• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2001년도 총회 및 춘계학술발표회
• /
• pp.132-135
• /
• 2001

To understand and compare tracer transport in fractured and porous media. multiple tracer tests were conducted in Wonju and Uiwang sites. The target media were fractured in Wonju site and porous in Uiwang site. It was known that groundwater flow for the two hydrogeologic systems could be represented using a EPM approach. However, the tracer transport in the two aquifer systems was greatly different. In this study, we analyzed the different tracer transport behavior in the two systems, from which our understanding of the tracer dispersion was greatly enhanced. we used bromide and chloride as tracers.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2004년도 임시총회 및 추계학술발표회
• /
• pp.25-28
• /
• 2004

The capillary number is used to represent the mobilization potential of organic phase trapped within porous media. The capillary number has been defined by three different forms, according to types of flow velocity and viscosity used in the definition of capillary number. This study evaluated the suitability of the capillary number definitions for representing TCE mobilization by constructing capillary number-TCE saturation relationships. The results implied that the capillary number should be correctly employed, according to interest of scale and fluid flow behavior. This study suggests that the pore-scale capillary number may be used only for investigating the organic-phase mobilization at the pore scale because it is defined by the pore-velocity and the dynamic viscosity. The Newtonian-fluid capillary number using Darcy velocity and the dynamic viscosity may be suitable to quantify flood systems representing Newtonian fluid behavior. For viscous-force modified flood systems such as surfactant-foam floods, the apparent capillary number definition employing macroscopic properties (permeability and potential gradient) may be used to appropriately represent the desaturation of organic-phases from porous media.

• Journal of Advanced Marine Engineering and Technology
• /
• 제20권5호
• /
• pp.68-75
• /
• 1996

The vacuum drying characteristics of water-saturated porous media were studied experimentally. The water-saturated porous media, water-saturated sand layer, was heated by the isothermal bottom wall of the rectangular vessel. The vacuum drying rate and temperature distribution of the sand layer were measured and calculated under a variety of conditions of heated wall temperature, vacuum rate, and thickness of the test material. It was found that the drying rate due to the heat and mass teansfer is greatly influenced by the heated wall temperature, vacuum rate, and thickness of the test material.

• 한국농공학회논문집
• /
• 제48권5호
• /
• pp.83-93
• /
• 2006

In unsaturated porous media, the air-water interface (AWI) plays an important role in removing of biocolloids such as bacteria, viruses, and protozoan (oo)cysts. In this study, four models related to calculation of specific AWI area are analyzed to determine the appropriate model, and the selected models are verified using the previously reported experimental data. The results indicate that the modified model from Niemet et al. (2002) is the most appropriate tool for calculating the specific AWI area using the van Genuchten (1980) parameters obtained from the water retention curve. Hence, it is expected that this model could be used to quantitatively determine the attachment of biocolloids to AWI in the transport modeling of biocolloids in unsaturated porous media.

• Interaction and multiscale mechanics
• /
• 제6권2호
• /
• pp.107-125
• /
• 2013

A strain smoothing meshfree formulation with stabilized conforming nodal integration is presented for modeling the consolidation process in saturated porous media. In the present method, nodal strain smoothing is consistently introduced into the meshfree approximation of strain and pore pressure gradient variables associated with the saturated porous media. Meanwhile, in order to achieve a consistent numerical implementation, a smoothing approximation of the meshfree shape function within a nodal representative domain is also proposed in the stiffness construction. The resulting discrete system of equations is all expressed in smoothed nodal measures that are very efficient for numerical evaluation. Subsequently the space-time fully discrete equations are further established by the generalized trapezoidal rule for time integration. The effectiveness of the proposed meshfree consolidation analysis method is systematically illustrated by several benchmark problems.

• 대한기계학회논문집B
• /
• 제35권8호
• /
• pp.815-823
• /
• 2011

다공성 물질 내부의 연소 현상은 저발열량 연료의 연소 및 연소열의 재생을 위한 수단으로 다양한 형태로 산업현장에 응용되고 있다. 하지만 다공성 물질 내부에서의 연소 현상은 직접적인 관찰이 힘들다는 점과 다공성 물질의 복잡한 내부 구조로 인해 매우 제한적인 연구가 진행되어 왔다. 본 연구에서는 복잡한 다공성 물질의 구조 내부에서의 화염의 안정화 특성에 관한 이해를 위해 내부 관찰이 가능하도록 다수의 석영판으로 구성된 다중채널 형태의 모형 연소기를 제안하고 이를 이용한 간단한 실험 결과를 제시한다. 그리고 이러한 다중채널내부 화염의 안정화에 관한 간단한 기초해석 모델을 제안한다. 다수의 채널 내부에 형성된 화염은 채널간의 열전달에 의해 화염의 공간 분포가 변화하고 그 결과로 연소기 내부의 가연한계에 변화가 발생한다. 채널의 재료 특성 및 당량비에 따른 가연한계의 변화를 제시하였으며, 이 결과는 다공성 연소기 내부화염의 이해에 도움될 것이다.

• 한국전산구조공학회논문집
• /
• 제23권4호
• /
• pp.361-368
• /
• 2010

본 논문에서는 Park and Tak(2010)이 제안한 다공질매체 스태거드 방법의 효율성을 제고하기 위해 MPI(Message- Passing Interface) 라이브러리를 통한 병렬해석이 소개된다. 이를 위해 비압축, 비투과성 포화 다공질매체와 FEM을 통한 스태거드 방법이 간략히 소개된다. 그리고 병렬해석을 위한 MPI 라이브러리를 소개하고 스태거드 방법에 블록킹, 논블록킹 MPI 라이브러리를 접목시킨 병렬해석 알고리즘을 제안한다. 여기서는 변위와 간극수압 계산에서의 CPU 할당방법과 MPI 통신 규약을 통한 효율적인 프로그래밍 방법을 제시하고, 수치효율성을 검증하기 위한 2차원 모델의 순차해석과 병렬 해석 결과 값들을 요소개수에 따라 계산시간이 비교 검증된다.

• 한국가스학회지
• /
• 제17권1호
• /
• pp.26-34
• /
• 2013

상 변화(phase change)를 수반한 다상 유동 연구(multiphase flow analysis)는 증발, 응축과 같은 많은 분야에 적용, 응용될 수 있고 현상의 복잡성 때문에 많은 연구의 관심을 받고 있는 분야이다. 본 연구에서는 극저온 유체인 액화질소가 다양한 밀도의 글라스 울 내부 다공성 매질속으로 스며들면서 나타나는 거동을 살펴보았다. 유동에 영향을 미치는 투과성 계수에 대해서, 외부 압력의 영향성에 대한 실험을 진행하였고 논의하였다. 극저온 유체인 액화질소를 실험유체로 사용하여 사각 기둥 실린더 내부의 유체의 유동에 대한 실험으로 유체의 유동을 살펴보았다. 그 결과 벌크 밀도가 커짐에 따라 투과성 계수가 작아지고, 거리에 따른 압력변화의 비선형성이 커짐을 보였다. 마지막으로 CFD 전산유동 프로그램으로 실험결과와 동일한 상황을 모사하였으며, 이를 실험결과와 비교 분석하였다. 이에 대한 검증결과, 시뮬레이션 결과가 실험결과와 유사한 경향과 결과를 보여주었다.

• Interaction and multiscale mechanics
• /
• 제1권1호
• /
• pp.83-101
• /
• 2008

A derivation is given of two-scale models that are able to describe deformation and flow in a fluid-saturated and progressively fracturing porous medium. From the micromechanics of the flow in the cavity, identities are derived that couple the local momentum and the mass balances to the governing equations for a fluid-saturated porous medium, which are assumed to hold on the macroscopic scale. By exploiting the partition-of-unity property of the finite element shape functions, the position and direction of the fractures are independent from the underlying discretization. The finite element equations are derived for this two-scale approach and integrated over time. The resulting discrete equations are nonlinear due to the cohesive crack model and the nonlinearity of the coupling terms. A consistent linearization is given for use within a Newton-Raphson iterative procedure. Finally, examples are given to show the versatility and the efficiency of the approach.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.241-246
• /
• 2000

Gas hydrates are solid solutions when water molecules are linked through hydrogen bondin create host lattice cavities that can enclose a large variety of guest gas molecules. The natural hydrate crystal may exist at low temperature above the normal freezing point of water and pressure greater than about 30 bars. A lot of quantities of natural gas hydrates exists in the ear many production schemes are being studied. In the present investigation, depressurization method considered to predict the production of gas and the simulation of the two phase flow - gas and - in porous media is being carried out. The simulation show about the fluid flow in porous have a variety of applications in industry. Results provide the appearance of gas and water prod the pressure profile, the saturation of gas/ water/ hydrates profiles and the location of the pl front.