• 제목/요약/키워드: Porous thin film

검색결과 200건 처리시간 0.032초

칼릭스아렌 포로젠을 이용한 다공성 박막의 초기 나노기공 형성과정에 관한 연구 (A study on the Initial Nanopore Formation in the Calix Arene Based Porogen Templated Porous Thin Film)

  • 김도헌;임진형
    • Korean Chemical Engineering Research
    • /
    • 제49권5호
    • /
    • pp.669-675
    • /
    • 2011
  • 다공성 구조로 되어있는 차세대 저유전 박막(k<2.0)의 나노 기공의 초기 형성 과정을 이해하기 위하여 실세스퀴옥산(silsesquioxane; SSQ) 매트릭스에서 분산된 4-tert-butyl calix[4]arene-O,O',O",O"'-tetraacetic acid tetraethyl ester(CA[4]) 포로젠이 열분해에 의해서 나노 기공으로 전환되는 과정을 Fourier Transform Infrared Spectroscopy(FT-IR)와 in-situ Position Annihilation Lifetime Spectroscopy(PALS) 연구를 통해 분석하였다. SSQ/CA[4] 하이브리드 시스템은 열 경화에 따라 효과적인 기공 구조의 균일한 박막을 제공하였다. SSQ/CA[4] 10, 20% 두 종류의 하이브리드 박막을 in-situ PALS 분석을 시행한 결과, CA[4] 포로젠의 분해 거동이 달랐다. SSQ/CA[4] 10% 하이브리드 박막은 $300^{\circ}C$ 이상부터 단분자 포로젠으로부터 기인한 메조포어(~1.5 nm)가 생성되기 시작하였으나, SSQ/CA[4] 20% 하이브리드 박막은 상대적으로 낮은 온도인 $250^{\circ}C$부터 상태로 CA[4] 분자들이 자가 조립된 마이셀로부터 기인한 메조포어(2.5~3.0 nm)가 생성되었다. 이는 SSQ/CA[4] 20% 하이브리드 박막에서 생성된 기공의 구조가 매우 연결된 상태이기 때문에 초기에 포로젠이 분해되었을 때, 분해된 분자조각들이 쉽게 박막 외부로 빠져나올 수 있기 때문이라고 생각된다.

The Blue and Red Luminescences from Ambient Air Aged Porous Silicon

  • Chang, S.S;Yoon, S.O;Choi, G.J;Kawakami, Y;Sakai, A
    • The Korean Journal of Ceramics
    • /
    • 제4권1호
    • /
    • pp.28-32
    • /
    • 1998
  • This paper reports on photoluminescence (PL), luminescence decay curves, and compositional analysis of porous silicon(PS) which is aged under air ambient by Fourier transform infrared vibrational spectroscopy (FTIR) and by Auger electron spectroscopy (AES). Porous silicos which has been aged under air ambient yields two PL band structures, i.e. blue/violet PL and red PL. The evolution of a blue/violet band is pronounced, especially for thin PS film which is prepared in dilute HF solution. The blue/violet PL band has been observed initially to increrase rapidly with aging, then saturated with further atmospheric aging. The ambient air aged PS exhibits a fast decay time of sub-nanosecond at room temperature and shows appreciably faster decay time than that at 20K. Atmospheric aging of this thin blue/violet luminescing PS yield non-stoichiometric oxide judging from the vibrational spectra of Si-O and AES analysis.

  • PDF

YSZ 박막의 성장속도와 특성에 미치는 전기화학증착의 조건의 영향(II) (Influences of Electrochemical Vapor Deposition Conditions on Growth Rate ad Characteristics of YSZ Thin films(II))

  • 박동원;전치훈;김대룡
    • 한국세라믹학회지
    • /
    • 제33권3호
    • /
    • pp.355-361
    • /
    • 1996
  • Yttria stabilized zirconia (YSZ) thin films were prepared by the electrochemical vapor deposition (EVD) method on the porous Al2O3 substrates. Y2O3 mol% of thin film was linearly increased with yttrium mole fraction of vapor phase. As yttrium mole fraction(Zyc13=0.18) increased dense and faceted thin films were enhanced. However as the yttrium mole fraction (Zyc13=0.04) decreased porous thin films with monoclinnic phase prevailed. With increasing pressure difference of substrate sides penetration depth decreased porosity and amount of monoclinic phase in the films increased.

  • PDF

Spin-coating법에 의한 $TiO_2$의 광촉매 효율 (Photocatalytic Efficiency of $TiO_2$Thin Films by Spin-coating)

  • 김범준;변동진;이중기;박달근
    • 한국재료학회지
    • /
    • 제10권4호
    • /
    • pp.264-269
    • /
    • 2000
  • $TiO_2$sol(30wt%, anatase)을 이용하여 스핀코팅으로 유리기판에 $TiO_2$박막을 제조하였다. 박막의 두께는 코팅주기의 횟수가 조절하였다. 한 코팅주기는 스핀코팅, 건조, 열처리를 포함한다. 박막의 반응성은 막 위에서의 자외선강도가 0.44와 2.mW/$\textrm{cm}^2$인 조건에서 벤젠기체의 광분해 속도를 통해 조사하였다. 박막의 두께가 증가할수록 표면적으로 증가로 인해 반응성은 증가하였으며, 0.44mW/$\textrm{cm}^2$일 때 4$\mu\textrm{m}$정도 이상의 두께에서 반응성은 더 이상 증가되지 않았다. porous한 $TiO_2$박막은 비교적 넓은 유효표면적을 가지고 있으며, 그것은 비교적 높은 자외선 강도하에서 박막두께에 따라 반응속도를 증가시키는 결과를 낳았다.

  • PDF

Light emitting thin film structures based on organic luminophors embedded in porous alumina matrixes

  • Gorokh, G.G.;Labunov, V.A.;Smirnov, A.G.;Kukhta, A.V.
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2002년도 International Meeting on Information Display
    • /
    • pp.315-318
    • /
    • 2002
  • Light emitting thin film structures based on organic luminophors embedded in porous alumina matrixes are discussing. The optical properties of the luminophors in a matrix differ greatly from their properties in usual crystalline state or in a solution and they depend on the concentration of luminophors molecules of up to 10-2 mol/l. Successful experiments on filling of pores with organic luminophors and the investigation of their luminescent and optical properties were carried out.

  • PDF

Electrospray를 통한 전도성 박막의 제조 (Preparation of Conductive $TiO_2$ thin film by Electrospray Depositon)

  • 이경화;김한성
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
    • /
    • pp.381-382
    • /
    • 2008
  • $TiO_2$ colloidal solution was electrosprayed for preparing a conductive thin film with high quality. Electrospray is a technique of liquid dispersion electrically and a good method of manufacturing nanoparticle, nanofiber, porous membrane, film preparation and coating. Water and ethanol were used as solvents and their mixing ratio was varied for studying the influence of solvent volatile on nanoparticle dispersion. Various nozzles to control the thru-put of solutions.were examined. Integrated analytical method and scanning electron microscope were used to analyze integrity and microscopic images.

  • PDF

PVC-THF 용액에 비용매 첨가에 따른 PVC 박막의 표면 특성 분석 (Analysis of Surface Properties of PVC Thin Film according to Addition of Non-solvent to PVC-THF Solution)

  • 이승규;문제철;이원규
    • 공업화학
    • /
    • 제33권4호
    • /
    • pp.367-372
    • /
    • 2022
  • 폴리염화비닐(polyvinylchloride, PVC)-tetrahydrofuran (THF) 용액에 PVC 비용매의 첨가와 박막 건조 공정이 PVC 박막에 미치는 영향을 분석하였다. 사용된 비용매는 알코올과 비알코올계로 구성되었으며, 첨가에 따른 PVC 박막의 표면 거칠기와 표면 형상의 차별성에 따른 소수성 성질을 비교하였다. PVC-THF 용액 제조과정에 발생하는 용액 내 기포 함유가 박막의 표면 구조에 미치는 영향이 큼을 확인하였다. 상대적인 고농도 PVC-THF 용액에서 코팅 박막의 정상적 표면 물성을 구현하기 위하여 적절한 박막 건조법의 선택이 요구된다. 알코올계 비용매를 첨가할 경우 과립형 형상의 다공성 표면을 갖는 PVC 박막이 얻어져 초소수성 특성을 보인다. 비용매에 대한 PVC-THF 용액의 부피 비는 코팅 박막의 표면 형상에 영향을 주며, 비용매 첨가량이 많을수록 초소수성 PVC 박막을 형성하는 데 유리하다.

형광 나노 포러스 박막을 이용한 표면 온도 센서의 제작 및 성능 연구 I (Fabrication and Performance Investigation of Surface Temperature Sensor Using Fluorescent Nanoporous Thin Film I)

  • 김현정;유재석;박진일
    • 설비공학논문집
    • /
    • 제25권12호
    • /
    • pp.668-673
    • /
    • 2013
  • In this study, specimens with nano-sized porous thin films were manufactured by injecting fluorescence solution into the pores. We intended to find out the difference of the fluorescence intensity in each region of the specimen through an experimental apparatus that makes a temperature field. Before conducting experiments, the optimized manufacturing conditions were determined by analysis of all parameters that influence the emission intensity, and the experiments were carried out with the specimens produced in the optimized conditions. Then, the calibration curves of the fluorescence intensity versus temperature were performed by taking the intensity distributions from the specimen in various temperature fields. The surfaces of specimens were coated with Rhodamine-B (Rh-B) fluorescent dye and measured based on the fluorescence intensity. Silica (SiO2) nanoporous structure with 1-um thickness was constructed on a cover glass, and fluorescence dye was absorbed into these porous thin films.

전기증착법으로 제조된 WO3 박막의 광촉매 특성 (Photocatalytic Properties of WO3 Thin Films Prepared by Electrodeposition Method)

  • 강광모;정지혜;이가인;임재민;천현정;김덕현;나윤채
    • 한국분말재료학회지
    • /
    • 제26권1호
    • /
    • pp.40-44
    • /
    • 2019
  • Tungsten trioxide ($WO_3$) is a promising candidate as a photocatalyst because of its outstanding electrical and optical properties. In this study, we prepare $WO_3$ thin films by electrodeposition and characterize the photocatalytic degradation of methylene blue using these films. Depending on the voltage conditions (static and pulse), compact and porous $WO_3$ films are fabricated on a transparent ITO/glass substrate. The morphology and crystal structure of electrodeposited $WO_3$ thin films are investigated by scanning electron microscopy, atomic force microscopy, and X-ray diffraction. An application of static voltage during electrodeposition yields a compact layer of $WO_3$, whereas a highly porous morphology with nanoflakes is produced by a pulse voltage process. Compared to the compact film, the porous $WO_3$ thin film shows better photocatalytic activities. Furthermore, a much higher reaction rate of degradation of methylene blue can be achieved after post-annealing of $WO_3$ thin films.

동결건조공정을 이용한 다공성 세라믹스의 미세구조 제어 (Microstructure Control of Porous Ceramics by Freeze-Drying of Aqueous Slurry)

  • 황해진;문지웅
    • 한국세라믹학회지
    • /
    • 제41권3호
    • /
    • pp.229-234
    • /
    • 2004
  • 수계슬러리의 동결건조 공정을 이용하여 배향성 기공을 갖는 NiO-YSZ 지지체를 제조하였다. 슬러리의 동결과정에서 형성된 얼음 결정은 진공건조 과정을 거치면서 승화되어 그 자리에 기공을 형성하였으며. 열전달 방향과 속도를 조절함으로써 얼음결정의 성장을 제어할 수 있음을 알 수 있었다. 제조된 NiO-YSZ 지지체는 배향성을 가진 거대(macro) 기공과 함께 표면에는 미세기공이 존재하는 독특한 기공구조를 형성하였다. 이것은 동결과정에 있어서 성형체의 위치에 따라 얼음의 성장속도가 다르기 때문에 발생하는 현상으로 생각된다. 얻어진 다공체 표면에 YSZ 슬러리를 dip 코팅하여 막을 형성한 후 140$0^{\circ}C$에서 동시소성(co-firing)하여 다공성 NiO-YSZ 지지체의 표면에 치밀한 YSZ 막이 코팅된 bilayer 제조에 성공하였다.