• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.06a
• /
• pp.87-88
• /
• 2012

The IHO developed the S-100 standard for Digital Hydrographic Data in order to assist the proper and efficient use of hydrographic data and information for the safety of navigation and the protection of marine environment. The former model, S-57, was considered outdated to be utilized as the basis for the next-generation Electronic Chart(ENC) product specification. The key feature of the S-100 standard is the use of Registry and its components, Registers. This online-based Registry provides a universal standard that can be implemented in the actual performance of the navigation system with convenience. In the current situation, the only registry is owned by the IHO and it is available to domain experts. However, since S-100 is an international standard operated by an international organization, the process of the changes and updates of the data requires time before immediate implementation when demanded. Therefore, regarding the safety of navigation of the domestic users and mariners, a separate domestic registry is necessary to develop a domestic Information Registry. This study specifically aims to build a Registry based on IHO published S-99 through designing an adequate website dedicated for its purpose to provide collection of definitions and hydrographic data.

• Journal of Navigation and Port Research
• /
• v.29 no.6 s.102
• /
• pp.515-522
• /
• 2005

The ship plating is generally subjected to. combined in-plane load and lateral pressure loads, In-plane loads include axial load and edge shear, which are mainly induced by overall hull girder bending and torsion of the vessel. Lateral pressure is due to. water pressure and cargo. These load components are nat always applied simultaneously, but mare than one can normally exist and interact. Hence, far mare rational and safe design of ship structures, it is af crucial importance to. better understand the interaction relationship af the buckling and ultimate strength far ship plating under combined loads. Actual ship plates are subjected to relatively small water pressure except far the impact load due to. slamming and panting etc. The present paper describes an accurate and fast procedure for analyzing the elastic-plastic large deflection behavior up to. the ultimate limit state of ship plates under combined loads. In this paper, the ultimate strength characteristics of plates under axial compressive loads and lateral pressure loads are investigated through ANSYS elastic-plastic large deflection finite element analysis with varying lateral pressure load level.

• Journal of Navigation and Port Research
• /
• v.41 no.3
• /
• pp.79-86
• /
• 2017

Ballast water filled into and discharged from the ballast tank of a ship has a negative impact on local marine environment due to various aquatic organisms contained therein. The IMO developed and adopted "The International Convention for the Control and Management of Ships Ballast Water and Sediments, 2004" with the purpose of protecting the marine environment from transfer of harmful aquatic organisms in ballast water carried by ships. The IMO BWM Convention was approved in September 2016 and ships must be equipped with ballast water management system after September 2017. Ships' ballast water treatment methods are divided into using active substances as electrolytic type, ozone type, chemical dosing type and using physical treatment type as filter type, ultraviolet type. It is also used with a combination of two methods. Electrolysis is superior in terms of cost and efficiency. In this study, basic principles, components, and land base test contents of electrolysis ballast water treatment system, a direct electrolyzed ballast water treatment system, were examined. Land base test was conducted with 300m3/h capacity device at the KIOST Geoje plant where the government test facility was installed. This test validated that the system meets IMO standards.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.29 no.1
• /
• pp.61-67
• /
• 2005

The ship plating is generally subjected to combined in-plane load and lateral pressure loads. In-plane loads include axial load and edge shear, which are mainly induced by overall hull ginder bending and torsion of the vessel. Lateral pressure is due to water pressure and cargo. These load components are not always applied simultaneously, but more than one can normally exist and interact. Hence, for more rational and safe design of ship structures, it is of crucial importance to better understand the interaction relationship of the buckling and ultimate strength for ship plating under combined loads. Actual ship plates are subjected to relatively small water pressure except for the impact load due to slamming and panting etc. The present paper describes an accurate and fast procedure for analyzing the elastic-plastic large deflection behavior up to the ultimate limit state of ship plates under combined loads. In this paper, the ultimate strength characteristics of plates under axial compressive loads and lateral pressure loads are inverstigated through ANSYS elastic-plastic large deflection finite element analysis with varying lateral pressure load level.

• Journal of Navigation and Port Research
• /
• v.42 no.3
• /
• pp.217-226
• /
• 2018

International major container terminals are trying to expand automation facilities in order to dominate the competition and grow as central harbors. Recently, system design and development were put underway to fully integrate automation systems in container terminals. This is because it can focus on improving the efficiency of the yard operations in container terminals and facilitates integration with other container terminal operation processes. Automation in the container terminal business today is essential to better serve customers and improve profitability. Real-time position and status of container handling equipment (CHE) have been required for more efficient terminal operations and consequently higher productivity. This study examined the real-time location and status of the container terminal automation equipment using DGPS in container terminals, and reviewed the components and functions of the container terminal automation yard equipment systems that developed, applied, and operated the automation systems. In addition, this study compared the existing yard system and the automation yard system and presented application methods. Also, the results revealed that the productivity of the container terminal and the efficiency of the transportation equipment can be further increased when the optimal yard automation transportation equipment system is used to efficiently operate the transportation equipment, which is the core equipment of the container terminal.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.11
• /
• pp.63-70
• /
• 2001

We demonstrate the MMIC (monolithic microwave integrated circuit) frequency doublers generating stable and low-cost 29 GHz local oscillator signals from 14.5 GHz input signals. These devices were designed and fabricated by using the M MIC integration process of $0.1\;{\mu}m$ gate-length PHEMTs (pseudomorphic high electron mobility transistors) and passive components. The measurements showed S11 or -9.2 dB at 145 GHz, S22 of -18.6 dG at 29 GHz and a minimum conversion loss of 18.2 dB at 14.5 GHz with an input power or 6 dBm. Fundamental signal of 14.5 GHz were suppressed below 15.2 dBe compared to the second harmonic signal at the output port, and the isolation characteristics of fundamental signal between the input and the output port were maintained above :i0 dB in the frequency range 10.5 GHz to 18.5 GHz. The chip size of the fabricated MMIC frequency doubler is $1.5{\times}2.2\;mm^2$.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.5
• /
• pp.69-75
• /
• 2001

In this paper, a fast and easy impedance matching method, which could give the impedance matching component for the general 1 or 2-port network was introduced. First, the entire network structure was defined which consists of the network part to be matched and the impedance matching part composed of inductors and capacitors. Next, the transmission matrix and input and output impedances of the entire network from the terminal impedance conditions were calculated, then the exact solutions for the matching components were obtained. To verify the efficiency of this method, this method was applied to the CDMA If band withdrawal weighted SAW transversal filter, and investigated the effects of the impedance matching before and after, through the simulation and experiment. As the result, the performance of a fractional bandwidth of 1.2%, insertion loss of 29 dB, and VSWR of 80 have improved to a factional bandwidth of 1.8％, insertion loss of 9 dB, VSWR of 3 at 85.38 MHz center frequency. The result shows that this impedance matching method could be used in the SAW devices and other types of 1 or 2-port network.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.4
• /
• pp.659-666
• /
• 2006

Servo-motors are used as key components of automated system by performing precise motion control as accurate positioning and accurate speed regulation in response to the commands from computers and sensors. Especially, the linear brushless servo-motors have numerous advantages over the rotary servo motors which have connection with the friction induced transfer mechanism such as ball screws, timing belts, rack/pinion. This paper proposes an estimation method of unknown motor system parameters using the informations from the sinusoidal driving type linear brushless DC motor dynamics and outputs. The estimated parameters can be used to tune the controller gain and a disturbance observer. In order to meet this purpose high performance Digital Signal Processor, TMS320F240, designed originally for implementation of a Field Oriented Control(FOC) technology is adopted as a controller of the liner BLDC servo motor. Having A/D converters, PWM generators, rich I/O port internally, this servo motor application specific DSP play an important role in servo motor controller. This linear BLDC servo motor system also contains IPM(Intelligent Power Module) driver and hail sensor type current sensor module, photocoupler module for isolation of gate signals and fault signals.

• Journal of Navigation and Port Research
• /
• v.38 no.6
• /
• pp.607-614
• /
• 2014

This article aims to explore and discuss research trends in global cruise industry using keyword network analysis. We visualize keyword networks in each of four groups of 1982-1999, 2000-2004, 2005-2009, 2010-2014 based on the top 20 keyword nodes' degree centrality and betweenness centrality which are selected among four centrality measurements, comparing them with frequency order. The article shows that keyword frequency collected from 240 articles published in international journals is subject to Zipf's law and nodes degree distribution also exhibits power law. We try to find out research trends in global cruise industry to change some important keywords diachronically, visualizing several networks focusing on the top two keywords, cruise and tourism, belonging to all the four year groups, with high degree and betweenness centrality values. Interestingly enough, a new node, China, connecting the top most keywords, appears in the most recent period of 2010-2014 when China has emerged as one of the rapid development countries in global cruise industry. Therefore keyword network analysis used in this article will be useful to understand research trends in global cruise industry because of increase and decrease of numbers of network types in different year groups and the visual connection between important nodes in giant components.

• Journal of Navigation and Port Research
• /
• v.38 no.3
• /
• pp.227-232
• /
• 2014

There are three essential components of eLoran: dLoran, data map of ASF, and the Loran data channel. Particularly, dLoran improves navigation accuracy, which is the core technology of eLoran systems. The requirement of HEA's absolute accuracy, less than 20 meters, can be satisfied via dLoran measurements and their corrections. In this study, dLoran measurements using the Pohang Loran-C (9930M) station signal were conducted at Yeongil Bay. We established a dLoran reference station at Homigot Management Office for navigation aids within the Bay. We estimated the effectiveness of the dLoran between the reference site (Homigot Management Office) and a test site (Heunghwan beach) by measuring TOAs. We verified that the TOA data measured at these two regions were highly correlated. The temporal differences in the data between the dLoran reference station and test site were about 10~30 ns per day, which is equivalent to a ranging error of 3~9 m. This result shows that eLoran can meet the requirement of 8~20 meters position accuracy for maritime HEA by correcting the ASF at the user's receiver.