobile lifts in operation, there were two apparatuses that secured the inside width necessary to lift the target vessel. Other marine mobile lifts' inner widths are insufficient by about 0.3 ~ 0.6 m.

• Journal of the Korean Society of Safety
• /
• v.25 no.6
• /
• pp.203-209
• /
• 2010

A compact ANSI/EIA 709.1 protocol analyzer system suited for maintenance of LonWorks network for safety management of underground facilities was developed and tested. The hardware is based on the TMS320LF2406A embedded system, and the software was designed using Visual C++6.0 under Windows XP environment. Connected to the LonWorks network the developed protocol analyzer decodes the raw packets and pass them to the master PC through USB port. Then on the PC the packets are processed and analyzed in various aspects and the key features that are essential to the maintenance of LonWorks network installed at underground facilities are displayed in a user-friendly format. Performance of the developed protocol analyzer was evaluated through a series of experiments, by measuring the speed of packet analysis and the error rate. The protocol analyzer proved to work reliably even under the increased bandwidth. However, more comprehensive tests under various underground environmental conditions are desired.

• Journal of the Korean Society of Radiology
• /
• v.15 no.6
• /
• pp.833-839
• /
• 2021

The Possibility of Denuclearization Verification of Korean peninsula is mentioned. Considering the geographical and linguistic advantages, it is necessary to show willingness to participate in the denuclearization verification. In this study, investigation about nuclear facilities, characteristic of facilities, core resource, operation history, geographic/weather environment were performed. Transport route accessibility analysis and risk analysis for development of transport scenario were performed. Accessibility analysis was classified into airport, port, and vehicle transport. Distance by route, estimated time required, and transit roads were analyzed. In this process, it was possible to confirm the suitability of the vehicle transport scenario. Through follow-up studies, we intend to develop an optimal transport scenario.

• Journal of Korea Port Economic Association
• /
• v.39 no.1
• /
• pp.131-147
• /
• 2023

Gwangyang Port Marine Industry Cluster is the only marine industry cluster in Korea that is currently in operation, but despite the implementation of various revitalization policies since its opening, the occupancy rate has been low so far. Accordingly, this study aims to identify the constraints of the current system that hinder the inducement of tenant companies and to suggest revitalization measures. For this purpose, this study analyzed the current status of research and development(R&D) projects in the port, shipping and logistics sector, which is a core industry of the Gwangyang Port Marine Industry Cluster. And a survey was conducted on companies with potential to move in. As a result, the proportion of R&D in the core industry sectors is lower than in other sectors, and most of R&D projects are being carried out mainly by small and medium-sized enterprises. In addition, the low need for port facilities and low accessibility to Gwangyang Port were derived as constraints. Considering the results, this study suggests four revitalization measures to induce tenant companies as follows. First, it is necessary to expand the scope of core industries from the current shipping, ports, and logistics to the entire maritime and fisheries, so that companies performing R&D in the industry can move in. Second, the industry code currently specified as a qualification need to be revised to include both the industry of the enterprise carrying out R&D projects and the core industry. Therefore, this study suggests an expanded industry code list that can replace current list. Third, a transition of tenant recruitment system from the regular system(once or twice a year) to the occasional system is proposed so that companies can move in flexibly when demand arises. Finally, in order to overcome geographically low accessibility, technology development support projects specialized in R&D that prospective tenant companies actually need are needed rather than financial support.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.10 no.1
• /
• pp.92-101
• /
• 2007

Urban freight system includes not just intra-urban freight movement but also inter-urban movement as well. Hence, to make Busan a hub of North-east asia freight movement it is necessary to develop a comprehensive plan for infrastructure expansion as well as improvement of freight system based on the present facility situation. This study identifies the status of freight facilities in Busan by establishing the freight related infrastructure Database(DB) utilizing Geographic Information System(GIS), and to enable planners and decision-makers to utilize the DB to develop a future plan. The DB includes port facilities, major and minor arterial roads, railroad lines and facilities, depots, center city business areas, and urban infrastructures which are related to the freight movements. The analyses show that major transportation facilities in Busan consist of roads, railroads, coastal transportation, and international transportation, and it was found that intermodal facilities are inadequate for freight system in Busan. The results of this study will be useful for freight experts and planners to develop a comprehensive freight system plan.

• International Journal of Precision Engineering and Manufacturing
• /
• v.7 no.1
• /
• pp.13-17
• /
• 2006

Self-Assembled Monolayers (SAMs) formed by alkanethiol adsorption to thin metal film are widely being investigated for applications as coating layer for anti-stiction or friction reduction and in fabrication of micro structure of molecules and bio molecules. Recently, there have been many researches on micro patterning using the advantages of very thin thickness and etching resistance of Self-Assembled Monolayers in selective etching of thin metal film. In this report, we present the several machining method to form the nanoscale structure by Mask-Less laser patterning using alknanethiolate Self-Assembled Monolayers such as thin metal film etching and heterogeneous SAM structure formation.

• Journal of Korea Multimedia Society
• /
• v.18 no.5
• /
• pp.631-640
• /
• 2015

Recently CCTV system is installed widely purpose to enhanced physical security, gathering criminal evidence and management of facilities. In spite of supporting strong management function, CCTV system has weak security function. Therefore high security management function is required. Generally it's not easy to control the devices under NAT using a NMS(Network Management System). So we design and implement alive check algorithm of CCTV devices under NAT using DVRNS address resolution and TCP session check. We evaluated and analyzed of developed system on real environment which includes about 100 DVRs under NAT. As a result of test, it showed that device alive check and DVRNS address resolution were well performed without any error.