• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 춘계학술발표대회 논문집
• /
• pp.184-187
• /
• 2003

Complete prediction of second order permeability tensor for three dimensional circular braided preform is critical to understand the resin transfer molding process of composites. The permeability can be predicted by considering resin flow through the multi-axial fiber structure. In this study, permeability tensor for a 3-D circular braided preform is calculated by solving a boundary problem of a periodic unit cell. Flow field through the unit cell is obtained by using a 3-D finite volume method (FVM) and Darcy's law is utilized to obtain permeability tensor. Flow analysis for two cases that a fiber tow is regarded as impermeable solid and permeable porous medium is carried out respectively. It is found that the flow within the intra-tow region of the braided preform is negligible if inter-tow porosity is relatively high but the flow through the tow must be considered when the porosity is low. To avoid checkerboard pressure field and improve the efficiency of numerical computation, a new interpolation function for velocity variation is proposed on the basis of analytic solutions. Permeability of the braided preform is measured through a radial flow experiment and compared with the permeability predicted numerically.

• 한국전산유체공학회지
• /
• 제17권4호
• /
• pp.41-48
• /
• 2012

A numerical analysis of thermal stratification in the upper plenum of the MONJU fast breeder reactor was performed. Calculations were performed for a 1/6 simplified model of the MONJU reactor using the commercial code, CFX-13. To better resolve the geometrically complex upper core structure of the MONJU reactor, the porous media approach was adopted for the simulation. First, a steady state solution was obtained and the transient solutions were then obtained for the turbine trip test conducted in December 1995. The time dependent inlet conditions for the mass flow rate and temperature were provided by JAEA. Good agreement with the experimental data was observed for steady state solution. The numerical solution of the transient analysis shows the formation of thermal stratification within the upper plenum of the reactor vessel during the turbine trip test. The temporal variations of temperature were predicted accurately by the present method in the initial rapid coastdown period (~300 seconds). However, transient numerical solutions show a faster thermal mixing than that observed in the experiment after the initial coastdown period. A nearly homogenization of the temperature field in the upper plenum is predicted after about 900 seconds, which is a much shorter-term thermal stratification than the experimental data indicates. This discrepancy is due to the shortcoming of the turbulence models available in the CFX-13 code for a natural convection flow with thermal stratification.

• 한국물환경학회지
• /
• 제20권6호
• /
• pp.664-669
• /
• 2004

An upflow BAF(Biological Aerated Filter) equipped with an expanded clay media was applied to reuse weaving wastewater of water jet loom. The performance of lab-scale biofilter was investigated by the adjustment of EBCTs(Empty Bed Contact Time) and the packing ratio of media, which were changed 1.1 to 3.7hr and 38 to 63%, respectively. In most conditions except 1.1hr of EBCT, BOD, CODcr, SS and Turbidity of the effluent were 1~4mg/L, 7~16mg/L, 1~5mg/L and 5~14NTU, where their removal efficiencies were 76~95%, 82~93%, 63~94% and 59~81%, respectively. From the observation of SEM(Scanning Electron Microscope) photographs of porous clay media, it was revealed that this media provided good performance of retaining microbes effectively. In addition, $0.44~0.49kgVSS/kgBOD_{rem}$. of low sludge reduction was expected. The most efficient back washing cycle and procedure were once per 4 to 9 days and air including collapse-pulsing method, respectively. Therefore, this system can be of use as an weaving wastewater treatment for reuse.

• Nuclear Engineering and Technology
• /
• 제29권4호
• /
• pp.320-326
• /
• 1997

The nuclide transport in the one-dimensional porous medium is considered as a first step in developing a decay chain transport in multidimensional inhomogeneous media. A method of solving conventional advection-dispersion equation with decay chain of arbitrary length by using the method of characteristics (MOC) is introduced. In specific cases where the advection are dominant rather than dispersion, the method is known to be useful : one of the most distinctive advantages in applying the model is that the MU minimizes the numerical dispersion, which is distinguished in such common numerical schemes as finite element method and finite difference method. The suggested model is considered to be effective through several illustrations for the case that decay chain of arbitrary length is involved during transport which is difficult to solve by standard numerical solutions if the medium becomes more complicated.

• 방사성폐기물학회지
• /
• 제4권1호
• /
• pp.9-15
• /
• 2006

결정질 암반에 위치한 가상의 방사성폐기물처분장에 대한 정확한 안전성 평가를 수행하기 위해서는 다공암반으로 대표되는 공학방벽 및 결정질 암반으로 대표되는 자연방벽을 모두 고려한 매질에서의 물질 거동 특성을 정확하게 모사하는 것이 중요하다. 본 논문에서는 단열-다공암반내 유동 및 물질전달의 정확한 해석을 위한 연결망 구축방법에 대하여 서술하였다. 실제 단열암반을 사실적으로 모사하기 위하여 단열 물성자료는 확률밀도함수를 이용하여 생성하였다. 2차원의 사각격자로 모사된 단열암반과 육면체로 모사된 다공암반간 교차선의 원활한 검색을 위하여 단열암반과 연결전 다공암반의 교차면에 가상의 단열암반을 추가적으로 도입하였다. 전체유동경로를 구성하기 저하여 생성된 단열들 간의 교차선을 효율적으로 검색할 수 있는 방법 및 단열암반 및 단열-다공암반간의 연결도를 신속히 확인하는 알고리즘을 제안하였다. 이러한 방법들은 추후 방사성폐기물처분장에서의 단열-다공 암반을 통한 핵종 이동 특성을 모사할 수 있는 수치코드 개발에 많은 도움을 줄 것으로 사료된다.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제5권1호
• /
• pp.55-78
• /
• 2001

Given the anisotropic Poisson equation $-{\nabla}{\cdot}{\mathcal{K}}{\nabla}p=f$, one can convert it into a system of two first order PDEs: the Darcy law for the flux $u=-{\mathcal{K}{\nabla}p$ and conservation of mass ${\nabla}{\cdot}u=f$. A very natural mixed finite volume method for this system is to seek the pressure in the nonconforming P1 space and the Darcy velocity in the lowest order Raviart-Thomas space. The equations for these variables are obtained by integrating the two first order systems over the triangular volumes. In this paper we show that such a method is really a standard finite element method with local recovery of the flux in disguise. As a consequence, we compare two approaches in analyzing finite volume methods (FVM) and shed light on the proper way of analyzing non co-volume type of FVM. Numerical results for Dirichlet and Neumann problems are included.

• 지구물리
• /
• 제6권3호
• /
• pp.131-137
• /
• 2003

In this paper the liquefaction of sand bed under oscillating water pressure are treated as a basic study of the prevention works against the scouring around the hydraulic structures. The results of the former resurch show that the occurrence of the liquefaction depends on both properties of the oscillating water pressure and of the sand layer. Considering the latter properties, that is , the resistivity against the liquefaction increases with the increase of the permeability of the sand bed, we propose the displcement method as one of the prevention works, which is a method to displace the upper layer of the sand bed by the sand with large permeability. The effects of this method are investigated theoretically and experimentally. By the experimental study, it is shown that the proposed displacement method has the apparent effect to prevent the liquefaction. The experimental results are explained fairly well by the theoretical analysis based on the theory of the flow through the elastic porous media.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2010년도 정기 학술대회
• /
• pp.60-63
• /
• 2010

일반적인 포화된 다공질 매체의 수치해석에서는 거시적 관점의 고체변형과 유체이동을 동시에 고려한 혼합유한요소방법(Mixed Finite Element Method)이 쓰인다. 그러나 고체변형이 거의 없는 상태에서 유체가 이동할 경우, 또는 고체변형과 유체유동이 거의 없고 외력에 의한 간극압만 존재할 경우 이를 혼합유한 요소방법으로 해석하기에는 요소 잠김(Element Locking)현상 때문에 매우 불안정하다. 본 논문에서 Park과 Tak(2010)이 제안한 비압축성, 비투과성 포화 다공질 매체의 해석기법인 Staggered Method를 소개하고 수치적 효율성을 높이기 위해 요소분할기술 중 하나인 FETI(Finite Element Tearing and Interconnecting) 기법의 접목을 제안하고자 한다.

• 대한지하수환경학회지
• /
• 제7권2호
• /
• pp.89-96
• /
• 2000

Slug시험은 수리전도도 예측에 가장 널리 쓰이는 편리한 대수층 실험법이다. Slug시험 중인 관측정 수위 변동은 관측정 반경, 스크린 길이, 다공 매질의 수리전도도와 비저유계수에 영향을 받는다. 이 연구에서는 유한요소기법을 이용한 새 slug시험 모델을 개발하고 그 유용성을 시험하였다. 모델에서 관측정의 수위변동과 다공매질내 지하수유동을 반복기법(iteration technique)을 적용하여, 스크린상의 유동량 측정으로 연결하였다. 이 모델의 수치적 정확도는 Cooper et al. (1967)의 분석해에 대해 검증되었다, 본 방법은 주변 모니터링이 가능한 slug시험의 시뮬레이션, 부분관통과 비저유 계수의 반영 등의 장점이 있다. Slug시험을 통한 다공매질 반영 범위는 비저유계수에 민감하다. 작은 비저유계수일수록 수두압 변화 전파범위가 커져 그 반영률이 증가한다. 관측정의 표준곡선 비교를 통해 비저유계수 예측이 어려우므로, 다공매질 내에서 관측된 수두변화의 표준곡선 활용이 유용할 것이다. 지하수유동의 수직 성분이 커질수록 관측정 수위 회복에 대한 비저유계수의 영향은 더 감소한다. 실제 관측정 주변의 수평-수직한 지하수 유동 해석시, 비저유계수의 무시와 관측데이터의 적용구간 선택에 의한 수리전도도 예측 편차는 거의 무시할 만하며, 수평유동의 경우 분석방법상 편차가 약간 발생한다.

• Interaction and multiscale mechanics
• /
• 제2권1호
• /
• pp.45-68
• /
• 2009

An aim of the study is to develop an efficient numerical simulation technique that can handle the two-scale analysis of fluid permeation filters fabricated by the partial sintering technique of small spherical ceramics. A solid-fluid mixture homogenization method is introduced to predict the mechanical characters such as rigidity and permeability of the porous ceramic filters from the micro-scale geometry and configuration of partially-sintered particles. An extended finite element (X-FE) discretization technique based on the enriched interpolations of respective characteristic functions at fluid-solid interfaces is proposed for the non-interface-fitted mesh solution of the micro-scale analysis that needs non-slip condition at the interface between solid and fluid phases of the unit cell. The homogenization and localization performances of the proposed method are shown in a typical two-dimensional benchmark problem whose model has a hole in center. Three-dimensional applications to the body-centered cubic (BCC) and face-centered cubic (FCC) unit cell models are also shown in the paper. The 3D application is prepared toward the computer-aided optimal design of ceramic filters. The accuracy and stability of the X-FEM based method are comparable to those of the standard interface-fitted FEM, and are superior to those of the voxel type FEM that is often used in such complex micro geometry cases.