• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제21권1호
• /
• pp.60-64
• /
• 1999

Recently, for the reconstruction of bony defect and cosmetic improvement, many graft materials and implants have been widely used in the various surgical situations. The alloplastic materials have many advantages such as simplicity of operation, no additional need of surgery, and easy manipulation. The $Medpor^{TM}$(porous high-density polyethylene, Porex Co., USA) was initially studied in 1972 for surgical implant and introduced as an implant material for oral and maxillofacial region by Sauer and King in 1988. This material permits full ingrowth of bone into the implants, substantially increasing the implant's incorporation into the recipient site. It can be shaved during the surgery, which results in an improvement and prefabricated various size and shapes to fit into the surgical defect. The $Medpor^{TM}$ was used in 32 patients from 1995 to 1997 at the maxillofacial region. It was used for paranasal augmentation in 24 cases, for malar augmentation in 2 cases, for infraorbital augmentation in 2 cases, for mandibular angle augmentation in 2 cases, for mandibular body augmentation in 2 cases, for chin vertical augmentation in 1 case. It was mainly fixed with miniplate or screw. There were few complications except one infection and one exposure of the implant.

• Steel and Composite Structures
• /
• 제50권2호
• /
• pp.201-216
• /
• 2024

This paper is motivated by the lack of studies relating to vibration and nonlinear resonance of fluid-conveying cantilever porous GPLR pipes with fractional viscoelastic model resting on nonlinear foundations. A dynamical model of cantilever porous Graphene Platelet Reinforced (GPLR) pipes conveying fluid and resting on nonlinear foundation is proposed, and the vibration, natural frequencies and primary resonant of such system are explored. The pipe body is considered to be composed of GPLR viscoelastic polymeric pipe with porosity in which Halpin-Tsai scheme in conjunction with fractional viscoelastic model is used to govern the construction relation of the nanocomposite pipe. Three different porosity distributions through the pipe thickness are introduced. The harmonic concentrated force is also applied on pipe and excitation frequency is close to the first natural frequency. The governing equation for transverse motion of the pipe is derived by the Hamilton principle and then discretized by the Galerkin procedure. In order to obtain the frequency-response equation, the differential equation is solved with the assumption of small displacement, damping coefficient, and excitation amplitude by the multiple scale method. A parametric sensitivity analysis is carried out to reveal the influence of different parameters, such as nanocomposite pipe properties, fluid velocity and nonlinear viscoelastic foundation coefficients, on the primary resonance and linear natural frequency. Results indicate that the GPLs weight fraction porosity coefficient, fractional derivative order and the retardation time have substantial influences on the dynamic response of the system.

• 한국세라믹학회지
• /
• 제49권4호
• /
• pp.363-368
• /
• 2012

Nitriding and post-sintering behavior of powder mixture compacts were investigated. As mixture compacts are different from simple Si compacts, the fabrication of a sintered body with a mixture composition has engineering implications. In this research, in specimens without a pore former, the extent of nitridation increased with $Si_3N_4$ content, while the highest extent of nitridation was measured in $Si_3N_4$-free composition when a pore former was added. Large pores made from the thermal decomposition of the pore former collapsed, and they were filled with a reaction product, reaction-bonded silicon nitride (RBSN) in the $Si_3N_4$-free specimen. On the other hand, pores from the decomposed pore former were retained in the $Si_3N_4$-added specimen. Introduction of small $Si_3N_4$ particles ($d_{50}=0.3{\mu}m$) into a powder compact consisting of large silicon particles ($d_{50}=7{\mu}m$) promoted close packing in the green body compact, and resulted in a stable strut structure after decomposition of the pore former. The local packing density of the strut structure depends on silicon to $Si_3N_4$ size ratio and affected both nitriding reaction kinetics and microstructure in the post-sintered body.

• Biomaterials and Biomechanics in Bioengineering
• /
• 제1권1호
• /
• pp.51-62
• /
• 2014

The purpose of this experiment was to evaluate the apatite-formation abilities of low-modulus Ti-7.5Mo substrates treated with NaOH aqueous solutions and subsequent ethyl alcohol aging before soaking them in simulated body fluid. Specimens of Ti-7.5Mo were initially treated with 5 M NaOH at $60^{\circ}C$ for 24 h, resulting in the formation of a porous network structure composed of sodium hydrogen titanate. Afterwards, the specimens were aged in ethyl alcohol at $60^{\circ}C$ for 5 or 10 min, and subsequently immersed in simulated body fluid at $37^{\circ}C$ for 3, 7 and 14 days. Ethyl alcohol aging significantly increased the apatite-forming abilities of Ti-7.5Mo. The amount of apatite deposited on the Ti-7.5Mo after NaOH treatment and subsequent ethyl alcohol aging was much greater, especially after the Ti-7.5Mo specimens were aged for 5 min. Due to its excellent combination of bioactivity, low elastic modulus and low processing costs, the Ti-7.5Mo treated with NaOH aqueous solutions and subsequently aged in ethyl alcohol has promising heavy load-bearing applications.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 추계학술대회 논문집
• /
• pp.291-291
• /
• 2013

The interior vehicle noise due to the exterior aerodynamic field is an important topic in the acoustic design of a car. The air flow detached from the A-pillar and impacting the side windows are of particular interest as they are located close to the driver / passenger and provides a lower insulation index than the trimmed car body parts. HMC is interested in the numerical prediction of this aerodynamic noise generated by the car windows with the final objective of improving the products design and reducing this noise. The methodology proposed in this paper relies on two steps: the first step involves the computation of the exterior flow and turbulence induced non-linear acoustic field using the CAA(Computational aeroacoustics) solver CAA++. The second step consists in the computation of the vibro-acoustic transmission through the side window using the finite element vibro-acoustic solver Actran. The internal air cavity including trim component are included in the simulation. In order to validate the numerical process, an experimental set-up has been created based on a generic car shape. The car body includes the windshield and two side windows. The body is made of aluminum and trimmed with porous layers. First, this paper describes the method including the CAA and the vibro-acoustic models, from the boundary conditions to the different components involved, like the windows, the trims and the car cavity is detailed. In a second step, the experimental set-up is described. In the last part, the vibration of the windshield and windows, the total wind noise level results and the relative contributions of the different windows are then presented and compared to measurements. The influence of the flow yaw angle (different wind orientation) is also assessed.

• 철학연구
• /
• 제123호
• /
• pp.137-185
• /
• 2018

여성혐오를 넘어서기 위해서는 여성이라는 존재론적 차원의 물질성과 현실성을 기각시키거나 저항의 단위소를 무화시키는 것이 아닌, 성별 불평등구조에서 지배계급성을 구성하고 있는 남성성의 작동 메커니즘에 대한 치밀한 분석과 해체로 나아가야 한다. 이를 위해 필자는 첫 번째로 남근질서라는 아버지의 법질서에서 팔루스와 페니스 간의 유착성-팔루스가 초월적이며 절대적 심급이 아닌 스스로 축소되고 사라져버리는 페니스의 유약성에 참조점을 두고 있는 내재적 결핍성의 지점임을 이론적으로 추적해나감으로써 남근질서의 해체가능성을 모색해보고자 한다. 두 번째로 남성지배의 축 중 하나인 페니스 나르시시즘이라는 개인적 정체성화의 작동방식을 분석해보고자 한다. 여기서 페니스는 해부학적 기관에 그치는 것이 아니라 자기애의 온전성을 담지받는 장소이자 아버지의 법질서의 사회문화적 권위와 권력의 계승점을 나타내는 것이다. 즉 남성은 자신의 페니스를 중심으로 페니스 나르시시즘이라는 개인으로서의 남성의 정체성화 양식을 구성해나가고 있으며, 사회문화적으로는 방기하는 몸이라는 권력적 몸, 특권적 몸을 양산하는 것이다. 세 번째로 남성지배의 또 다른 축인 페니스 카르텔이라는 집단적 정체성화의 메커니즘은 남성들의 본래적 우월성의 상호확인에서만이 아니라, 남성들의 자기 완결성의 결여, 무능력함과 형편없음, 비리 축적을 상호 묵인함으로써 더욱 더 강력하게 작동하는 것이다. 왜냐하면 남성 특권구조란 특정한 남성 개개인에게 독점되는 양태가 아니라, 남성이라는 성별 계급으로 범주화된 이들이 의식적, 무의식적으로 나눠가지는 지배적 집합성에서 기인하는 것이기 때문이다. 이러한 페니스 나르시시즘과 페니스 카르텔을 해체하기 위해서 페니스가 자기완결적이며 불침투적인 닫힌 몸이 아님을 드러내어야 한다. 즉 페니스는 사정기관과 배설 기관이라는 다공성의 일체화 구조를 통해 구멍 지어진 몸이자 숭고와 비천, 깨끗함과 더러움 등의 분열적 지점이라 할 수 있다. 또한 우뚝 솟은 불변의 공격성과 능동성, 힘과 권위의 기관이 아닌, 시시각각 형태가 변하는 유동적 살로서의 페니스와 팔루스-기관의 유약성을 연동시켜 사유해봄으로써 페니스 카르텔의 남근다발이 한데 묶일 수조차 없는 결핍성의 지대임을 논증하고자 한다. 남근 이데올로기론이 갖는 임계점을 이론적으로 살펴봄으로써, 폭압적 남성성의 재생산 고리를 끊어내어 여성혐오를 극복해보고자 한다.

• 한국어병학회지
• /
• 제28권2호
• /
• pp.79-85
• /
• 2015

동해안에서 어획된 청자갈치 (Bothrocara hollandi)의 체측 근육에 유백색의 불투명한 시스트를 형성하고 있는 점액포자충이 발견되었다. 시스트를 마쇄하여 광학현미경으로 관찰해본 결과, 원형에 가까운 점액포자충의 성숙 포자가 관찰되었다. 성숙 포자의 평균 길이는 $11.9(11.0{\sim}13.5){\mu}m$, 평균 폭은 $11.6(10.7{\sim}13.6){\mu}m$, 평균 두께는 $7.8(6.9{\sim}8.8){\mu}m$이었다. 극낭의 평균 길이는 $4.4(3.2{\sim}5.3){\mu}m$이었으며, 평균 폭은 평균 $3.3(2.4{\sim}4.2){\mu}m$이었다. 감염숙주와 성숙포자의 형태학적 특징, 각 부위의 측정값으로부터 본 연구에서 발견된 점액포자충은 Myxobolus aeglefini Auerbach 1906으로 동정하였다. 또한 18S rDNA sequences를 이용한 계통분석 결과 M. albi와 M. groenlandicus와 같은 분지에 속하는 것이 확인되었으며 각각 97.7%와 96.9%의 상동성을 나타내었다.

• 제어로봇시스템학회논문지
• /
• 제11권7호
• /
• pp.578-586
• /
• 2005

Air mattress is now used widely to prevent the pressure ulcer by reducing the localized pressure peaks. The pressure control method based on the anthrophometric model of an air-cell mattress developed in this study is presented. The air-cell mattress has 18 cylindrical air cells made of porous material allowing air leakage. Even though the air leakage can contribute to reducing the development of pressure ulcer by lowering the pressure peak, temperature and humidity, the air pressure changes with time and the desired air-cell pressure has to be determined as an optimal value for each user. To select the desired air-cell pressure, we first divide the parts of the body into four sections such as head, trunk, hip, and leg. Then, the pressure of each section grouped with air-cells is calculated from the weight of each part estimated from the individual height and body weight. Air supply system for the air-cell mattress is implemented by using four electronic solenoid valves and an air compressor, and it is driven by a real-time microcontroller. We experimented with five subjects of the contact pressure on skin. The experimental results show that the proposed air-cell mattress is effective for the prevention of the pressure ulcer.

• 대한의용생체공학회:의공학회지
• /
• 제25권1호
• /
• pp.1-4
• /
• 2004

조직공학은 생명과학, 의학, 공학의 기본개념 및 기술을 바탕으로 생체조직을 대체할 수 있는 인공조직 및 장기를 제작하여 이식함으로써 생체의 기능을 유지, 향상 또는 복원하는 것을 목표로 하는데 여기에 사용되는 기본 재료가 장기나 조직의 형태를 만들도록 돕는 scaffold이다. Scaffold를 만드는데 있어서 Solvent-casting과 Particulate leaching 기법은 다공성 폴리머 scaffold의 제조에서 널리 쓰이는 방법인데 여기 쓰이는 particle에는 소금과 젤라틴 둥이 사용되고 있다. 소금은 얻기가 쉽고 다루기에도 편리하다는 장점 때문에 가장 일반적으로 사용되고 있으며 젤라틴은 소금에 비하여 세포의 초기 접착과 증식에 유리하다는 이유로 최근에 많이 사용되고 있으나 이에 관한 비교실험은 아직 보고 된 바 없다. 본 연구에서는 소금과 젤라틴으로 만들어진 두 가지 scaffold를 비교해 보았으며 그 결과 젤라틴 scaffold가 초기상태의 세포 접합과 증식에 있어서 좋은 결과를 보였고 같은 공극율일 때 공극의 연결 상태가 훨씬 더 우수한 결과를 보였다.

• 한국입자에어로졸학회지
• /
• 제6권4호
• /
• pp.173-183
• /
• 2010

The high temperature pleated filter bags which were used during this study were made of pleated nonwoven fabric of heat and acid resistant polysulfonate fibers which can withstand the heat up to $300^{\circ}C$ and have a filtration area which is 3 to 5 times larger than the conventional round filter bags. Cartridge module packed with 3 kind of the sulfur impregnated activated-carbon based sorbents were inserted in the inner of the pleated filter bag. This type of pleated filter bag was designed to remove not only the particulate matter but also the gaseous elemental mercury. The electrostatic precipitator part can enhance the particulate removal efficiency and reduce the pressure drop of the pleated filter bag by agglomerated particles to form a more porous dust layer on the surface of the pleated bag which is increased the filter bag cleaning efficiency. In addition, the most of particles are separated from the flue gas stream through the cyclone and the electrostatic precipitator part which were installed at the lower part and main body part of the convergence particulate collector, respectively. Thus reduce particulate loading of the high temperature pleated filter bags were applied in this study to analyze the removal characteristics of particulate matter and gaseous elemental mercury.