• Journal of Advanced Navigation Technology
• /
• v.14 no.2
• /
• pp.176-182
• /
• 2010

This paper proposes that an inverse class-E amplifier is used a tunable parallel resonator at output port in order to maintain a high power-added efficiency(PAE) and output power with wide frequency ranges. A tunable circuit has a constant Q factor at operating frequency ranges and because of using varactor diode, the inductor and capacitor values of resonator can be changed. Also, the inductance value for zero-current switching (ZCS) is implemented a lumped element and the capacitance value is made a distributed element for phase compensation. The inverse class E amplifier using tunable parallel resonator is obtained to deliver 25dBm output power and achieve maximum power added efficiency(PAE) of 75% at 65-120MHz frequency ranges.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.5
• /
• pp.1111-1116
• /
• 2005

The necessity of the home network have been enlarged gradually according to the distribution of ultra-high speed internet, the expansion of a digital information equipment and the change of a life pattern. In this paper, we proposed the embedded ethernet module that could be operate on eight bit system, but it could control home appliance with full ethernet speed. The embedded ethernet module consists of 8051 MCU and Hardware TCP/IP. In this module, we construct simple web server and port remote control program for I/O device control. We verified through internet that the developed embedded ethernet module could control and check home appliances anywhere and anytime. We expect the developed ethernet module can build up niche market at home network. And it will be helpful to activate home network market.

• Journal of information and communication convergence engineering
• /
• v.14 no.4
• /
• pp.252-257
• /
• 2016

An edge-located electromagnetic bandgap (EL-EBG) structure using a defected ground structure (DGS) is proposed to suppress resonant modes induced by edge excitation in a two-dimensional planar parallel plate waveguide (PPW). The proposed EL-DGS-EBG PPW significantly mitigates multiple transverse-magnetic (TM) modes in a wideband frequency range corresponding to an EBG stopband. To verify the wideband suppression, test vehicles of a conventional PPW, a PPW with a mushroom-type EBG structure, and an EL-DGS-EBG PPW are fabricated using a commercial process involving printed circuit boards (PCBs). Measurements of the input impedances show that multiple resonant modes of the previous PPWs are significantly excited through an input port located at a PPW edge. In contrast, resonant modes in the EL-DGS-EBG PPW are substantially suppressed over the frequency range of 0.5 GHz to 2 GHz. In addition, we have experimentally demonstrated that the EL-DGS-EBG PPW reduces the radiated emission from -24 dB to -44 dB as compared to the conventional PPW.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.6
• /
• pp.888-894
• /
• 2018

In this paper, we proposed a mixed-mode s-parameter measurement system for measuring the performance of twisted pairs. A twisted pair is a balanced type component, its characteristics can not be directly measured using network analyzer, which is generally implemented as a unbalanced type. It is possible to convert between balanced signal and unbalanced signal by using a balun but it restricts the frequency range of the measurement system. The proposed system measures the performance of twisted pairs by measuring mixed-mode s-parameters using a 4-port vector network analyzer and a designed fixture, without using a balun. We measured the performance of a commercial Ethernet cable and compared with the results which measured by using baluns. The results showed that the proposed system is capable of measuring the performance of twisted pairs.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.1
• /
• pp.382-389
• /
• 2012

The fabricated report attack will not only cause false alarms that waste real-world response efforts such as sending response teams to the event location, but also drains the finite amount of energy in a wireless sensor network. In this paper, we propose a probabilistic filtering method for sensor network security (PFSS) to deal with filtering for the fabricated report. On the basis of filtering scheme, PFSS combines cluster-based organization and probabilistic verification node assignment using distance of from cluster head to base station for energy efficiency and hot spot problem. Through both analysis and simulation, we demonstrate that PFSS could achieve efficient protection against fabricated report attack while maintaining a sufficiently high filtering power.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.8-8
• /
• 2000

PICARD (Port-Interface Component Architecture for Real-time system Design) is a software architecture and environment, which is aimed to reduce development time and cost of real-time, control system. With PICARD, a control engineer can construct a control system software by assembling pre-built software components us ing interact ive graphical development environment. PICARD consists of PVM(Picard Virtual Machine) , a component library, and PICE(PIcard Configuration Editor). PVM is a real-time engine of the PICARD system which runs control tasks on a real-time operating system. The component library is composed of components which are called task blocks. PICE is a visual editor which can configure control tasks by creating data-flow diagrams of task blocks or Ladder diagrams for sequential logics. For the communication between PVM on a target system and PICE on a host computer, a simple protocol and tools for stub generation was dove]oped because RPC or CORBA is difficult to be applied for the embedded system. New features such as a byte-code based run time system and a simple and easy MMI builder are also introduced.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.7
• /
• pp.653-660
• /
• 2015

This paper describes the design of the force measuring system for an industrial robot's deburring work. The force measuring system is composed of a three-axis force sensor, a measuring device, a housing and a cover. The three-axis force sensor can detect x-direction force, y-direction force and z-direction force at the same time. The measuring device is designed using DSP(Digital Signal Processor), and have a RS-232 and a RS-485 communication port for sending force data to PC or other controller. As a result of test, the repeatability error and the non-lineality error of the three-axis force sensor are less than 0.03%, and the interference error of the sensor is less than 0.95%. It is thought that the force measuring system can be used for an industrial robot's deburring work.

• Journal of the Korea Society for Simulation
• /
• v.10 no.2
• /
• pp.33-46
• /
• 2001

Recently, the usage of containers in marine transportation is rapidly increasing. The problem of ship stability is important because of its direct influence to the loss of the human-life, ship, and merchandise. However, the assessment for ship stability during container loading/unloading in port is dependent on human experience only. On the other hand, the emerging information and communication technologies of shipbuilding industrial environments are rapidly changing. To respond to the situation, a new paradigm has been matured with new concepts such as the concrete method. Especially, all the efforts are shown to be concentrated to realize the concept of Simulation Based Design(SBD) based on three dimensional Computer Aided Design(CAD) model. In this paper, ship model-based simulation methodology for design and operation of ship is suggested, and for the verification of suggested methodology, the system for stability assessment of ship during container loading/unloading was developed using ENVISION, a general-purpose simulation system. The developed system consists of geometric modeling subsystem, basic calculation subsystem, and Computer Aided Engineering(CAE) subsystem. In addition, interface to CAE/CAD /simulation system such as SIKOB and ENVISION is provided.

• Proceedings of the KSME Conference
• /
• 2001.06b
• /
• pp.42-47
• /
• 2001

Analyzing the ECG signal, we can find heart disease, for example, arrhythmia and myocardial infarction, etc. Particularly, detecting arrhythmia is more important, because serious arrhythmia can take away the life from patients within ten minutes. In this paper, we would like to introduce the signal processing for ECG analysis and the device made for wireless communication of ECG data. In the signal processing, the wavelet transform decomposes the ECG signal into high and low frequency components using wavelet function. Recomposing the high frequency bands including QRS complex, we can detect QRS complex and eliminate the noise from the original ECG signal. To recognize the ECG signal pattern, we adopted the polynomial approximation partially and statistical method. The ECG signal is divided into small parts based on QRS complex, and then, each part is approximated to the polynomials. Comparing the approximated ECG pattern with the database, we can detect and classify the heart disease. The ECG detection device consists of amplifier, filters, A/D converter and RF module. After amplification and filtering, the ECG signal is fed through the A/D converter to be digitalized. The digital ECG data is transmitted to the personal computer through the RF transceiver module and serial port.

• Journal of Convergence Society for SMB
• /
• v.4 no.4
• /
• pp.13-18
• /
• 2014

The usage rate of user due to advances in smartphone development is higher than the usage rate to use a PC. However, smartphone usage popularized research to protect sensitive information, such as smart phone users personal information, financial information is a small state. In this paper, we analyzed the various vulnerabilities in smartphone studies to date have been looking into the corresponding port smart consumer dispute resolution methods and criteria for smartphone security attack methods and analysis. In particular, the threat of such a network, malware, Peep attack of the security threats arising from the smartphone they can avoid or mitigate threats to minimize the smartphone security damage is done to the disclosure of personal information, such as direct damage or financial loss the analysis of that method.