• Archives of Plastic Surgery
• /
• v.37 no.4
• /
• pp.400-408
• /
• 2010

Purpose: Complete septal extension grafts have been widely used in rhinoplasty for effective projection of the short retruded columella in Asian patients. Autologous septal cartilages and porous high-density polyethylene sheets are frequently used as septal extension grafts. This study was conducted to compare the postoperative results of porous polyethylene sheets and septal cartilages used for correction of unilateral cleft lip nasal deformities by using photogrammetric analysis. Methods: This study investigated a total of 49 patients with cleft lip nasal deformities who underwent corrective surgery, and were followed up for at least 6 months. Septal cartilages were used in 39 patients, and porous polyethylene sheets were used in 10 patients. In all patients, through the open rhinoplasty, complete septal extension grafts were sutured to the caudal margin of the septal cartilage, and the alar cartilage was sutured with suspension. The cleft side alar cartilage was overcorrected by approximately 3 - 5 mm. Postoperative outcomes were evaluated by using photogrammetric analysis. Five indices and 4 angles were measured on their photographs taken before and after the surgery. In patients with unilateral cleft lip nasal deformities, symmetry was also evaluated by means of columellar length index. Results: The postoperative values obtained in photogrammetric analysis showed improvements in comparison with the preoperative ones. The polyethylene group produced more improved outcomes than the septal cartilage group but also resulted in more complications at the same time. Conclusion: The results of this study indicates that complete septal extension grafts are efficient for the correction of unilateral cleft lip nasal deformities. However, since postoperative complications occur more frequently in the polyethylene group than in the septal cartilage group, caution is advised in using porous high-density polyethylene sheets in patients with cleft lip nasal deformities.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.44 no.3
• /
• pp.128-135
• /
• 2018

Objectives: The role of alloplastic materials in maxillofacial reconstruction is still controversial. Determining the utility of porous, high-density, polyethylene implants as a highly stable and flexible, porous alloplast, with properties such as rapid vascularization and tissue ingrowth, is crucial in cases of maxillofacial deformities and aesthetic surgery. Materials and Methods: Thirty high-density porous polyethylene implants were implanted in 16 patients that had been referred to a private office over a three-year period. These implants were used for correcting congenital deformities, posttraumatic defects and improving the aesthetic in nasal, paranasal, malar, chin, mandibular angle, body and orbital areas. Results: The outcomes of the cases in this study showed good aesthetic and functional results. The majority of patients had no signs of discomfort, rejection or exposure. Two implants suffered complications: a complicated malar implant was managed by antibiotic therapy, and an infected mandibular angle implant was removed despite antibiotic therapy. Conclusion: Based on the results, the Medpor implant seems to be an excellent biomaterial for correcting various facial deformities. Advantages include its versatility and relatively ideal pore size that allows for excellent soft tissue ingrowth and coverage. It is strong, flexible and easy to shape.

• Macromolecular Research
• /
• v.14 no.4
• /
• pp.430-437
• /
• 2006

The ultra-drawing process of an ultra high molecular weight polyethylene (UHMWPE) gel film was examined by incorporating linear low-density polyethylene (LLDPE) and $BaTiO_3$ nanoparticles. The effects of LLDPE and the draw ratios on the morphological development and mechanical properties of the nanocomposite membrane systems were investigated. By incorporating $BaTiO_3$ nanoparticles in the UHMWPE/LLDPE blend systems, the ultra-drawing process provided a highly extended, fibril structure of UHMWPE chains to form highly porous, composite membranes with well-dispersed nanoparticles. The ultra-drawing process of UHMWPE/LLDPE dry-gel films desirably dispersed the highly loaded $BaTiO_3$ nanoparticles in the porous membrane, which could be used to form multi-layered structures for electronic applications in various embedded, printed circuit board (PCB) systems.

• Archives of Plastic Surgery
• /
• v.35 no.4
• /
• pp.431-438
• /
• 2008

Purpose: The common deformity after the correction of unilateral cleft lip nasal deformity is nasal asymmetry, and it is caused by the hypoplasia of the pyriform aperture. To correct this, many procedures have been applied, but still many problems are present. Authors performed the inlay and onlay insertion of porous high density polyethylene sheet(1 mm thickness $Medpor{(R)}$ sheet) in the hypoplastic pyriform margin of cleft side and obtained satisfactory results. Methods: 11 cases were performed and the mean follow up period was 15.1 months. Their mean age was 23.6 years. Under general anesthesia, bilateral pyriform margin was exposed. $Medpor{(R)}$ sheets in "match stick" like shaped were inlay inserted, and kidney shaped were onlay inserted fixating with two 6 mm titanium screws. After the surgery, the results was evaluated by photogrammetric analysis. On the basal view, the distance from the subalare and labiale superius' to the transverse baseline connecting the both cheilions was measured from the cleft side and the non-cleft side. Then, the postoperative symmetry was assessed by obtaining the cleft side against the non-cleft side as proportion index, defined as lateral and medial upper lip contour index. Results: There were 2 infections. The cause was because the inserted implant was too long and thus protruded to the base of nasal cavity. The lateral upper lip contour index was from 95.49 to 103.27, and medial upper lip contour index was from 90.92 to 100.49, it was statistically increased, and thus the symmetry was improved. However clinically mild depression remained at nostril floor. Conclusion: Authors performed porous high density polyethylene sheet inlay and onlay insertion for the hypoplasia of the pyriform margin in unilateral cleft lip nasal deformity. It was found that depressed pyriform margin and upper lip were corrected effectively except for the nostril floor, for which an additional soft tissue augmentation would be necessary. The inlay insertion has risk of protrusion, thus the guideline of the use of artificial prosthesis should be observed strictly.

• Analytical Science and Technology
• /
• v.33 no.3
• /
• pp.159-166
• /
• 2020

Vacuum metal deposition (VMD) is effective to develop latent fingerprints on non-porous and semi-porous surfaces. VMD can be used in cases when fingerprints that can not be developed by generalized techniques or deposited on difficult surfaces. The recommended surfaces for VMD techniques include vinyl, polymer bills, magnetic coated tickets, etc. In this study, the minimum amount of gold input was explored for developing fingerprints from at least 12 hours to up to 28 days after deposit fingerprint on the pink high density polyethylene envelope (HDPE) and low density polyethylene envelope (LDPE), which are mainly used as delivery envelopes. And the results were compared with the effects of black powder and fluorescent powder. In addition, delivery envelopes used for delivery were collected, then classified as HDPE and LDPE and pseudo-operation test was performed. As a result, VMD method developed good quality of fingerprints.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.21 no.1
• /
• pp.60-64
• /
• 1999

Recently, for the reconstruction of bony defect and cosmetic improvement, many graft materials and implants have been widely used in the various surgical situations. The alloplastic materials have many advantages such as simplicity of operation, no additional need of surgery, and easy manipulation. The $Medpor^{TM}$(porous high-density polyethylene, Porex Co., USA) was initially studied in 1972 for surgical implant and introduced as an implant material for oral and maxillofacial region by Sauer and King in 1988. This material permits full ingrowth of bone into the implants, substantially increasing the implant's incorporation into the recipient site. It can be shaved during the surgery, which results in an improvement and prefabricated various size and shapes to fit into the surgical defect. The $Medpor^{TM}$ was used in 32 patients from 1995 to 1997 at the maxillofacial region. It was used for paranasal augmentation in 24 cases, for malar augmentation in 2 cases, for infraorbital augmentation in 2 cases, for mandibular angle augmentation in 2 cases, for mandibular body augmentation in 2 cases, for chin vertical augmentation in 1 case. It was mainly fixed with miniplate or screw. There were few complications except one infection and one exposure of the implant.

• Membrane Journal
• /
• v.20 no.2
• /
• pp.151-158
• /
• 2010

This paper presents the synthesis of ampholyte immobilized hollow-fiber membranes and adsorption characteristic of metallic ions. This is prepared by radiation induced grafting polymerization of an epoxy group containing Glycidyl methacrylate (GMA) onto an existing polyethylene porous hollow-fiber membrane. Ampholyte ion-exchanged alkalic group, $-NH_2$ (amine function) of Taurine (TAU) is reacted with glycidyl of GMA for the synthesis of stable membrane. However, Sodium sulfite (SS) membrane is also prepared by making chemical bonds with GMA of porous hollow-fiber membrane for the comparison of adsorption characteristic of metallic ions. These are called as TAU and SS membranes, respectively. It is shown that TAU membrane shows a steady flux, 0.9 m/h regardless of the density of TAU, while the flux of SS membrane decreases rapidly as the density of $SO_3H$ group increases. SS membrane showed a negligible flux. TAU membrane with the density 0.8 mmol/g shows the amount of metallic ions adsorbed in the following order, Cu > Cd > Mg > Sb > Pb. In general, TAU membrane with high density and reaction time showed the high amount of metallic ions adsorbed and flux.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.27 no.2
• /
• pp.55-62
• /
• 2021

This study aims to reduce the rancid odor generated during the fermentation process of kimchi by inserting zinc oxide (ZnO) into an inorganic porous material with a high surface area to decompose or adsorb the fermentation odor. ZnO activated by the presence of moisture exhibits decomposition of rancid odors. Mixed with Titanium dioxide (TiO₂), a photocatalyst. To manufacture the packaging liner used in this study, NaOH, ZnCl₂, and TiO₂ powder were placed in a tank with diatomite and water. The sludge obtained via a hydrothermal ultrasonication synthesis was sintered in an oven. After being pin-milled and melt-blended, the powders were mixed with linear low-density polyethylene (L-LDPE) to make a masterbatch (M/B), which was further used to manufacture liners. A gas detector (GasTiger 2000) was used to investigate the total amount of sulfur compounds during fermentation and determine the reduction rate of the odor-causing compounds. The packaging liner cross-section and surface were investigated using a scanning electron microscope-energy dispersive X-ray spectrometer (SEM-EDS) to observe the adsorption of sulfur compounds. A variety of sulfur compounds associated with the perceived unpleasant odor of kimchi were analyzed using gas chromatography-mass spectrometry (GC-MS). For the analyses, kimchi was homogenized at room temperature and divided into several sample dishes. The performance of the liner was evaluated by comparing the total area of the GC-MS signals of major off-flavor sulfur compounds during the five days of fermentation at 20℃. As a result, Nano-grade inorganic compound liners reduced the sulfur content by 67 % on average, compared to ordinary polyethylene (PE) foam liners. Afterwards SEM-EDS was used to analyze the sulfur content adsorbed by the liners. The findings of this study strongly suggest that decomposition and adsorption of the odor-generating compounds occur more effectively in the newly-developed inorganic nanocomposite liners.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.18 no.2
• /
• pp.177-183
• /
• 1996

With the increasing esthetic requirement in orthognathic surgeries, midfacial corrective surgeries were developed to improve the paranasal depression. Augmentation with autogenous bones has long been the standard in facial reconstruction, however limited graft availability, donor site morbidity, and difficulties in 3-dimensional shaping were led to limited use. Porous high density polyethylene$(Medpor{(R)})$ was introduced in the 1970s as an alloplastic implants. It can be used in various size and shapes, and shortend operation time. The purpose of this study is to determine, by means of cephalometrics, the degree of long term stability and gaining of the overlying soft tissue thickness. The results were as followings : 1. There was no evidence of foreign body reaction, infection, and tissue necrosis. 2. $(Medpor{(R)})$ implants had an advantage of clinical use ; easy to contour and adapt to obtain a precise 3-dimensional construction. 3. Cephalometric study of 16 cases of paranasal augmentation revealed an overall increase of soft tissue thickness of approximately 82.1% in 6-months following. 4. The successful results could be obtained under the aseptic handling.