• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2000년도 추계학술대회 학술발표 논문집
• /
• pp.129-132
• /
• 2000

Grouping ports in certain region by their characteristics could be used as the principal informations to establish national policy for port development or investment and also to analyze the competitiveness between ports. Currently Korean ports are divided into two groups such as the local port and the designated port containing foreign trade port and coastal port under the Korean port law. These divisions seem to be used for port administration as the matter of convenience but some qualitative grouping is needed for research of port problems. In this paper, 28 major Korean ports were clustered by the similar characteristics using Fuzzy C-Means and found to be classified 8 qualitative groups.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 1998년도 추계학술대회논문집:21세기에 대비한 지능형 통합항만관리
• /
• pp.51-58
• /
• 1998

This study is to define the Automated Container Terminal(ACT) and container terminal system. Also, we analyze the present condition of the container terminal system in Pusan port and its automation level by systems approach. And this paper aims at evaluating on the priority of R&D investment until the beginning of the second stage of New Pusan Port Project(2006). In this process we have considered 8 factors (cost, labor, area, time volume, reliability, safety, convenience) to analyze 6 subsystems. The priority order of R&D until target year by sub-systems is as follow : Cargo Handling System〉Transfer System〉Port Entry System〉Storage System(Distribution&Manufacturing System included)〉Inland Transport System〉Port Information System.

• 통상정보연구
• /
• 제8권1호
• /
• pp.183-201
• /
• 2006

According to the result of this study, China and Japan, the competing countries of Korea are progressing their policy to develop port more intensively than ever. To cope with this situation, it is required for Korean port to prepare systematic and strategic measure as follows. First, the cooperation strategy is necessary to operate domestic port. Second, it is required to set strategy to construct infrastructure for physical distribution in the port. Third, it is necessary to consider inducing transshipment cargo and development of strategy for connected transportation network. Fourth, the system of international physical distribution centering around complex behind ports shall be constructed.

• 한국항해항만학회지
• /
• 제32권7호
• /
• pp.561-568
• /
• 2008

Due to the rapid changes in world trade and shipping environment, today's ports face ever-increasing competition, from adjacent competing ports. To this reason, port service quality has been recognized as an important strategy to take competitive advantage for those competition. In general, service quality has effect on customer loyalty, and customer loyalty is the resource to sustain competitive advantage which service providers or service producers. By improving customer loyalty, companies can get more benefits and added value. However, this causality qf port service quality has not been clearly identified. Thus, various empirical studies in relation to port service quality are needed. The aim of this study is to analyze the effect of perceived port service quality on customer satisfaction and loyalty. To achieve this aim, we established 8 hypotheses based on SERVPERF in order to test correlations of 5 dimensions of port service, port service quality, customer satisfaction, and customer loyalty. From the result of the hypothesis testing, we found that customer satisfaction and port service quality do not affect customer loyalty in spite of high effect of port service on customer satisfaction.

• 마이크로전자및패키징학회지
• /
• 제28권3호
• /
• pp.25-32
• /
• 2021

본 논문에서는 X-Band 대역에서 이중 편파 특성을 갖는 Magneto-Electric(ME) dipole 배열안테나를 제안하고, 이를 Low Temperature Co-fired Ceramic (LTCC) 공정을 이용하여 구현 및 측정하였다. 제안된 배열안테나는 LTCC로 구성된 1 × 1 ME dipole 안테나 32 개를 Teflon PCB에 배열하여 8 × 4 배열 안테나로 구성된다. 1 × 1 ME dipole 안테나는 두 쌍의 방사체에서 각각 수직 편파와 수평 편파를 방사하여 이중 편파를 구현하게 된다. 2개의 Port 급전은 LTCC를 이용한 적층 공정을 통해 구현하였으며, 각 각의 Port는 포트 간 격리도를 확보하기 위해 Γ-shaped feeding strip을 통해 독립적으로 방사체에 급전된다. 안테나 배열에 사용된 Teflon PCB는 4층 구조로 형성하였으며, 상단 면과 하단 면을 통해 2개의 Port가 급전된다. 그리고 배열되는 안테나와 Teflon PCB의 임피던스 정합을 위해 Teflon PCB의 전송선로에 λ_g/4 변환기를 적용하였으며 시뮬레이션을 통해 최적 파라미터를 얻었다. 구현된 ME dipole 8 × 4 배열안테나의 크기는 15.5 mm × 11 mm × 4.2 mm이며, Port 1 급전 시 측정된 방사 최대 이득은 18.2 dBi, cross-pol은 1.0 dBi이고 Port 2 급전 시 측정된 방사 최대 이득은 18.1 dBi, Cross-pol은 3.2 dBi로 확인하였다.

• 한국항만학회지
• /
• 제11권2호
• /
• pp.321-337
• /
• 1997

Rapid change in the technological environment of marine transportation and the development of the ocean shipping industry have fostered a revolution in the port system. This in turn has caused major changes in the function and use of port in Korea. Aside from this. Mokpo Port, however continues to decline, because the existing port facilities and related subsystem are already obsolete with no chance of regaining operational effectiveness and treatment for proper implementation. Although a few studies have been done on the Mokpo Port, has not been found, any reseach for the analytical approach to the transportation system of it. This paper aims to make an extensive analysis of the physical distribution system in Mokpo Port focusing on the coordination of subsystems such as navigational aids system, quay handling and transfer system, storage system and inland transport system. The base of introduced simulation tool here is the queueing theory. The overall findings are as follows; 1. Among those vessels called at Mokpo Port in 1994, the average size of oceangoing vessels is 4,922.1 G/T, and the domestic is 317.8 G/T. The average arrival interval and service time of the domestic vessels are 6.0 hours and 24.1 hours respectively marking the berth occupation rate over 100%. Those for oceangoing vessels are 34.5 hours, 120.0 hours and 37.2%. In order to maintainin the berth occupation rate to 70% the capacity considering the 1994 of domestic piers must be extended to 145% and oceangoing vessels must be increased to 165% year called. 2. The capacity of approaching channel is enough to handle the total traffic volume. 3. Tugs are sufficiently being provided to handle all ships requiring their services 4. The capacity of storage and inland transportation systems are sufficient to handle the throughput and the yard stroage utilization rate of No.1 $\cdots$ No.5 is 4.5% and No.6 1S 30% of 1993's. 5. The utilization rate of LLc(Level Looping Crane) and PNT(PNeumaTic) are 2.7% and 18.8%, respectively. Practical solution and proposal for improvement of Transportation System in Mokpo Port are as follows; 1. To avoid the congestion in domestic pier introduction of a new port operation system is necessary allowing the domestic vessel to use the oceangoing pier. 2. To establish the port management information system to improve the efficiency of port operation. 3. To build a new storage system for high valued cargos including modernization of the present storage and handling system. 4. To insure the safety of navigation in approaching channel, The Vessel Traffic System including separation scheme is introduced. 5. To interest enormously on public relation to ship owner's association, shippers and consignees by showing that they can save cost and ship turnaround time in order to promote the call to Mokpo Port. At last, to be strategically change the function of Mokpo Port to the Leisure, Fishing & Ferry as well as Maritime port.

• 한국항해항만학회지
• /
• 제28권8호
• /
• pp.709-714
• /
• 2004

본 연구는 최근 물동량이 빠른 속도로 증가하고 있는 대련항, 천진항, 청도항, 상해항 등을 화물의 목적항으로 설정하고, 선박의 운항패턴 시나리오를 바탕으로 부산항에서 환적하는 경우와 중국항 직기항 등의 총운송비용 차이를 분석하였다. 이를 바탕으로 하여 부산항에서 환적할 때 직기항하는 경우보다 초과 발생하는 비용을 항만 당국이 선사에게 보전해 주는 인센티브 규모로 하고, 이를 충당할 수 있는 전대사용료 산정 방법을 제시하였다.

• 한국BIM학회 논문집
• /
• 제8권4호
• /
• pp.60-71
• /
• 2018

The port BIM technology has many problems such as lack of relevant system, high cost of BIM infrastructure construction, and process difference of existing domestic inter-industry. Since the port facilities as national key industries are managed and operated by public organizations, it is necessary to integrate IT resources and have a system that needs collective construction and joint utilization management. In this paper, we proposed the convergence of cloud computing technology and BIM as a way to reduce the infrastructure cost required for port BIM operation and to provide various BIM services for domestic process. To do this, we collected system requirements based on demand surveys of port staff and designed a BIM browser that provides IFC-based BIM server and customized services to reduce infrastructure cost in cloud computing environment. In terms of infrastructure, we designed cloud-based IaaS to support cost reduction, which is an essential component, and designed SaaS to support customized services in terms of services. We will perform performance verification with focus on whether port BIM servers and browsers have reached a level where they can manage four BIM models with different types and capacities.

• 대한안전경영과학회지
• /
• 제11권2호
• /
• pp.1-8
• /
• 2009

The port, differently from general working place, is a closed area to execute security, customs, and quarantine procedures. The loading and unloading is being done differently by cargoes, ships, berths, and equipments. To load and unload a lot of equipments and different types of labor are required, in which work flow is very complicated. As above mentioned the port is very unique and deteriorated working place including danger. Now frequency of cargo handling accidents in port is highest for the second time among all industries. The purpose of this study is to propose ways to analyze and establish the preventive measure for cargo handling accidents in port. We have collected 45 accidents happened at Incheon Port during the period from 2007 to 2009. And the result of analysis, we proposed the new safety management system and safety education to reduce cargo handling accidents and to promote the quality of cargo handling in Incheon Port. Within the framework of effective safety management of cargo handling in port, this study will help to revise and establish system, education, and standard working manual with respect to the port loading and unloading system.

• 한국항해항만학회지
• /
• 제34권8호
• /
• pp.641-647
• /
• 2010

우리나라 컨테이너항만 개발은 수요와 공급 논리에 따르기보다는 지역균형발전과 같은 정책적 고려에 의해 이루어진 측면이 강하다. 광양항의 시설공급 과잉뿐만 아니라 울산 신항, 포항 영일신항 등 지역 소규모 컨테이너 항만들이 운영에 어려움을 겪고 있는 것이 이를 반증한다. 특히, 지리적으로 인접한 일부 항만들이 중복되는 국내 시장을 대상으로 하고 있어서 항만 운영 활성화가 어려울 뿐만 아니라 지역적 국가적으로도 낭비 요인이 될 수 있다. 따라서 본 연구에서는 부산항, 광양항, 인천항, 평택항, 울산항 등 5개 항만을 대상으로 각 항만의 특성을 실증 자료를 기반으로 분석하여 각 항만의 특성과 위상을 구체적으로 제시하여 향후 항만개발에 대한 시사점을 도출하고자 한다. 이를 위해서 해당 항만의 환적 및 수출입화물 집중도, 항만별 대륙 기종점 현황, 항만별 우리나라 내륙 기종점 현황 등의 시계열 자료를 분석하여 항만을 분류하고 기능을 정립하였다.